scholarly journals Satellite soil moisture data assimilation for improved operational continental water balance prediction

2021 ◽  
Vol 25 (8) ◽  
pp. 4567-4584
Author(s):  
Siyuan Tian ◽  
Luigi J. Renzullo ◽  
Robert C. Pipunic ◽  
Julien Lerat ◽  
Wendy Sharples ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Water Balance ◽  
Surface Soil ◽  
Root Zone ◽  
In Situ Observation ◽  
Surface Soil Moisture ◽  
Time Step ◽  
Australian Water

Abstract. A simple and effective two-step data assimilation framework was developed to improve soil moisture representation in an operational large-scale water balance model. The first step is a Kalman-filter-type sequential state updating process that exploits temporal covariance statistics between modelled and satellite-derived soil moisture to produce analysed estimates. The second step is to use analysed surface moisture estimates to impart mass conservation constraints (mass redistribution) on related states and fluxes of the model using tangent linear modelling theory in a post-analysis adjustment after the state updating at each time step. In this study, we assimilate satellite soil moisture retrievals from both Soil Moisture Active Passive (SMAP) and Soil Moisture and Ocean Salinity (SMOS) missions simultaneously into the Australian Water Resources Assessment Landscape model (AWRA-L) using the proposed framework and evaluate its impact on the model's accuracy against in situ observations across water balance components. We show that the correlation between simulated surface soil moisture and in situ observation increases from 0.54 (open loop) to 0.77 (data assimilation). Furthermore, indirect verification of root-zone soil moisture using remotely sensed Enhanced Vegetation Index (EVI) time series across cropland areas results in significant improvements from 0.52 to 0.64 in correlation. The improvements gained from data assimilation can persist for more than 1 week in surface soil moisture estimates and 1 month in root-zone soil moisture estimates, thus demonstrating the efficacy of this data assimilation framework.

scholarly journals Satellite soil moisture data assimilation for improved operational continental water balance prediction

2020 ◽  
Author(s):  
Siyuan Tian ◽  
Luigi J. Renzullo ◽  
Robert C. Pipunic ◽  
Julien Lerat ◽  
Wendy Sharples ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Water Balance ◽  
Surface Soil ◽  
Root Zone ◽  
In Situ Observation ◽  
Surface Soil Moisture ◽  
Time Step ◽  
Australian Water

Abstract. A simple and effective two-step data assimilation framework was developed to improve soil moisture representation in an operational large-scale water balance model. The first step is the sequential state updating process that exploits temporal covariance statistics between modelled and satellite-derived soil moisture to produce analysed estimates. The second step is to use analysed surface moisture estimates to impart mass conservation constraints (mass redistribution) on related states and fluxes of the model in a post-analysis adjustment after the state updating at each time step. In this study, we apply the data assimilation framework to the Australian Water Resources Assessment Landscape model (AWRA-L) and evaluate its impact on the model's accuracy against in-situ observations across water balance components. We show that the correlation between simulated surface soil moisture and in-situ observation increases from 0.54 (open-loop) to 0.77 (data assimilation). Furthermore, indirect verification of root-zone soil moisture using remotely sensed vegetation time series across cropland areas results in significant improvements of 0.11 correlation units. The improvements gained from data assimilation can persist for more than one week in surface soil moisture estimates and one month in root-zone soil moisture estimates, thus demonstrating the efficacy of this data assimilation framework.

scholarly journals The impact of near-surface soil moisture assimilation at subseasonal, seasonal, and inter-annual timescales

2015 ◽  
Vol 19 (12) ◽  
pp. 4831-4844 ◽  
Author(s):  
C. Draper ◽  
R. Reichle
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Surface Soil ◽  
Root Zone ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Near Surface ◽  
In Situ Observations ◽  
The Impact

