scholarly journals Evaluation of Cirrus Parameterizations for Radiative Flux Computations in Climate Models Using TOVS–ScaRaB Satellite Observations

2007 ◽  
Vol 20 (17) ◽  
pp. 4459-4475 ◽  
Author(s):  
C. J. Stubenrauch ◽  
F. Eddounia ◽  
J. M. Edwards ◽  
A. Macke
Keyword(s):  
Optical Properties ◽  
Radiative Transfer ◽  
Climate Models ◽  
Radiative Flux ◽  
Satellite Observations ◽  
Radiation Budget ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Ice Crystal ◽  
Infrared Observation

Abstract Combined simultaneous satellite observations are used to evaluate the performance of parameterizations of the microphysical and optical properties of cirrus clouds used for radiative flux computations in climate models. Atmospheric and cirrus properties retrieved from Television and Infrared Observation Satellite (TIROS-N) Operational Vertical Sounder (TOVS) observations are given as input to the radiative transfer model developed for the Met Office climate model to simulate radiative fluxes at the top of the atmosphere (TOA). Simulated cirrus shortwave (SW) albedos are then compared to those retrieved from collocated Scanner for Radiation Budget (ScaRaB) observations. For the retrieval, special care has been given to angular direction models. Three parameterizations of cirrus ice crystal optical properties are represented in the Met Office radiative transfer model. These parameterizations are based on different physical approximations and different hypotheses on crystal habit. One parameterization assumes pristine ice crystals and two ice crystal aggregates. By relating the cirrus ice water path (IWP) retrieved from the effective infrared emissivity to the cirrus SW albedo, differences between the parameterizations are amplified. This study shows that pristine crystals seem to be plausible only for cirrus with IWP less than 30 g m−2. For larger IWP, ice crystal aggregates lead to cirrus SW albedos in better agreement with the observations. The data also indicate that climate models should allow the cirrus effective ice crystal diameter (De) to increase with IWP, especially in the range up to 30 g m−2. For cirrus with IWP less than 20 g m−2, this would lead to SW albedos that are about 0.02 higher than the ones of a constant De of 55 μm.

scholarly journals Importance of radiative transfer processes in urban climate models: a study based on the PALM 6.0 model system

2022 ◽  
Vol 15 (1) ◽  
pp. 145-171
Author(s):  
Mohamed H. Salim ◽  
Sebastian Schubert ◽  
Jaroslav Resler ◽  
Pavel Krč ◽  
Björn Maronga ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Flow Field ◽  
Climate Models ◽  
Urban Climate ◽  
Longwave Radiation ◽  
Radiation Budget ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Canopy Layer ◽  
Transfer Processes

Abstract. Including radiative transfer processes within the urban canopy layer into microscale urban climate models (UCMs) is essential to obtain realistic model results. These processes include the interaction of buildings and vegetation with shortwave and longwave radiation, thermal emission, and radiation reflections. They contribute differently to the radiation budget of urban surfaces. Each process requires different computational resources and physical data for the urban elements. This study investigates how much detail modellers should include to parameterize radiative transfer in microscale building-resolving UCMs. To that end, we introduce a stepwise parameterization method to the Parallelized Large-eddy Simulation Model (PALM) system 6.0 to quantify individually the effects of the main radiative transfer processes on the radiation budget and on the flow field. We quantify numerical simulations of both simple and realistic urban configurations to identify the major and the minor effects of radiative transfer processes on the radiation budget. The study shows that processes such as surface and vegetation interaction with shortwave and longwave radiation will have major effects, while a process such as multiple reflections will have minor effects. The study also shows that radiative transfer processes within the canopy layer implicitly affect the incoming radiation since the radiative transfer model is coupled to the radiation model. The flow field changes considerably in response to the radiative transfer processes included in the model. The study identified those processes which are essentially needed to assure acceptable quality of the flow field. These processes are receiving radiation from atmosphere based on the sky-view factors, interaction of urban vegetation with radiation, radiative transfer among urban surfaces, and considering at least single reflection of radiation. Omitting any of these processes may lead to high uncertainties in the model results.

