scholarly journals Thermal Inertia Approach Using a Heat Budget Model to Estimate the Spatial Distribution of Surface Soil Moisture over a Semiarid Grassland in Central Mongolia

2018 ◽  
Vol 19 (1) ◽  
pp. 245-265 ◽  
Author(s):  
Dai Matsushima ◽  
Jun Asanuma ◽  
Ichirow Kaihotsu
Keyword(s):  
Time Series ◽  
Soil Moisture ◽  
Surface Soil ◽  
Heat Budget ◽  
Atmospheric Stability ◽  
Thermal Inertia ◽  
In Situ Observation ◽  
Surface Soil Moisture ◽  
Budget Model

Abstract Thermal inertia is a physical parameter that evaluates soil thermal properties with an emphasis on the stability of the temperature when the soil is affected by heating/cooling. Thermal inertia can be retrieved from a heat budget formulation as a parameter when the time series of Earth surface temperature and forcing variables, such as insolation and air temperature, are given. In this study, a two-layer, linearized heat budget model was employed for the retrieval of thermal inertia over a grassland in a semiarid region. Application of different formulations to the aerodynamic conductance with respect to atmospheric stability significantly improved the accuracy of the thermal inertia retrieval. The retrieved values of thermal inertia were well correlated with in situ surface soil moisture at multiple ground stations. The daily time series of thermal inertia–derived soil moisture qualitatively agreed well with in situ soil moisture after antecedent rainfalls, which was found after fitting the time series to an exponentially decaying function. On the contrary, AMSR2 soil moisture mostly did not agree with in situ soil moisture. The results of the estimation showed high accuracy: the root-mean-square error was 0.038 m3 m−3 compared to the in situ data and was applied to an area of 2° × 2° in which the in situ observation locations were included. The spatiotemporal distribution of surface soil moisture was mapped at a 0.03° × 0.03° spatial resolution in the study area as 10- or 11-day averages over a vegetation growth period of 2012.

scholarly journals Satellite soil moisture data assimilation for improved operational continental water balance prediction

2020 ◽  
Author(s):  
Siyuan Tian ◽  
Luigi J. Renzullo ◽  
Robert C. Pipunic ◽  
Julien Lerat ◽  
Wendy Sharples ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Water Balance ◽  
Surface Soil ◽  
Root Zone ◽  
In Situ Observation ◽  
Surface Soil Moisture ◽  
Time Step ◽  
Australian Water

Abstract. A simple and effective two-step data assimilation framework was developed to improve soil moisture representation in an operational large-scale water balance model. The first step is the sequential state updating process that exploits temporal covariance statistics between modelled and satellite-derived soil moisture to produce analysed estimates. The second step is to use analysed surface moisture estimates to impart mass conservation constraints (mass redistribution) on related states and fluxes of the model in a post-analysis adjustment after the state updating at each time step. In this study, we apply the data assimilation framework to the Australian Water Resources Assessment Landscape model (AWRA-L) and evaluate its impact on the model's accuracy against in-situ observations across water balance components. We show that the correlation between simulated surface soil moisture and in-situ observation increases from 0.54 (open-loop) to 0.77 (data assimilation). Furthermore, indirect verification of root-zone soil moisture using remotely sensed vegetation time series across cropland areas results in significant improvements of 0.11 correlation units. The improvements gained from data assimilation can persist for more than one week in surface soil moisture estimates and one month in root-zone soil moisture estimates, thus demonstrating the efficacy of this data assimilation framework.

scholarly journals Satellite soil moisture data assimilation for improved operational continental water balance prediction

2021 ◽  
Vol 25 (8) ◽  
pp. 4567-4584
Author(s):  
Siyuan Tian ◽  
Luigi J. Renzullo ◽  
Robert C. Pipunic ◽  
Julien Lerat ◽  
Wendy Sharples ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Water Balance ◽  
Surface Soil ◽  
Root Zone ◽  
In Situ Observation ◽  
Surface Soil Moisture ◽  
Time Step ◽  
Australian Water

