Watershed modeling using large-scale distributed computing in Condor and the Soil and Water Assessment Tool model

SIMULATION ◽  
2011 ◽  
Vol 88 (3) ◽  
pp. 365-380 ◽  
Author(s):  
Margaret W Gitau ◽  
Li-Chi Chiang ◽  
Mohamed Sayeed ◽  
Indrajeet Chaubey

Models are increasingly being used to quantify the effects of best management practices (BMPs) on water quality. While these models offer the ability to study multiple BMP scenarios, and to analyze impacts of various management decisions on watershed response, associated analyses can be very computationally intensive due to a large number of runs needed to fully capture the various uncertainties in the model outputs. There is, thus, the need to develop suitable and efficient techniques to handle such comprehensive model evaluations. We demonstrate a novel approach to accomplish a large number of model runs with Condor, a distributed high-throughput computing framework for model runs with the Soil and Water Assessment Tool (SWAT) model. This application required more than 43,000 runs of the SWAT model to evaluate the impacts of 172 different watershed management decisions combined with weather uncertainty on water quality. The SWAT model was run in the Condor environment implemented on the TeraGrid. This framework significantly reduced the model run time from 2.5 years to 18 days and enabled us to perform comprehensive BMP analyses that may not have been possible with traditional model runs on a few desktop computers. The Condor system can be used effectively to make Monte Carlo analyses of complex watershed models requiring a large number of computational cycles.

2018 ◽  
Vol 10 (3) ◽  
pp. 851 ◽  
Author(s):  
Katherine Merriman ◽  
Amy Russell ◽  
Cynthia Rachol ◽  
Prasad Daggupati ◽  
Raghavan Srinivasan ◽  
...  

Subwatersheds within the Great Lakes “Priority Watersheds” were targeted by the Great Lakes Restoration Initiative (GLRI) to determine the effectiveness of the various best management practices (BMPs) from the U.S. Department of Agriculture-Natural Resources Conservation Service National Conservation Planning (NCP) Database. A Soil and Water Assessment Tool (SWAT) model is created for Alger Creek, a 50 km2 tributary watershed to the Saginaw River in Michigan. Monthly calibration yielded very good Nash–Sutcliffe efficiency (NSE) ratings for flow, sediment, total phosphorus (TP), dissolved reactive phosphorus (DRP), and total nitrogen (TN) (0.90, 0.79, 0.87, 0.88, and 0.77, respectively), and satisfactory NSE rating for nitrate (0.51). Two-year validation results in at least satisfactory NSE ratings for flow, sediment, TP, DRP, and TN (0.83, 0.54, 0.73, 0.53, and 0.60, respectively), and unsatisfactory NSE rating for nitrate (0.28). The model estimates the effect of BMPs at the field and watershed scales. At the field-scale, the most effective single practice at reducing sediment, TP, and DRP is no-tillage followed by cover crops (CC); CC are the most effective single practice at reducing nitrate. The most effective BMP combinations include filter strips, which can have a sizable effect on reducing sediment and phosphorus loads. At the watershed scale, model results indicate current NCP BMPs result in minimal sediment and nutrient reductions (<10%).


2020 ◽  
Vol 63 (2) ◽  
pp. 513-522 ◽  
Author(s):  
Ritesh Karki ◽  
Puneet Srivastava ◽  
Tamie L. Veith

HighlightsThis review study identified five different ways of setting up a SWAT model for field-scale analysis.Model setup for each field-scale modeling method and examples of application are discussed.Benefits and limitations of each method are discussed.Abstract. Although the Soil and Water Assessment Tool (SWAT) has been widely used as a watershed/basin scale model, recently there has been considerable interest in applying it at the field scale, especially for evaluation of best management practices and for building stakeholder confidence. In this study, a thorough review of the literature on field-scale application of SWAT was conducted. It was determined that there is more than one way of setting up a field-scale SWAT model depending on the spatial scale of the research as well as the research question to be answered. This article provides a detailed review of the methods used for field-scale SWAT modeling along with a summary of applications. This article also discusses the limitations and advantages of each method along with future research needs. The overarching goal of this article is to provide a valuable and time-conserving resource for future researchers interested in field-scale SWAT modeling. Keywords: Arc-SWAT, Field level, Field-scale resolution, Field-scale SWAT, SWAT.


Land ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 650
Author(s):  
Wakjira Takala Dibaba ◽  
Tamene Adugna Demissie ◽  
Konrad Miegel

Excessive soil loss and sediment yield in the highlands of Ethiopia are the primary factors that accelerate the decline of land productivity, water resources, operation and function of existing water infrastructure, as well as soil and water management practices. This study was conducted at Finchaa catchment in the Upper Blue Nile basin of Ethiopia to estimate the rate of soil erosion and sediment loss and prioritize the most sensitive sub-watersheds using the Soil and Water Assessment Tool (SWAT) model. The SWAT model was calibrated and validated using the observed streamflow and sediment data. The average annual sediment yield (SY) in Finchaa catchment for the period 1990–2015 was 36.47 ton ha−1 yr−1 with the annual yield varying from negligible to about 107.2 ton ha−1 yr−1. Five sub-basins which account for about 24.83% of the area were predicted to suffer severely from soil erosion risks, with SY in excess of 50 ton ha−1 yr−1. Only 15.05% of the area within the tolerable rate of loss (below 11 ton ha−1yr−1) was considered as the least prioritized areas for maintenance of crop production. Despite the reasonable reduction of sediment yields by the management scenarios, the reduction by contour farming, slope terracing, zero free grazing and reforestation were still above the tolerable soil loss. Vegetative contour strips and soil bund were significant in reducing SY below the tolerable soil loss, which is equivalent to 63.9% and 64.8% reduction, respectively. In general, effective and sustainable soil erosion management requires not only prioritizations of the erosion hotspots but also prioritizations of the most effective management practices. We believe that the results provided new and updated insights that enable a proactive approach to preserve the soil and reduce land degradation risks that could allow resource regeneration.