Evaluation of shortwave radiation fluxes in the multi-layer SPARTACUS-Urban scheme using DART

2021 ◽  
Author(s):  
Megan Stretton ◽  
William Morrison ◽  
Robin Hogan ◽  
Sue Grimmond
Keyword(s):  
Radiative Transfer ◽  
Urban Form ◽  
Climate Models ◽  
Weather Prediction ◽  
Computational Cost ◽  
Three Dimensional ◽  
Shortwave Radiation ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Urban Structure

<p>The heterogenous structure of cities impacts radiative exchanges (e.g. albedo and heat storage). Numerical weather prediction (NWP) models often characterise the urban structure with an infinite street canyon – but this does not capture the three-dimensional urban form. SPARTACUS-Urban (SU) - a fast, multi-layer radiative transfer model designed for NWP - is evaluated using the explicit Discrete Anisotropic Radiative Transfer (DART) model for shortwave fluxes across several model domains – from a regular array of cubes to real cities .</p><p>SU agrees with DART (errors < 5.5% for all variables) when the SU assumptions of building distribution are fulfilled (e.g. randomly distribution). For real-world areas with pitched roofs, SU underestimates the albedo (< 10%) and shortwave transmission to the surface (< 15%), and overestimates wall-plus-roof absorption (9-27%), with errors increasing with solar zenith angle. SU should be beneficial to weather and climate models, as it allows more realistic urban form (cf. most schemes) without large increases in computational cost.</p>

scholarly journals Comparison of PARASOL Observations with Polarized Reflectances Simulated Using Different Ice Habit Mixtures

2013 ◽  
Vol 52 (1) ◽  
pp. 186-196 ◽  
Author(s):  
Benjamin H. Cole ◽  
Ping Yang ◽  
Bryan A. Baum ◽  
Jerome Riedi ◽  
Laurent C.-Labonnote ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Ice Crystal ◽  
Ice Clouds ◽  
Atmospheric Sciences ◽  
Reflection Data ◽  
Moderate Resolution ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Polarized Reflectance

AbstractInsufficient knowledge of the habit distribution and the degree of surface roughness of ice crystals within ice clouds is a source of uncertainty in the forward light scattering and radiative transfer simulations of ice clouds used in downstream applications. The Moderate Resolution Imaging Spectroradiometer (MODIS) collection-5 ice microphysical model presumes a mixture of various ice crystal shapes with smooth facets, except for the compact aggregate of columns for which a severely rough condition is assumed. When compared with Polarization and Anisotropy of Reflectances for Atmospheric Sciences coupled with Observations from a Lidar (PARASOL) polarized reflection data, simulations of polarized reflectance using smooth particles show a poor fit to the measurements, whereas very rough-faceted particles provide an improved fit to the polarized reflectance. In this study a new microphysical model based on a mixture of nine different ice crystal habits with severely roughened facets is developed. Simulated polarized reflectance using the new ice habit distribution is calculated using a vector adding–doubling radiative transfer model, and the simulations closely agree with the polarized reflectance observed by PARASOL. The new general habit mixture is also tested using a spherical albedo differences analysis, and surface roughening is found to improve the consistency of multiangular observations. These results are consistent with previous studies that have used polarized reflection data. It is suggested that an ice model incorporating an ensemble of different habits with severely roughened surfaces would potentially be an adequate choice for global ice cloud retrievals.

scholarly journals Sensitivity of satellite observations for freshly produced lightning NO<sub>x</sub>

2009 ◽  
Vol 9 (3) ◽  
pp. 1077-1094 ◽  
Author(s):  
S. Beirle ◽  
M. Salzmann ◽  
M. G. Lawrence ◽  
T. Wagner
Keyword(s):  
Radiative Transfer ◽  
Satellite Observations ◽  
Radiative Transfer Model ◽  
Visible Range ◽  
Transfer Model ◽  
Satellite Measurements ◽  
Vertical Column ◽  
Toga Coare ◽  
Photo Chemistry ◽  
Lightning Nox