Abstract. A simple and effective two-step data assimilation framework was developed to improve soil moisture representation in an operational large-scale water balance model. The first step is a Kalman-filter-type sequential state updating process that exploits temporal covariance statistics between modelled and satellite-derived soil moisture to produce analysed estimates. The second step is to use analysed surface moisture estimates to impart mass conservation constraints (mass redistribution) on related states and fluxes of the model using tangent linear modelling theory in a post-analysis adjustment after the state updating at each time step. In this study, we assimilate satellite soil moisture retrievals from both Soil Moisture Active Passive (SMAP) and Soil Moisture and Ocean Salinity (SMOS) missions simultaneously into the Australian Water Resources Assessment Landscape model (AWRA-L) using the proposed framework and evaluate its impact on the model's accuracy against in situ observations across water balance components. We show that the correlation between simulated surface soil moisture and in situ observation increases from 0.54 (open loop) to 0.77 (data assimilation). Furthermore, indirect verification of root-zone soil moisture using remotely sensed Enhanced Vegetation Index (EVI) time series across cropland areas results in significant improvements from 0.52 to 0.64 in correlation. The improvements gained from data assimilation can persist for more than 1 week in surface soil moisture estimates and 1 month in root-zone soil moisture estimates, thus demonstrating the efficacy of this data assimilation framework.

scholarly journals Calibration of a large-scale hydrological model using satellite-based soil moisture and evapotranspiration products

2017 ◽  
Author(s):  
Patricia Lopez Lopez ◽  
Edwin Sutanudjaja ◽  
Jaap Schellekens ◽  
Geert Sterk ◽  
Marc Bierkens
Keyword(s):  
Time Series ◽  
Soil Moisture ◽  
Large Scale ◽  
Hydrological Model ◽  
Surface Soil ◽  
River Basins ◽  
Model Parameters ◽  
Surface Soil Moisture ◽  
Earth Observations

Abstract. A considerable number of river basins around the world lack sufficient ground observations of hydro-meteorological data for effective water resources assessment and management. Several approaches can be developed to increase the quality and availability of data in these poorly gauged or ungauged river basins, and among those, the use of earth observations products has recently become promising. Earth observations of various environmental variables can be used potentially to increase the knowledge about the hydrological processes in the basin and to improve streamflow model estimates, via assimilation or calibration. The present study aims to calibrate the large-scale hydrological model PCR-GLOBWB using satellite-based products of evapotranspiration and soil moisture for the Moroccan Oum Er Rbia basin. Daily simulations at a spatial resolution of 5 arcmin × 5 arcmin are performed with varying parameters values for the 32-year period 1979–2010. Five different calibration scenarios are inter-compared: (i) reference scenario using the hydrological model with the standard parameterization, (ii) calibration using in-situ observed discharge time series, (iii) calibration using GLEAM actual evapotranspiration time series, (iv) calibration using ESA CCI surface soil moisture time series and (v) step-wise calibration using GLEAM actual evapotranspiration and ESA CCI surface soil moisture time series. The impact on discharge estimates of precipitation in comparison with model parameters calibration is investigated using three global precipitation products, including EI, WFDEI and MSWEP. Results show that GLEAM evapotranspiration and ESA CCI soil moisture may be used for model calibration resulting in reasonable discharge estimates (NSE values from 0.5 to 0.75), although better model performance is achieved when the model is calibrated with in-situ streamflow observations. Independent calibration based on only evapotranspiration or soil moisture observations improves model predictions to a lesser extent. Precipitation input affects to discharge estimates more than calibrating model parameters. The use of WFDEI precipitation leads to the lowest model performances. Apart from the in-situ discharge calibration scenario, the highest discharge improvement is obtained when EI and MSWEP precipitation products are used in combination with a step-wise calibration approach based on evapotranspiration and soil moisture observations. This study opens up the possibility to use globally available earth observations and reanalysis products of precipitation, evapotranspiration and soil moisture into large-scale hydrological models to estimate discharge at a river basin scale.

scholarly journals Calibration of a large-scale hydrological model using satellite-based soil moisture and evapotranspiration products

2017 ◽  
Vol 21 (6) ◽  
pp. 3125-3144 ◽  
Author(s):  
Patricia López López ◽  
Edwin H. Sutanudjaja ◽  
Jaap Schellekens ◽  
Geert Sterk ◽  
Marc F. P. Bierkens
Keyword(s):  
Time Series ◽  
Soil Moisture ◽  
Large Scale ◽  
Hydrological Model ◽  
Surface Soil ◽  
Reanalysis Data ◽  
Model Parameters ◽  
Surface Soil Moisture ◽  
Earth Observations