Abstract. A 9 year record of Advanced Microwave Scanning Radiometer – Earth Observing System (AMSR-E) soil moisture retrievals are assimilated into the Catchment land surface model at four locations in the US. The assimilation is evaluated using the unbiased mean square error (ubMSE) relative to watershed-scale in situ observations, with the ubMSE separated into contributions from the subseasonal (SMshort), mean seasonal (SMseas), and inter-annual (SMlong) soil moisture dynamics. For near-surface soil moisture, the average ubMSE for Catchment without assimilation was (1.8 × 10−3 m3 m−3)2, of which 19 % was in SMlong, 26 % in SMseas, and 55 % in SMshort. The AMSR-E assimilation significantly reduced the total ubMSE at every site, with an average reduction of 33 %. Of this ubMSE reduction, 37 % occurred in SMlong, 24 % in SMseas, and 38 % in SMshort. For root-zone soil moisture, in situ observations were available at one site only, and the near-surface and root-zone results were very similar at this site. These results suggest that, in addition to the well-reported improvements in SMshort, assimilating a sufficiently long soil moisture data record can also improve the model representation of important long-term events, such as droughts. The improved agreement between the modeled and in situ SMseas is harder to interpret, given that mean seasonal cycle errors are systematic, and systematic errors are not typically targeted by (bias-blind) data assimilation. Finally, the use of 1-year subsets of the AMSR-E and Catchment soil moisture for estimating the observation-bias correction (rescaling) parameters is investigated. It is concluded that when only 1 year of data are available, the associated uncertainty in the rescaling parameters should not greatly reduce the average benefit gained from data assimilation, although locally and in extreme years there is a risk of increased errors.

scholarly journals The impact of near-surface soil moisture assimilation at subseasonal, seasonal, and inter-annual time scales

2015 ◽  
Vol 12 (8) ◽  
pp. 7971-8004 ◽  
Author(s):  
C. Draper ◽  
R. Reichle
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Surface Soil ◽  
Root Zone ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Near Surface ◽  
In Situ Observations ◽  
One Year

Abstract. Nine years of Advanced Microwave Scanning Radiometer – Earth Observing System (AMSR-E) soil moisture retrievals are assimilated into the Catchment land surface model at four locations in the US. The assimilation is evaluated using the unbiased Mean Square Error (ubMSE) relative to watershed-scale in situ observations, with the ubMSE separated into contributions from the subseasonal (SMshort), mean seasonal (SMseas) and inter-annual (SMlong) soil moisture dynamics. For near-surface soil moisture, the average ubMSE for Catchment without assimilation was (1.8 × 10−3 m3 m−3)2, of which 19 % was in SMlong, 26 % in SMseas, and 55 % in SMshort. The AMSR-E assimilation significantly reduced the total ubMSE at every site, with an average reduction of 33 %. Of this ubMSE reduction, 37 % occurred in SMlong, 24 % in SMseas, and 38 % in SMshort. For root-zone soil moisture, in situ observations were available at one site only, and the near-surface and root-zone results were very similar at this site. These results suggest that, in addition to the well-reported improvements in SMshort, assimilating a sufficiently long soil moisture data record can also improve the model representation of important long term events, such as droughts. The improved agreement between the modeled and in situ SMseas is harder to interpret, given that mean seasonal cycle errors are systematic, and systematic errors are not typically targeted by (bias-blind) data assimilation. Finally, the use of one year subsets of the AMSR-E and Catchment soil moisture for estimating the observation-bias correction (rescaling) parameters is investigated. It is concluded that when only one year of data is available, the associated uncertainty in the rescaling parameters should not greatly reduce the average benefit gained from data assimilation, but locally and in extreme years there is a risk of increased errors.

scholarly journals From near-surface to root-zone soil moisture using an exponential filter: an assessment of the method based on in-situ observations and model simulations

2008 ◽  
Vol 12 (6) ◽  
pp. 1323-1337 ◽  
Author(s):  
C. Albergel ◽  
C. Rüdiger ◽  
T. Pellarin ◽  
J.-C. Calvet ◽  
N. Fritz ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Soil Water ◽  
Surface Soil ◽  
Root Zone ◽  
Synthetic Data ◽  
Surface Soil Moisture ◽  
Data Set ◽  
Water Index ◽  
In Situ Observations