Abstract. In this study, we analyse the sensitivity of nadir viewing satellite observations in the visible range to freshly produced lightning NOx. This is a particular challenge due to the complex and highly variable conditions of meteorology, (photo-) chemistry, and radiative transfer in and around cumulonimbus clouds. For the first time, such a study is performed accounting for photo-chemistry, dynamics, and radiative transfer in a consistent way: A one week episode in the TOGA COARE/CEPEX region (Pacific) in December 1992 is simulated with a 3-D cloud resolving chemistry model. The simulated hydrometeor mixing ratios are fed into a Monte Carlo radiative transfer model to calculate box-Air Mass Factors (box-AMFs) for NO2. From these box-AMFs, together with model NOx profiles, slant columns of NO2 (SNO2), i.e. synthetic satellite measurements, are calculated and set in relation to the actual model NOx vertical column (VNOx), yielding the "sensitivity" SNO2/VNOx. From this study, we find a mean sensitivity of 0.46. NOx below the cloud bottom is mostly present as NO2, but shielded from the satellites' view, whereas NOx at the cloud top or above is shifted to NO due to high photolysis and low temperature, and hence not detectable from space. However, a significant fraction of the lightning produced NOx in the middle part of the cloud is present as NO2 and has a good visibility from space. Due to the resulting total sensitivity being quite high, nadir viewing satellites provide a valuable additional platform to quantify NOx production by lightning; strong lightning events over "clean" regions should be clearly detectable in satellite observations. Since the observed enhancement of NO2 column densities over mesoscale convective systems are lower than expected for current estimates of NOx production per flash, satellite measurements can in particular constrain the upper bound of lightning NOx production estimates.

scholarly journals Mesoscale Simulations of Australian Direct Normal Irradiance, Featuring an Extreme Dust Event

2018 ◽  
Vol 57 (3) ◽  
pp. 493-515 ◽  
Author(s):  
S. K. Mukkavilli ◽  
A. A. Prasad ◽  
R. A. Taylor ◽  
A. Troccoli ◽  
M. J. Kay
Keyword(s):  
Radiative Transfer ◽  
Climate Models ◽  
Global Climate ◽  
Weather Prediction ◽  
Wrf Model ◽  
Global Climate Models ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Dust Event ◽  
Direct Normal Irradiance

AbstractDirect normal irradiance (DNI) is the main input for concentrating solar power (CSP) technologies—an important component in future energy scenarios. DNI forecast accuracy is sensitive to radiative transfer schemes (RTSs) and microphysics in numerical weather prediction (NWP) models. Additionally, NWP models have large regional aerosol uncertainties. Dust aerosols can significantly attenuate DNI in extreme cases, with marked consequences for applications such as CSP. To date, studies have not compared the skill of different physical parameterization schemes for predicting hourly DNI under varying aerosol conditions over Australia. The authors address this gap by aiming to provide the first Weather and Forecasting (WRF) Model DNI benchmarks for Australia as baselines for assessing future aerosol-assimilated models. Annual and day-ahead simulations against ground measurements at selected sites focusing on an extreme dust event are run. Model biases are assessed for five shortwave RTSs at 30- and 10-km grid resolutions, along with the Thompson aerosol-aware scheme in three different microphysics configurations: no aerosols, fixed optical properties, and monthly climatologies. From the annual simulation, the best schemes were the Rapid Radiative Transfer Model for global climate models (RRTMG), followed by the new Goddard and Dudhia schemes, despite the relative simplicity of the latter. These top three RTSs all had 1.4–70.8 W m−2 lower mean absolute error than persistence. RRTMG with monthly aerosol climatologies was the best combination. The extreme dust event had large DNI mean bias overpredictions (up to 4.6 times), compared to background aerosol results. Dust storm–aware DNI forecasts could benefit from RRTMG with high-resolution aerosol inputs.

scholarly journals Aerosol trends as a potential driver of regional climate in the central United States: evidence from observations

