scholarly journals Objective analysis of SMOS and SMAP Sea Surface Salinity to reduce large scale and time dependent biases from low to high latitudes

2020 ◽  
Author(s):  
Nicolas Kolodziejczyk ◽  
Mathieu Hamon ◽  
Jacqueline Boutin ◽  
Jean-Luc Vergely ◽  
Gilles Reverdin ◽  
...  
Keyword(s):  
Soil Moisture ◽  
High Latitude ◽  
Large Scale ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
The Arctic ◽  
Surface Salinity ◽  
Radiometric Measurements ◽  
L Band

AbstractTen years of L-Band radiometric measurements have proven the capability of satellite Sea Surface Salinity (SSS) to resolve large scale to mesoscale SSS features in tropical to subtropical ocean. In mid to high latitude, L-Band measurements still suffer from large scale and time systematic errors. Here, a simple method is proposed to mitigate the large scale and seasonal varying biases. First, an Optimal Interpolation (OI) using a large correlation scale (~500 km) is used to map independently Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) Level 3 data. The mapping is compared to the equivalent mapping of in situ observations to estimate the large scale and seasonal biases. A second mapping is performed on adjusted SSS at the scale of SMOS/SMAP spatial resolution (~45 km). This procedure merges both products, and increases the signal to noise ratio of the absolute SSS estimates, reducing the RMSD of in situ-satellite products by about 26-32% from mid to high latitude, respectively, in comparison to the existing SMOS and SMAP L3 products. However, in the Arctic Ocean, some issues on satellite retrieved SSS related to e.g. radio frequency interferences, land-sea contamination, ice-sea contamination remain challenging to reduce given the low sensitivity of L-Band radiometric measurements to SSS in cold water. Using the thermodynamic equation of state (TEOS-10), the resulting L4 SSS satellite product is combined with satellite-microwave SST products to estimate sea surface density, spiciness, haline contraction and thermal expansion coefficients. For the first time, we illustrate how useful are these satellite derived parameters to fully characterize the surface ocean water masses at large mesoscale.

scholarly journals Intercomparison of Salinity Products in the Beaufort Gyre and Arctic Ocean

2021 ◽  
Vol 14 (1) ◽  
pp. 71
Author(s):  
Sarah B. Hall ◽  
Bulusu Subrahmanyam ◽  
James H. Morison
Keyword(s):  
Soil Moisture ◽  
Arctic Ocean ◽  
Satellite Observations ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
The Arctic ◽  
Surface Salinity ◽  
Beaufort Gyre ◽  
The Arctic Ocean

Salinity is the primary determinant of the Arctic Ocean’s density structure. Freshwater accumulation and distribution in the Arctic Ocean have varied significantly in recent decades and certainly in the Beaufort Gyre (BG). In this study, we analyze salinity variations in the BG region between 2012 and 2017. We use in situ salinity observations from the Seasonal Ice Zone Reconnaissance Surveys (SIZRS), CTD casts from the Beaufort Gyre Exploration Project (BGP), and the EN4 data to validate and compare with satellite observations from Soil Moisture Active Passive (SMAP), Soil Moisture and Ocean Salinity (SMOS), and Aquarius Optimally Interpolated Sea Surface Salinity (OISSS), and Arctic Ocean models: ECCO, MIZMAS, HYCOM, ORAS5, and GLORYS12. Overall, satellite observations are restricted to ice-free regions in the BG area, and models tend to overestimate sea surface salinity (SSS). Freshwater Content (FWC), an important component of the BG, is computed for EN4 and most models. ORAS5 provides the strongest positive SSS correlation coefficient (0.612) and lowest bias to in situ observations compared to the other products. ORAS5 subsurface salinity and FWC compare well with the EN4 data. Discrepancies between models and SIZRS data are highest in GLORYS12 and ECCO. These comparisons identify dissimilarities between salinity products and extend challenges to observations applicable to other areas of the Arctic Ocean.