Abstract. A long term data acquisition effort of profile soil moisture is under way in southwestern France at 13 automated weather stations. This ground network was developed in order to validate remote sensing and model soil moisture estimates. In this paper, both those in situ observations and a synthetic data set covering continental France are used to test a simple method to retrieve root zone soil moisture from a time series of surface soil moisture information. A recursive exponential filter equation using a time constant, T, is used to compute a soil water index. The Nash and Sutcliff coefficient is used as a criterion to optimise the T parameter for each ground station and for each model pixel of the synthetic data set. In general, the soil water indices derived from the surface soil moisture observations and simulations agree well with the reference root-zone soil moisture. Overall, the results show the potential of the exponential filter equation and of its recursive formulation to derive a soil water index from surface soil moisture estimates. This paper further investigates the correlation of the time scale parameter T with soil properties and climate conditions. While no significant relationship could be determined between T and the main soil properties (clay and sand fractions, bulk density and organic matter content), the modelled spatial variability and the observed inter-annual variability of T suggest that a weak climate effect may exist.

scholarly journals Accuracy and Transferability of Artificial Neural Networks in Predicting in Situ Root-Zone Soil Moisture for Various Regions across the Globe

Water ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 3109
Author(s):  
Roïya Souissi ◽  
Ahmad Al Bitar ◽  
Mehrez Zribi
Keyword(s):  
Neural Network ◽  
Soil Moisture ◽  
Soil Texture ◽  
Surface Soil ◽  
Root Zone ◽  
Data Filtering ◽  
Surface Soil Moisture ◽  
The Mean ◽  
Artificial Neural

This paper explores the accuracy in using an artificial neural network (ANN) to estimate root-zone soil moisture (RZSM) at multiple worldwide locations using only in situ surface soil moisture (SSM) as a training dataset. The paper also addresses the transferability of the trained ANN across climatic and soil texture conditions. Data from the International Soil Moisture Network (ISMN) were collected for several networks with variable soil texture and climate classes. Several scaling, feature extraction, and training approaches were tested. An artificial neural network employing rolling averages (ANNRAV) of SSM over 10, 30, and 90 days was developed. The results show that applying a standard scaling (SSCA) to the ANN input features improves the correlation, Nash–Sutcliffe efficiency (NSE), and root mean square error (RMSE) for 52%, 91%, and 87%, respectively, of the tested stations, compared to MinMax scaling (MMSCA). Different training sets are suggested, namely, training on data from all networks, data from one network, or data of all networks excluding one. Based on these trainings, new transferability (TranI) and contribution (ContI) indices are defined. The results show that one network cannot provide the best prediction accuracy if used alone to train the ANN. They also show that the removal of the less contributing networks enhances performance. For example, elimination of the densest network (SCAN) from the training enhances the mean correlation by 20.5% and the mean NSE by 42.5%. This motivates the implementation of a data filtering technique based on the ANN’s performance. A median, max, and min correlation of 0.77, 0.96, and 0.65, respectively, are obtained by the model after data filtering. The performances are also analyzed with respect to the covered climatic regions and soil texture, providing insights into the robustness and limitations of the approach, namely, the need for complementary information in highly evaporative regions. In fact, the ANN using only SSM to predict RZSM has low performance when decoupling between the surface and root zones is observed. The application of ANN to obtain spatialized RZSM will require integrating remote sensing-based surface soil moisture in the future.

scholarly journals From Near-Surface to Root-Zone Soil Moisture Using Different Assimilation Techniques

2007 ◽  
Vol 8 (2) ◽  
pp. 194-206 ◽  
Author(s):  
Joaquín Muñoz Sabater ◽  
Lionel Jarlan ◽  
Jean-Christophe Calvet ◽  
François Bouyssel ◽  
Patricia De Rosnay
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Surface Soil ◽  
Diffusion Processes ◽  
Root Zone ◽  
Computational Cost ◽  
Climatic Conditions ◽  
Surface Soil Moisture ◽  
Near Surface

Abstract Root-zone soil moisture constitutes an important variable for hydrological and weather forecast models. Microwave radiometers like the L-band instrument on board the European Space Agency’s (ESA) future Soil Moisture and Ocean Salinity (SMOS) mission are being designed to provide estimates of near-surface soil moisture (0–5 cm). This quantity is physically related to root-zone soil moisture through diffusion processes, and both surface and root-zone soil layers are commonly simulated by land surface models (LSMs). Observed time series of surface soil moisture may be used to analyze the root-zone soil moisture using data assimilation systems. In this paper, various assimilation techniques derived from Kalman filters (KFs) and variational methods (VAR) are implemented and tested. The objective is to correct the modeled root-zone soil moisture deficiencies of the newest version of the Interaction between Soil, Biosphere, and Atmosphere scheme (ISBA) LSM, using the observations of the surface soil moisture of the Surface Monitoring of the Soil Reservoir Experiment (SMOSREX) over a 4-yr period (2001–04). This time period includes contrasting climatic conditions. Among the different algorithms, the ensemble Kalman filter (EnKF) and a simplified one-dimensional variational data assimilation (1DVAR) show the best performances. The lower computational cost of the 1DVAR is an advantage for operational root-zone soil moisture analysis based on remotely sensed surface soil moisture observations at a global scale.