Abstract. A considerable number of river basins around the world lack sufficient ground observations of hydro-meteorological data for effective water resources assessment and management. Several approaches can be developed to increase the quality and availability of data in these poorly gauged or ungauged river basins; among them, the use of Earth observations products has recently become promising. Earth observations of various environmental variables can be used potentially to increase knowledge about the hydrological processes in the basin and to improve streamflow model estimates, via assimilation or calibration. The present study aims to calibrate the large-scale hydrological model PCRaster GLOBal Water Balance (PCR-GLOBWB) using satellite-based products of evapotranspiration and soil moisture for the Moroccan Oum er Rbia River basin. Daily simulations at a spatial resolution of 5  ×  5 arcmin are performed with varying parameters values for the 32-year period 1979–2010. Five different calibration scenarios are inter-compared: (i) reference scenario using the hydrological model with the standard parameterization, (ii) calibration using in situ-observed discharge time series, (iii) calibration using the Global Land Evaporation Amsterdam Model (GLEAM) actual evapotranspiration time series, (iv) calibration using ESA Climate Change Initiative (CCI) surface soil moisture time series and (v) step-wise calibration using GLEAM actual evapotranspiration and ESA CCI surface soil moisture time series. The impact on discharge estimates of precipitation in comparison with model parameters calibration is investigated using three global precipitation products, including ERA-Interim (EI), WATCH Forcing methodology applied to ERA-Interim reanalysis data (WFDEI) and Multi-Source Weighted-Ensemble Precipitation data by merging gauge, satellite and reanalysis data (MSWEP). Results show that GLEAM evapotranspiration and ESA CCI soil moisture may be used for model calibration resulting in reasonable discharge estimates (NSE values from 0.5 to 0.75), although better model performance is achieved when the model is calibrated with in situ streamflow observations. Independent calibration based on only evapotranspiration or soil moisture observations improves model predictions to a lesser extent. Precipitation input affects discharge estimates more than calibrating model parameters. The use of WFDEI precipitation leads to the lowest model performances. Apart from the in situ discharge calibration scenario, the highest discharge improvement is obtained when EI and MSWEP precipitation products are used in combination with a step-wise calibration approach based on evapotranspiration and soil moisture observations. This study opens up the possibility of using globally available Earth observations and reanalysis products of precipitation, evapotranspiration and soil moisture in large-scale hydrological models to estimate discharge at a river basin scale.

Combining Sentinel-1 and ALOS-2 observations for soil moisture retrieval

2021 ◽  
Author(s):  
Anna Balenzano ◽  
Giuseppe Satalino ◽  
Francesco Lovergine ◽  
Davide Palmisano ◽  
Francesco Mattia ◽  
...  
Keyword(s):  
Time Series ◽  
Soil Moisture ◽  
Temporal Resolution ◽  
Surface Soil ◽  
Earth Science ◽  
Observation System ◽  
Final Report ◽  
Surface Soil Moisture ◽  
Error Characterization ◽  
L Band

<p>One of the limitations of presently available Synthetic Aperture Radar (SAR) surface soil moisture (SSM) products is their moderated temporal resolution (e.g., 3-4 days) that is non optimal for several applications, as most user requirements point to a temporal resolution of 1-2 days or less. A possible path to tackle this issue is to coordinate multi-mission SAR acquisitions with a view to the future Copernicus Sentinel-1 (C&D and Next Generation) and L-band Radar Observation System for Europe (ROSE-L).</p><p>In this respect, the recent agreement between the Japanese (JAXA) and European (ESA) Space Agencies on the use of SAR Satellites in Earth Science and Applications provides a framework to develop and validate multi-frequency and multi-platform SAR SSM products. In 2019 and 2020, to support insights on the interoperability between C- and L-band SAR observations for SSM retrieval, Sentinel-1 and ALOS-2 systematic acquisitions over the TERENO (Terrestrial Environmental Observatories) Selhausen (Germany) and Apulian Tavoliere (Italy) cal/val sites were gathered. Both sites are well documented and equipped with hydrologic networks.</p><p>The objective of this study is to investigate the integration of multi-frequency SAR measurements for a consistent and harmonized SSM retrieval throughout the error characterization of a combined C- and L-band SSM product. To this scope, time series of Sentinel-1 IW and ALOS-2 FBD data acquired over the two sites will be analysed. The short time change detection (STCD) algorithm, developed, implemented and recently assessed on Sentinel-1 data [e.g., Balenzano et al., 2020; Mattia et al., 2020], will be tailored to the ALOS-2 data. Then, the time series of SAR SSM maps from each SAR system will be derived separately and aggregated in an interleaved SSM product. Furthermore, it will be compared against in situ SSM data systematically acquired by the ground stations deployed at both sites. The study will assess the interleaved SSM product and evaluate the homogeneous quality of C- and L-band SAR SSM maps.</p><p> </p><p> </p><p>References</p><p>Balenzano. A., et al., “Sentinel-1 soil moisture at 1km resolution: a validation study”, submitted to Remote Sensing of Environment (2020).</p><p>Mattia, F., A. Balenzano, G. Satalino, F. Lovergine, A. Loew, et al., “ESA SEOM Land project on Exploitation of Sentinel-1 for Surface Soil Moisture Retrieval at High Resolution,” final report, contract number 4000118762/16/I-NB, 2020.</p>