Towards an improved temporal stability of CCI+SSS time series

2021 ◽  
Author(s):  
Xavier Perrot ◽  
Jacqueline Boutin ◽  
Jean Luc Vergely ◽  
Frédéric Rouffi ◽  
Adrien Martin ◽  
...  
Keyword(s):  
Climate Change ◽  
Time Series ◽  
Dielectric Constant ◽  
Soil Moisture ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
L Band ◽  
Band Radiometer

<p>This study is performed in the frame of the European Space Agency (ESA) Climate Change Initiative (CCI+) for Sea Surface Salinity (SSS), which aims at generating global SSS fields from all available satellite L-band radiometer measurements over the longest possible period with a great stability. By combining SSS from the Soil Moisture and Ocean Salinity, SMOS, Aquarius and the Soil Moisture Active Passive, SMAP missions, CCI+SSS fields (Boutin et al. 2020) are the only one to provide a 10 year time series of satellite salinity with such quality: global rms difference of weekly 25x25km<span>2 </span>CCI+SSS with respect to in situ Argo SSS of 0.17 pss, correlation coefficient of 0.97 (see https://pimep.ifremer.fr/diffusion/analyses/mdb-database/GO/cci-l4-esa-merged-oi-v2.31-7dr/argo/report/pimep-mdb-report_GO_cci-l4-esa-merged-oi-v2.31-7dr_argo_20201215.pdf). Nevertheless, we found that some systematic biases remained. In this presentation, we will show how they will be reduced in the next CCI+SSS version.</p><p>The key satellite mission ensuring the longest time period, since 2010, at global scale, is SMOS. We implemented a re-processing of the whole SMOS dataset by changing some key points. Firstly we replace the Klein and Swift (1977) dielectric constant parametrization by the new Boutin et al. (2020) one. Secondly we change the reference dataset used to perform a vicarious calibration over the south east Pacific Ocean (the so-called Ocean Target Transformation), by using Argo interpolated fields (ISAS, Gaillard et al. 2016) contemporaneous to the satellite measurements instead of the World Ocean Atlas climatology. And thirdly the auxiliary data (wind, SST, atmospheric parameters) used as priors in the retrieval scheme, which come in the original SMOS processing from the ECMWF forecast model were replaced by ERA5 reanalysis.</p><p>Our results are showing a quantitative improvement in the stability of the SMOS CCI+SSS with respect to in situ measurements for all the period as well as a decrease of the spread of the difference between SMOS and in situ salinity measurements.</p><p>Bibliography:</p><p>J. Boutin et al. (2020), Correcting Sea Surface Temperature Spurious Effects in Salinity Retrieved From Spaceborne L-Band Radiometer Measurements, IEEE Transactions on Geoscience and Remote Sensing, doi: 10.1109/TGRS.2020.3030488.</p><p>F. Gaillard et al. (2016), In Situ–Based Reanalysis of the Global Ocean Temperature and Salinity with ISAS: Variability of the Heat Content and Steric Height, Journal of Climate, vol. 29, no. 4, pp. 1305-1323, doi: 10.1175/JCLI-D-15-0028.1.</p><p>L. Klein and C. Swift (1977), An improved model for the dielectric constant of sea water at microwave frequencies, IEEE Transactions on Antennas and Propagation, vol. 25, no. 1, pp. <span>104-111, </span>doi: 10.1109/JOE.1977.1145319.</p><p>Data reference:</p><p>J. Boutin et al. (2020): ESA Sea Surface Salinity Climate Change Initiative (Sea_Surface_Salinity_cci): Weekly sea surface salinity product, v2.31, for 2010 to 2019. Centre for Environmental Data Analysis. https://catalogue.ceda.ac.uk/uuid/eacb7580e1b54afeaabb0fd2b0a53828</p>

scholarly journals New insights into SMOS Sea Surface Salinity retrievals in the Arctic Ocean.

2020 ◽  
Author(s):  
Alexandre Supply ◽  
Jacqueline Boutin ◽  
Jean-Luc Vergely ◽  
Nicolas Kolodziejczyk ◽  
Gilles Reverdin ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Arctic Ocean ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
The Arctic ◽  
Surface Salinity ◽  
Near Surface ◽  
The Arctic Ocean ◽  
L Band