2013 ◽  
Vol 7 (3) ◽  
pp. 252-257

The subject of this article is the estimation of quantitative (hydrological) and qualitative parameters in the catchment of Ronnea (1800 Km2, located in south western Sweden) through the application of the Soil and Water Assessment Tool (SWAT). SWAT is a river basin model that was developed for the U.S.D.A. Agricultural Research Service, by the Blackland Research Center in Texas. The SWAT model is a widely known tool that has been used in several cases world-wide. It has the ability to predict the impact of land management practices on water, sediment and agricultural chemical yield in large complex watersheds. The present work investigates certain capabilities of the SWAT model which have not identified up to now. More in specific, the main targets of the work carried out are the following: • Identification of the existing hydrological and qualitative conditions • Preparation - Processing of data required to be used as input data of the model • Hydrological calibration - validation of the model, in 7 subbasins of the Catchment of Ronnea • Estimation and evaluation of the simulated qualitative parameters of the model All available data were offered by the relevant Institutes of Sweden, in the framework of the European program EUROHARP. The existing conditions in the catchment of Ronnea, are described in detail including topography, land uses, soil types, pollution sources, agricultural management practices, precipitation, temperature, wind speed, humidity, solar radiation as well as observed discharges and Nitrogen and Phosphorus substances concentrations. Most of the above data were used as input data for the application of SWAT model. Adequate methods were also used to complete missing values in time series and estimate additional parameters (such as soil parameters) required by the model. Hydrological calibration and validation took place for each outlet of the 7 subbasins of Ronnea catchment in an annual, monthly and daily step. The calibration was achieved by estimating parameters related to ground water movement and evaluating convergence between simulated and observed discharges by using mainly the Nash & Sutcliffe coefficient (NTD). Through the sensitivity analysis, main parameters of the hydrological simulation, were detected. According to the outputs of the SWAT model, the water balance of Ronnea catchment was also estimated. Hydrological calibration and validation is generally considered sufficient in an annual and monthly step. Hydrological calibration – validation in daily step, generally does not lead to high values of the NTD indicator. However, when compared to results obtained by the use of SWAT in Greece, a relatively high value of NTD is achieved in one subbasin. Finally, a comparison between the simulated and observed concentrations of total Phosphorus and Nitrogen was carried out.


2013 ◽  
Vol 10 (11) ◽  
pp. 13955-13978 ◽  
Author(s):  
A. A. Shawul ◽  
T. Alamirew ◽  
M. O. Dinka

Abstract. To utilize water resources in a sustainable manner, it is necessary to understand the quantity and quality in space and time. This study was initiated to evaluate the performance and applicability of the physically based Soil and Water Assessment Tool (SWAT) model in analyzing the influence of hydrologic parameters on the streamflow variability and estimation of monthly and seasonal water yield at the outlet of Shaya mountainous watershed. The calibrated SWAT model performed well for simulation of monthly streamflow. Statistical model performance measures, coefficient of determination (r2) of 0.71, the Nash–Sutcliffe simulation efficiency (ENS) of 0.71 and percent difference (D) of 3.69, for calibration and 0.76, 0.75 and 3.30, respectively for validation, indicated good performance of the model simulation on monthly time step. Mean monthly and annual water yield simulated with the calibrated model were found to be 25.8 mm and 309.0 mm, respectively. Overall, the model demonstrated good performance in capturing the patterns and trend of the observed flow series, which confirmed the appropriateness of the model for future scenario simulation. Therefore, SWAT model can be taken as a potential tool for simulation of the hydrology of unguaged watershed in mountainous areas, which behave hydro-meteorologically similar with Shaya watershed. Future studies on Shaya watershed modeling should address the issues related to water quality and evaluate best management practices.


Author(s):  
K. Hema Narayana Reddy ◽  
Mahesh Kothari ◽  
K. S. Reddy ◽  
P. K. Singh ◽  
K. K. Yadav

The current study based on SWAT (Soil and Water Assessment Tool) Model which coordinates the GIS data with attribute database set to assess the runoff of Rela Watershed. Soil and Water Assessment Tool (SWAT) is based on distributed parameter model which has been created to forecast runoff, sediment, erosion and nutrient transport from agrarian watersheds under various management practices. The SWAT Model works related to Arc GIS. In the current study the catchment region has been delineated utilizing the DEM (Digital Elevation Model) and afterward partitioned into 29 sub-watersheds or sub-basins. For planning of landuse map, the LANDSAT images are downloaded from earth explorer and the soil mapis obtained from NBSS (National Bureau of Soil Survey, Udaipur). The sub basins are partitioned into 29 HRUs which represents Hydrological Response Unit. At that point by utilizing 30 years of every day precipitation information and daily minimum and maximum temperature information SWAT simulation is accomplished for consistent schedule to estimate Runoff. The insights indicated diverse runoff framework esteem during the time 19.5 mm being the most minimal and 527.3 mm being the maximum runoff for Rela Watershed. The average annual runoff is 162.6 mm i.e. 28% of total rainfall in Rela Watershed.


Sign in / Sign up

Export Citation Format

Share Document