2017 ◽  
Vol 17 (22) ◽  
pp. 13559-13572 ◽  
Author(s):  
Daniel H. Cusworth ◽  
Loretta J. Mickley ◽  
Eric M. Leibensperger ◽  
Michael J. Iacono
Keyword(s):  
United States ◽  
Radiative Transfer ◽  
Southeastern United States ◽  
Radiant Energy ◽  
Surface Radiation ◽  
Radiation Budget ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Clear Sky

Abstract. In situ surface observations show that downward surface solar radiation (SWdn) over the central and southeastern United States (US) has increased by 0.58–1.0 Wm−2 a−1 over the 2000–2014 time frame, simultaneously with reductions in US aerosol optical depth (AOD) of 3.3–5.0  ×  10−3 a−1. Establishing a link between these two trends, however, is challenging due to complex interactions between aerosols, clouds, and radiation. Here we investigate the clear-sky aerosol–radiation effects of decreasing US aerosols on SWdn and other surface variables by applying a one-dimensional radiative transfer to 2000–2014 measurements of AOD at two Surface Radiation Budget Network (SURFRAD) sites in the central and southeastern United States. Observations characterized as clear-sky may in fact include the effects of thin cirrus clouds, and we consider these effects by imposing satellite data from the Clouds and Earth's Radiant Energy System (CERES) into the radiative transfer model. The model predicts that 2000–2014 trends in aerosols may have driven clear-sky SWdn trends of +1.35 Wm−2 a−1 at Goodwin Creek, MS, and +0.93 Wm−2 a−1 at Bondville, IL. While these results are consistent in sign with observed trends, a cross-validated multivariate regression analysis shows that AOD reproduces 20–26 % of the seasonal (June–September, JJAS) variability in clear-sky direct and diffuse SWdn at Bondville, IL, but none of the JJAS variability at Goodwin Creek, MS. Using in situ soil and surface flux measurements from the Ameriflux network and Illinois Climate Network (ICN) together with assimilated meteorology from the North American Land Data Assimilation System (NLDAS), we find that sunnier summers tend to coincide with increased surface air temperature and soil moisture deficits in the central US. The 1990–2015 trends in the NLDAS SWdn over the central US are also of a similar magnitude to our modeled 2000–2014 clear-sky trends. Taken together, these results suggest that climate and regional hydrology in the central US are sensitive to the recent reductions in aerosol concentrations. Our work has implications for severely polluted regions outside the US, where improvements in air quality due to reductions in the aerosol burden could inadvertently pose an enhanced climate risk.

scholarly journals An Assessment of SAPHIR Calibration Using Quality Tropical Soundings

2015 ◽  
Vol 32 (1) ◽  
pp. 61-78 ◽  
Author(s):  
G. Clain ◽  
H. Brogniez ◽  
V. H. Payne ◽  
V. O. John ◽  
M. Luo
Keyword(s):  
Radiative Transfer ◽  
Incidence Angle ◽  
Intraseasonal Variability ◽  
Sensor Data ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Water Vapor Absorption ◽  
Infrared Observation ◽  
Cross Track

AbstractThe Sondeur Atmosphérique du Profil d’Humidité Intertropicale par Radiométrie (SAPHIR) instrument on board the Megha-Tropiques (MT) platform is a cross-track, multichannel microwave humidity sounder with six channels near the 183.31-GHz water vapor absorption line, a maximum scan angle of 42.96° (resulting in a maximum incidence angle of 50.7°), a 1700-km-wide swath, and a footprint resolution of 10 km at nadir. SAPHIR L1A2 brightness temperature (BT) observations have been compared to BTs simulated by the radiative transfer model (RTM) Radiative Transfer for the Television and Infrared Observation Satellite (TIROS) Operational Vertical Sounder (RTTOV-10), using in situ measurements from radiosondes as input. Selected radiosonde humidity observations from the Cooperative Indian Ocean Experiment on Intraseasonal Variability in the Year (CINDY)–Dynamics of the Madden–Julian Oscillation (DYNAMO) campaign (September 2011–March 2012) were spatiotemporally collocated with MT overpasses. Although several sonde systems were used during the campaign, all of the sites selected for this study used the Vaisala RS92-SGPD system and were chosen in order to avoid discrepancies in data quality and biases.To interpret the results of the comparison between the sensor data and the RTM simulations, uncertainties associated with the data processing must be propagated throughout the evaluation. The magnitude of the bias was found to be dependent on the observing channel, increasing from 0.18 K for the 183.31 ± 0.2-GHz channel to 2.3 K for the 183.31 ± 11-GHz channel. Uncertainties and errors that could impact the BT biases were investigated. These can be linked to the RTM input and design, the radiosonde observations, the chosen methodology of comparison, and the SAPHIR instrument itself.