<p>Since 2010, the Soil Moisture and Ocean Salinity (SMOS) satellite mission monitors the earth emission at L-Band, providing the longest time series of Sea Surface Salinity (SSS) from space over the global ocean. However, retrieving SSS at high latitudes with a reasonable accuracy remains challenging, in particular due to the low sensitivity of L-Band radiometric measurements to SSS in cold waters and to the contamination of SMOS measurements by the vicinity of continents and sea ice as well as the presence of Radio Frequency Interferences. In this paper, we assess the quality of weekly SSS fields derived from swath-ordered instantaneous SMOS SSS (so called Level 2) distributed by the European Space Agency. These products are filtered according to new criteria. We use the pseudo-dielectric constant retrieved from SMOS brightness temperatures to filter SSS pixels polluted by sea ice. We identify that the dielectric constant model and the sea surface temperature auxiliary parameter used as prior information in the SMOS SSS retrieval are significant sources of uncertainty. We develop a novel correction methodology accordingly.</p><p>SSS Standard deviation of differences (STDD) between weekly SMOS SSS and in-situ near surface salinity significantly decrease after applying the SSS correction, from 1.46 pss to 1.26 pss. The correlation between new SMOS SSS and in-situ near surface salinity reaches 0.94. SMOS estimates better capture SSS variability in the Arctic Ocean in comparison to TOPAZ reanalysis (STDD = 1.86 pss), particularly in river plumes fresher by about 10 pss than surrounding waters. Furthermore, comparisons with in-situ measurements ranging from 1 to 11 m depths identify huge vertical stratification in fresh regions. This emphasizes the need to consider in-situ salinity as close as possible to the sea surface when validating L-band radiometric SSS which are representative of the first top centimeter.</p>

scholarly journals Evaluation and Intercomparison of SMOS, Aquarius, and SMAP Sea Surface Salinity Products in the Arctic Ocean

2019 ◽  
Vol 11 (24) ◽  
pp. 3043 ◽  
Author(s):  
Séverine Fournier ◽  
Tong Lee ◽  
Wenqing Tang ◽  
Michael Steele ◽  
Estrella Olmedo
Keyword(s):  
Soil Moisture ◽  
Arctic Ocean ◽  
European Space Agency ◽  
In Situ Measurements ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
The Arctic ◽  
Surface Salinity ◽  
The Arctic Ocean

Salinity is a critical parameter in the Arctic Ocean, having potential implications for climate and weather. This study presents the first systematic analysis of 6 commonly used sea surface salinity (SSS) products from the National Aeronautics and Space Administration (NASA) Aquarius and Soil Moisture Active Passive (SMAP) satellites and the European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) mission, in terms of their consistency among one another and with in-situ data. Overall, the satellite SSS products provide a similar characterization of the time mean SSS large-scale patterns and are relatively consistent in depicting the regions with strong SSS temporal variability. When averaged over the Arctic Ocean, the SSS show an excellent consistency in describing the seasonal and interannual variations. Comparison of satellite SSS with in-situ salinity measurements along ship transects suggest that satellite SSS captures salinity gradients away from regions with significant sea-ice concentration. The root-mean square differences (RMSD) of satellite SSS with respect to in-situ measurements improves with increasing temperature, reflecting the limitation of L-band radiometric sensitivity to SSS in cold water. However, the satellite SSS biases with respect to the in-situ measurements do not show a consistent dependence on temperature. The results have significant implications for the calibration and validation of satellite SSS as well as for the modeling community and the design of future satellite missions.

Sea surface salinity reemergence in an updated North Atlantic in-situ salinity data set

2021 ◽  
pp. 1-49
Author(s):  
Claude Frankignoul ◽  
Elodie Kestenare ◽  
Gilles Reverdin
Keyword(s):  
Large Scale ◽  
Cold Season ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Data Set ◽  
Salinity Data ◽  
Deep Mixed Layer ◽  
Geostrophic Advection

AbstractMonthly sea surface salinity (SSS) fields are constructed from observations, using objective mapping on a 1°x1° grid in the Atlantic between 30°S and 50°N in the 1970-2016 period in an update of the data set of Reverdin et al. (2007). Data coverage is heterogeneous, with increased density in 2002 when Argo floats become available, high density along Voluntary Observing Ship lines, and low density south of 10°S. Using lag correlation, the seasonal reemergence of SSS anomalies is investigated between 20°N and 50°N in 5°x5° boxes during the 1993-2016 period, both locally and remotely following the displacements of the deep mixed-layer waters estimated from virtual float trajectories derived from the daily AVISO surface geostrophic currents. Although SSS data are noisy, local SSS reemergence is detected in about half of the boxes, notably in the northeast and southeast, while little reemergence is seen in the central and part of the eastern subtropical gyre. In the same period, sea surface temperature (SST) reemergence is found only slightly more frequently, reflecting the short data duration. However, taking geostrophic advection into account degrades the detection of remote SSS and even SST reemergence. When anomalies are averaged over broader areas, robust evidence of a second and third SSS reemergence peak is found in the northeastern and southeastern parts of the domain, indicating long cold-season persistence of large-scale SSS anomalies, while only a first SST reemergence is seen. An oceanic reanalysis is used to confirm that the correlation analysis indeed reflects the reemergence of subsurface salinity anomalies.