A performance assessment method for SAR satellite-derived surface soil moisture data using a soil-water balance model, meteorological observations, and soil pedotransfer functions.

2020 ◽  
Author(s):  
John Beale ◽  
Toby Waine ◽  
Ronald Corstanje ◽  
Jonathan Evans
Keyword(s):  
Regression Analysis ◽  
Soil Moisture ◽  
Water Balance ◽  
Surface Soil ◽  
Cosmic Ray ◽  
Water Balance Model ◽  
Balance Model ◽  
Model Parameters ◽  
Surface Soil Moisture

<p>The validation of surface soil moisture products derived from SAR satellites data is challenged by the difficulty of reliably measuring in-situ soil moisture at shallow soil depths of a few centimetres, consistent with the penetration depth of the microwave beam. Our analysis shows that the apparent accuracy of the remote sensing products is underestimated by comparison with inconsistent probe data or measurements at greater soil depths. Our alternative approach uses in-situ meteorological measurements to determine rainfall and potential evapotranspiration, to be used with soil hydrological properties as inputs to a water balance model to estimate surface soil moisture independently of the satellite data. In-situ soil moisture measurements are used to validate and refine the model parameters. The choice of appropriate soil hydrological parameters with which to convert remotely sensed surface soil moisture indices to volumetric moisture content is shown to have a significant impact on the bias and offset in the regression analysis. To illustrate this, Copernicus SSM data is analysed by this method for a number of COSMOS-UK soil moisture monitoring sites, showing a significant improvement in the coefficient of determination, bias and offset over regression analysis using in-situ measurements from soil moisture probes or the cosmic ray soil moisture sensor itself. This will benefit users of such products in agriculture, for example, in determining actual soil moisture deficit.</p>

scholarly journals Thermal Inertia Approach Using a Heat Budget Model to Estimate the Spatial Distribution of Surface Soil Moisture over a Semiarid Grassland in Central Mongolia

2018 ◽  
Vol 19 (1) ◽  
pp. 245-265 ◽  
Author(s):  
Dai Matsushima ◽  
Jun Asanuma ◽  
Ichirow Kaihotsu
Keyword(s):  
Time Series ◽  
Soil Moisture ◽  
Surface Soil ◽  
Heat Budget ◽  
Atmospheric Stability ◽  
Thermal Inertia ◽  
In Situ Observation ◽  
Surface Soil Moisture ◽  
Budget Model

Abstract Thermal inertia is a physical parameter that evaluates soil thermal properties with an emphasis on the stability of the temperature when the soil is affected by heating/cooling. Thermal inertia can be retrieved from a heat budget formulation as a parameter when the time series of Earth surface temperature and forcing variables, such as insolation and air temperature, are given. In this study, a two-layer, linearized heat budget model was employed for the retrieval of thermal inertia over a grassland in a semiarid region. Application of different formulations to the aerodynamic conductance with respect to atmospheric stability significantly improved the accuracy of the thermal inertia retrieval. The retrieved values of thermal inertia were well correlated with in situ surface soil moisture at multiple ground stations. The daily time series of thermal inertia–derived soil moisture qualitatively agreed well with in situ soil moisture after antecedent rainfalls, which was found after fitting the time series to an exponentially decaying function. On the contrary, AMSR2 soil moisture mostly did not agree with in situ soil moisture. The results of the estimation showed high accuracy: the root-mean-square error was 0.038 m3 m−3 compared to the in situ data and was applied to an area of 2° × 2° in which the in situ observation locations were included. The spatiotemporal distribution of surface soil moisture was mapped at a 0.03° × 0.03° spatial resolution in the study area as 10- or 11-day averages over a vegetation growth period of 2012.