scholarly journals From near-surface to root-zone soil moisture using an exponential filter: an assessment of the method based on in-situ observations and model simulations

2008 ◽  
Vol 12 (6) ◽  
pp. 1323-1337 ◽  
Author(s):  
C. Albergel ◽  
C. Rüdiger ◽  
T. Pellarin ◽  
J.-C. Calvet ◽  
N. Fritz ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Soil Water ◽  
Surface Soil ◽  
Root Zone ◽  
Synthetic Data ◽  
Surface Soil Moisture ◽  
Data Set ◽  
Water Index ◽  
In Situ Observations

Abstract. A long term data acquisition effort of profile soil moisture is under way in southwestern France at 13 automated weather stations. This ground network was developed in order to validate remote sensing and model soil moisture estimates. In this paper, both those in situ observations and a synthetic data set covering continental France are used to test a simple method to retrieve root zone soil moisture from a time series of surface soil moisture information. A recursive exponential filter equation using a time constant, T, is used to compute a soil water index. The Nash and Sutcliff coefficient is used as a criterion to optimise the T parameter for each ground station and for each model pixel of the synthetic data set. In general, the soil water indices derived from the surface soil moisture observations and simulations agree well with the reference root-zone soil moisture. Overall, the results show the potential of the exponential filter equation and of its recursive formulation to derive a soil water index from surface soil moisture estimates. This paper further investigates the correlation of the time scale parameter T with soil properties and climate conditions. While no significant relationship could be determined between T and the main soil properties (clay and sand fractions, bulk density and organic matter content), the modelled spatial variability and the observed inter-annual variability of T suggest that a weak climate effect may exist.

Field scale spatiotemporal analysis of surface soil moisture for evaluating point-scale in situ networks

Geoderma ◽  
2012 ◽  
Vol 170 ◽  
pp. 195-205 ◽  
Author(s):  
Gary C. Heathman ◽  
Michael H. Cosh ◽  
Eunjin Han ◽  
Thomas J. Jackson ◽  
Lynn McKee ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Surface Soil ◽  
Spatiotemporal Analysis ◽  
Surface Soil Moisture ◽  
Field Scale ◽  
Point Scale

scholarly journals Evaluation of the AMSR2 L2 soil moisture product of JAXA on the Mongolian Plateau over seven years (2012–2018)

2019 ◽  
Vol 1 (11) ◽  
Author(s):  
Ichirow Kaihotsu ◽  
Jun Asanuma ◽  
Kentaro Aida ◽  
Dambaravjaa Oyunbaatar
Keyword(s):  
Soil Moisture ◽  
Vegetation Index ◽  
Normalized Difference Vegetation Index ◽  
Surface Soil ◽  
Surface Soil Moisture ◽  
Mongolian Plateau ◽  
Moisture Measurement ◽  
Rainfall Condition ◽  
Soil Moisture Measurement