scholarly journals Copernicus Imaging Microwave Radiometer (CIMR) Benefits for the Copernicus Level 4 Sea-Surface Salinity Processing Chain

2019 ◽  
Vol 11 (15) ◽  
pp. 1818 ◽  
Author(s):  
Daniele Ciani ◽  
Rosalia Santoleri ◽  
Gian Luigi Liberti ◽  
Catherine Prigent ◽  
Craig Donlon ◽  
...  
Keyword(s):  
Soil Moisture ◽  
High Resolution ◽  
Microwave Radiometer ◽  
Ocean Surface ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Optimal Interpolation ◽  
Surface Salinity ◽  
Processing Chain

We present a study on the potential of the Copernicus Imaging Microwave Radiometer (CIMR) mission for the global monitoring of Sea-Surface Salinity (SSS) using Level-4 (gap-free) analysis processing. Space-based SSS are currently provided by the Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) satellites. However, there are no planned missions to guarantee continuity in the remote SSS measurements for the near future. The CIMR mission is in a preparatory phase with an expected launch in 2026. CIMR is focused on the provision of global coverage, high resolution sea-surface temperature (SST), SSS and sea-ice concentration observations. In this paper, we evaluate the mission impact within the Copernicus Marine Environment Monitoring Service (CMEMS) SSS processing chain. The CMEMS SSS operational products are based on a combination of in situ and satellite (SMOS) SSS and high-resolution SST information through a multivariate optimal interpolation. We demonstrate the potential of CIMR within the CMEMS SSS operational production after the SMOS era. For this purpose, we implemented an Observing System Simulation Experiment (OSSE) based on the CMEMS MERCATOR global operational model. The MERCATOR SSSs were used to generate synthetic in situ and CIMR SSS and, at the same time, they provided a reference gap-free SSS field. Using the optimal interpolation algorithm, we demonstrated that the combined use of in situ and CIMR observations improves the global SSS retrieval compared to a processing where only in situ observations are ingested. The improvements are observed in the 60% and 70% of the global ocean surface for the reconstruction of the SSS and of the SSS spatial gradients, respectively. Moreover, the study highlights the CIMR-based salinity patterns are more accurate both in the open ocean and in coastal areas. We conclude that CIMR can guarantee continuity for accurate monitoring of the ocean surface salinity from space.

Validation and correction of sea surface salinity retrieval from SMAP

2020 ◽  
Author(s):  
Sisi Qin
Keyword(s):  
Soil Moisture ◽  
In Situ Measurements ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
Tropical Regions ◽  
Ocean Salinity ◽  
Forecast Models ◽  
Level 3

<p>In this study, Sea Surface Salinity (SSS) Level 3 (L3) daily product derived from Soil Moisture Active Passive (SMAP) during the year 2016, was validated and compared with SSS daily products derived from Soil Moisture and Ocean Salinity (SMOS) and in-situ measurements. Generally, the Root Mean Square Error (RMSE) of the daily SSS products is larger along the coastal areas and at high latitudes and is smaller in the tropical regions and open oceans. Comparisons between the two types of daily satellite SSS product revealed that the RMSE was higher in the daily SMOS product than in the SMAP, whereas the bias of the daily SMOS was observed to be less than that of the SMAP when compared with Argo floats data. In addition, the latitude-dependent bias and RMSE of the SMAP SSS were found to be primarily influenced by the precipitation and the Sea Surface Temperature (SST).Then, aregression analysis method which has adopted the precipitation and SST data was used to correct the larger bias of the daily SMAP product. It was confirmed that the corrected daily SMAP product could be used for assimilation in high-resolution forecast models, due to the fact that it was demonstrated to be unbiased and much closer to the in-situ measurements than the original uncorrected SMAP product.</p>

scholarly journals Correcting sea surface temperature spurious effects in salinity retrieved from spaceborne L-band Radiometer measurements