scholarly journals Cross-evaluation of modelled and remotely sensed surface soil moisture with in situ data in southwestern France

2010 ◽  
Vol 14 (11) ◽  
pp. 2177-2191 ◽  
Author(s):  
C. Albergel ◽  
J.-C. Calvet ◽  
P. de Rosnay ◽  
G. Balsamo ◽  
W. Wagner ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Surface Soil ◽  
Root Zone ◽  
Weather Prediction ◽  
Remotely Sensed ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Moisture Profile

Abstract. The SMOSMANIA soil moisture network in Southwestern France is used to evaluate modelled and remotely sensed soil moisture products. The surface soil moisture (SSM) measured in situ at 5 cm permits to evaluate SSM from the SIM operational hydrometeorological model of Météo-France and to perform a cross-evaluation of the normalised SSM estimates derived from coarse-resolution (25 km) active microwave observations from the ASCAT scatterometer instrument (C-band, onboard METOP), issued by EUMETSAT and resampled to the Discrete Global Grid (DGG, 12.5 km gridspacing) by TU-Wien (Vienna University of Technology) over a two year period (2007–2008). A downscaled ASCAT product at one kilometre scale is evaluated as well, together with operational soil moisture products of two meteorological services, namely the ALADIN numerical weather prediction model (NWP) and the Integrated Forecasting System (IFS) analysis of Météo-France and ECMWF, respectively. In addition to the operational SSM analysis of ECMWF, a second analysis using a simplified extended Kalman filter and assimilating the ASCAT SSM estimates is tested. The ECMWF SSM estimates correlate better with the in situ observations than the Météo-France products. This may be due to the higher ability of the multi-layer land surface model used at ECMWF to represent the soil moisture profile. However, the SSM derived from SIM corresponds to a thin soil surface layer and presents good correlations with ASCAT SSM estimates for the very first centimetres of soil. At ECMWF, the use of a new data assimilation technique, which is able to use the ASCAT SSM, improves the SSM and the root-zone soil moisture analyses.

scholarly journals The Indian COSMOS Network (ICON): Validating L-Band Remote Sensing and Modelled Soil Moisture Data Products

2021 ◽  
Vol 13 (3) ◽  
pp. 537
Author(s):  
Deepti B Upadhyaya ◽  
Jonathan Evans ◽  
Sekhar Muddu ◽  
Sat Kumar Tomer ◽  
Ahmad Al Bitar ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Water Resource Management ◽  
Surface Soil ◽  
Root Zone ◽  
Cosmic Ray ◽  
Surface Soil Moisture ◽  
Data Set ◽  
Scale Difference

Availability of global satellite based Soil Moisture (SM) data has promoted the emergence of many applications in climate studies, agricultural water resource management and hydrology. In this context, validation of the global data set is of substance. Remote sensing measurements which are representative of an area covering 100 m2 to tens of km2 rarely match with in situ SM measurements at point scale due to scale difference. In this paper we present the new Indian Cosmic Ray Network (ICON) and compare it’s data with remotely sensed SM at different depths. ICON is the first network in India of the kind. It is operational since 2016 and consist of seven sites equipped with the COSMOS instrument. This instrument is based on the Cosmic Ray Neutron Probe (CRNP) technique which uses non-invasive neutron counts as a measure of soil moisture. It provides in situ measurements over an area with a radius of 150–250 m. This intermediate scale soil moisture is of interest for the validation of satellite SM. We compare the COSMOS derived soil moisture to surface soil moisture (SSM) and root zone soil moisture (RZSM) derived from SMOS, SMAP and GLDAS_Noah. The comparison with surface soil moisture products yield that the SMAP_L4_SSM showed best performance over all the sites with correlation (R) values ranging from 0.76 to 0.90. RZSM on the other hand from all products showed lesser performances. RZSM for GLDAS and SMAP_L4 products show that the results are better for the top layer R = 0.75 to 0.89 and 0.75 to 0.90 respectively than the deeper layers R = 0.26 to 0.92 and 0.6 to 0.8 respectively in all sites in India. The ICON network will be a useful tool for the calibration and validation activities for future SM missions like the NASA-ISRO Synthetic Aperture Radar (NISAR).

Sign in / Sign up

Export Citation Format

Share Document