Abstract This study evaluated the Advanced Microwave Scanning Radiometer 2 (AMSR2) L2 soil moisture product (ver. 3) using in situ hydrological observational data, acquired over 7 years (2012–2018), from a 50 × 50 km flat area of the Mongolian Plateau covered with bare soil, pasture and shrubs. Although AMSR2 slightly underestimated soil moisture content at 3-cm depth, satisfactory timing was observed in both the response patterns and the in situ soil moisture data, and the differences between these factors were not large. In terms of the relationship between AMSR2 soil moisture from descending orbits and in situ measured soil moisture at 3-cm depth, the values of the RMSE (m3/m3) and the bias (m3/m3) varied from 0.028 to 0.063 and from 0.011 to − 0.001 m3/m3, respectively. The values of the RMSE and bias depended on rainfall condition. The mean value of the RMSE for the 7-year period was 0.042 m3/m3, i.e., lower than the target accuracy 0.050 m3/m3. The validation results for descending orbits were found slightly better than for ascending orbits. Comparison of the Soil Moisture and Ocean Salinity (SMOS) soil moisture product with the AMSR2 L2 soil moisture product showed that AMSR2 could observe surface soil moisture with nearly same accuracy and stability. However, the bias of the AMSR2 soil moisture measurement was slightly negative and poorer than that of SMOS with deeper soil moisture measurement. It means that AMSR2 cannot effectively measure soil moisture at 3-cm depth. In situ soil temperature at 3-cm depth and surface vegetation (normalized difference vegetation index) did not influence the underestimation of AMSR2 soil moisture measurements. These results suggest that a possible cause of the underestimation of AMSR2 soil moisture measurements is the difference between the depth of the AMSR2 observations and in situ soil moisture measurements. Overall, this study proved the AMSR2 L2 soil moisture product has been useful for monitoring daily surface soil moisture over large grassland areas and it clearly demonstrated the high-performance capability of AMSR2 since 2012.

scholarly journals An Evaluation of the EnKF vs. EnOI and the Assimilation of SMAP, SMOS and ESA CCI Soil Moisture Data over the Contiguous US

2019 ◽  
Vol 11 (5) ◽  
pp. 478 ◽  
Author(s):  
Jostein Blyverket ◽  
Paul Hamer ◽  
Laurent Bertino ◽  
Clément Albergel ◽  
David Fairbairn ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Surface Soil ◽  
Open Loop ◽  
Surface Zone ◽  
Surface Soil Moisture ◽  
Atmospheric Forcing ◽  
Significance Level ◽  
Soil Moisture Data ◽  
In Situ Observations

A number of studies have shown that assimilation of satellite derived soil moisture using the ensemble Kalman Filter (EnKF) can improve soil moisture estimates, particularly for the surface zone. However, the EnKF is computationally expensive since an ensemble of model integrations have to be propagated forward in time. Here, assimilating satellite soil moisture data from the Soil Moisture Active Passive (SMAP) mission, we compare the EnKF with the computationally cheaper ensemble Optimal Interpolation (EnOI) method over the contiguous United States (CONUS). The background error–covariance in the EnOI is sampled in two ways: (i) by using the stochastic spread from an ensemble open-loop run, and (ii) sampling from the model spinup climatology. Our results indicate that the EnKF is only marginally superior to one version of the EnOI. Furthermore, the assimilation of SMAP data using the EnKF and EnOI is found to improve the surface zone correlation with in situ observations at a 95 % significance level. The EnKF assimilation of SMAP data is also found to improve root-zone correlation with independent in situ data at the same significance level; however this improvement is dependent on which in situ network we are validating against. We evaluate how the quality of the atmospheric forcing affects the analysis results by prescribing the land surface data assimilation system with either observation corrected or model derived precipitation. Surface zone correlation skill increases for the analysis using both the corrected and model derived precipitation, but only the latter shows an improvement at the 95 % significance level. The study also suggests that assimilation of satellite derived surface soil moisture using the EnOI can correct random errors in the atmospheric forcing and give an analysed surface soil moisture close to that of an open-loop run using observation derived precipitation. Importantly, this shows that estimates of soil moisture could be improved using a combination of assimilating SMAP using the computationally cheap EnOI while using model derived precipitation as forcing. Finally, we assimilate three different Level-2 satellite derived soil moisture products from the European Space Agency Climate Change Initiative (ESA CCI), SMAP and SMOS (Soil Moisture and Ocean Salinity) using the EnOI, and then compare the relative performance of the three resulting analyses against in situ soil moisture observations. In this comparison, we find that all three analyses offer improvements over an open-loop run when comparing to in situ observations. The assimilation of SMAP data is found to perform marginally better than the assimilation of SMOS data, while assimilation of the ESA CCI data shows the smallest improvement of the three analysis products.

Sign in / Sign up

Export Citation Format

Share Document