2021 ◽  
Author(s):  
Jacqueline Boutin ◽  
Jean-Luc Vergely ◽  
Emmanuel Dinnat ◽  
Philippe Waldteufel ◽  
Francesco D'Amico ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Dielectric Constants ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
L Band ◽  
Band Radiometer

<p>We derived a new parametrisation for the dielectric constant of the ocean (Boutin et al. 2020). Earlier studies have pointed out systematic differences between Sea Surface Salinity retrieved from L-band radiometric measurements and measured in situ, that depend on Sea Surface Temperature (SST). We investigate how to cope with these differences given existing physically based radiative transfer models. In order to study differences coming from seawater dielectric constant parametrization, we consider the model of Somaraju and Trumpf (2006) (ST) which is built on sound physical bases and close to a single relaxation term Debye equation. While ST model uses fewer empirically adjusted parameters than other dielectric constant models currently used in salinity retrievals, ST dielectric constants are found close to those obtained using the Meissner and Wentz (2012) (MW) model. The ST parametrization is then slightly modified in order to achieve a better fit with seawater dielectric constant inferred from SMOS data. Upgraded dielectric constant model is intermediate between KS and MW models. Systematic differences between SMOS and in situ salinity are reduced to less than +/-0.2 above 0°C and within +/-0.05 between 7 and 28°C. Aquarius salinity becomes closer to in situ salinity, and within +/-0.1. The order of magnitude of remaining differences is very similar to the one achieved with the Aquarius version 5 empirical adjustment of wind model SST dependency. The upgraded parametrization is recommended for use in processing the SMOS data. </p><p>The rationale for this new parametrisation, results obtained with this new parametrisation in recent SMOS reprocessings and comparisons with other parametrisations will be discussed.</p><p>Reference:</p><p>Boutin, J.,et al. (2020), Correcting Sea Surface Temperature Spurious Effects in Salinity Retrieved From Spaceborne L-Band Radiometer Measurements, IEEE TGRSS, doi:10.1109/tgrs.2020.3030488.</p>

scholarly journals Seven Years of SMOS Sea Surface Salinity at High Latitudes: Variability in Arctic and Sub-Arctic Regions

2018 ◽  
Vol 10 (11) ◽  
pp. 1772 ◽  
Author(s):  
Estrella Olmedo ◽  
Carolina Gabarró ◽  
Verónica González-Gambau ◽  
Justino Martínez ◽  
Joaquim Ballabrera-Poy ◽  
...  
Keyword(s):  
Dynamic Range ◽  
Remotely Sensed ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
The Arctic ◽  
Surface Salinity ◽  
In Situ Data ◽  
Arctic Regions ◽  
The Difference

This paper aims to present and assess the quality of seven years (2011–2017) of 25 km nine-day Soil Moisture and Ocean Salinity (SMOS) Sea Surface Salinity (SSS) objectively analyzed maps in the Arctic and sub-Arctic oceans ( 50 ∘ N– 90 ∘ N). The SMOS SSS maps presented in this work are an improved version of the preliminary three-year dataset generated and freely distributed by the Barcelona Expert Center. In this new version, a time-dependent bias correction has been applied to mitigate the seasonal bias that affected the previous SSS maps. An extensive database of in situ data (Argo floats and thermosalinograph measurements) has been used for assessing the accuracy of this product. The standard deviation of the difference between the new SMOS SSS maps and Argo SSS ranges from 0.25 and 0.35. The major features of the inter-annual SSS variations observed by the thermosalinographs are also captured by the SMOS SSS maps. However, the validation in some regions of the Arctic Ocean has not been feasible because of the lack of in situ data. In those regions, qualitative comparisons with SSS provided by models and the remotely sensed SSS provided by Aquarius and SMAP have been performed. Despite the differences between SMOS and SMAP, both datasets show consistent SSS variations with respect to the model and the river discharge in situ data, but present a larger dynamic range than that of the model. This result suggests that, in those regions, the use of the remotely sensed SSS may help to improve the models.

Sign in / Sign up

Export Citation Format

Share Document