scholarly journals Performance of the Line-By-Line Radiative Transfer Model (LBLRTM) for temperature, water vapor, and trace gas retrievals: recent updates evaluated with IASI case studies

2013 ◽  
Vol 13 (14) ◽  
pp. 6687-6711 ◽  
Author(s):  
M. J. Alvarado ◽  
V. H. Payne ◽  
E. J. Mlawer ◽  
G. Uymin ◽  
M. W. Shephard ◽  
...  
Keyword(s):  
Water Vapor ◽  
Radiative Transfer ◽  
Fixed Ratio ◽  
Satellite Observations ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Temperature Profiles ◽  
A Posteriori ◽  
The Impact ◽  
Temperature Water

Abstract. Modern data assimilation algorithms depend on accurate infrared spectroscopy in order to make use of the information related to temperature, water vapor (H2O), and other trace gases provided by satellite observations. Reducing the uncertainties in our knowledge of spectroscopic line parameters and continuum absorption is thus important to improve the application of satellite data to weather forecasting. Here we present the results of a rigorous validation of spectroscopic updates to an advanced radiative transfer model, the Line-By-Line Radiative Transfer Model (LBLRTM), against a global dataset of 120 near-nadir, over-ocean, nighttime spectra from the Infrared Atmospheric Sounding Interferometer (IASI). We compare calculations from the latest version of LBLRTM (v12.1) to those from a previous version (v9.4+) to determine the impact of spectroscopic updates to the model on spectral residuals as well as retrieved temperature and H2O profiles. We show that the spectroscopy in the CO2 ν2 and ν3 bands is significantly improved in LBLRTM v12.1 relative to v9.4+, and that these spectroscopic updates lead to mean changes of ~0.5 K in the retrieved vertical temperature profiles between the surface and 10 hPa, with the sign of the change and the variability among cases depending on altitude. We also find that temperature retrievals using each of these two CO2 bands are remarkably consistent in LBLRTM v12.1, potentially allowing these bands to be used to retrieve atmospheric temperature simultaneously. The updated H2O spectroscopy in LBLRTM v12.1 substantially improves the a posteriori residuals in the P-branch of the H2O ν2 band, while the improvements in the R-branch are more modest. The H2O amounts retrieved with LBLRTM v12.1 are on average 14% lower between 100 and 200 hPa, 42% higher near 562 hPa, and 31% higher near the surface compared to the amounts retrieved with v9.4+ due to a combination of the different retrieved temperature profiles and the updated H2O spectroscopy. We also find that the use of a fixed ratio of HDO to H2O in LBLRTM may be responsible for a significant fraction of the remaining bias in the P-branch relative to the R-branch of the H2O ν2 band. There were no changes to O3 spectroscopy between the two model versions, and so both versions give positive a posteriori residuals of ~ 0.3 K in the R-branch of the O3 ν3 band. While the updates to the H2O self-continuum employed by LBLRTM v12.1 have clearly improved the match with observations near the CO2 ν3 band head, we find that these updates have significantly degraded the match with observations in the fundamental band of CO. Finally, significant systematic a posteriori residuals remain in the ν4 band of CH4, but the magnitude of the positive bias in the retrieved mixing ratios is reduced in LBLRTM v12.1, suggesting that the updated spectroscopy could improve retrievals of CH4 from satellite observations.

Sign in / Sign up

Export Citation Format

Share Document