Determining the Age and Smoothness of Asphalt and Concrete Pavements at the Time of First Rehabilitation using Long-Term Pavement Performance Program Data

Author(s):  
Mary Robbins ◽  
Nam Tran ◽  
Audrey Copeland

Initial performance period is an important input in life-cycle cost analysis (LCCA). An objective of this study was thus to determine actual initial performance periods, as the pavement age at first rehabilitation, for asphalt and concrete pavements using Long-Term Pavement Performance (LTPP) program data. In addition, most agencies use International Roughness Index (IRI), a measure of pavement roughness applicable to both asphalt and concrete pavements, in their decision-making and performance-evaluation process. A secondary objective was, therefore, to determine the pavement roughness condition at the time of first rehabilitation using the same dataset. Based on surveys of highway agencies, initial performance periods frequently used in LCCA for asphalt pavements are between 10 and 15 years, while the average asphalt pavement age at time of first rehabilitation in the LTPP program was found to be approximately 18 years. For concrete pavements, most initial performance periods used in LCCA are between 20 and 25 years, whereas the average concrete pavement age at the time of first rehabilitation in the LTPP program is about 24 years. This suggests initial performance period values used for LCCA do not adequately represent the actual age of asphalt pavements at the time of first rehabilitation, while they are generally representative of actual concrete pavement age at the time of first rehabilitation. Also, it was found that asphalt pavements are typically rehabilitated when they are in good or fair condition according to Federal Highway Administration (FHWA) IRI criteria whereas concrete pavements are typically not rehabilitated until the pavement is in fair or poor condition.

Author(s):  
Y. Jane Jiang ◽  
Shiraz D. Tayabji

Over the years, pavement engineers have attempted to develop rational mechanistic-empirical (M-E) methods for predicting pavement performance. In fact, the next version of AASHTO’s Guide for Design of Pavements is planned to be mechanistically based. Many M-E procedures have been developed on the basis of a combination of laboratory test data, theory, and limited field verification. Therefore, it is important to validate and calibrate these procedures using additional data from in-service pavements. The Long-Term Pavement Performance (LTPP) program data provide the means to evaluate and improve these models. A study was conducted to assess the performance of some of the existing concrete pavement M-E-based distress prediction procedures when used in conjunction with the data being collected as part of the LTPP program. Fatigue cracking damage was estimated using the NCHRP 1–26 approach and compared with observed fatigue damage at 52 GPS-3 test sections. It was shown that the LTPP data can be used successfully to develop better insight into pavement behavior and to improve pavement performance.


2021 ◽  
Author(s):  
Bohuslav Slánský ◽  
Vit Šmilauer ◽  
Jiří Hlavatý ◽  
Richard Dvořák

A jointed plain concrete pavement represents a reliable, historically proven technical solution for highly loaded roads, highways, airports and other industrial surfaces. Excellent resistance to permanent deformations (rutting) and also durability and maintenance costs play key roles in assessing the economic benefits, rehabilitation plans, traffic closures, consumption and recycling of materials. In the history of concrete pavement construction, slow-to-normal hardening Portland cement was used in Czechoslovakia during the 1970s-1980s. The pavements are being replaced after 40-50 years of service, mostly due to vertical slab displacements due to missing dowel bars. However, pavements built after 1996 used rapid hardening cements, resulting in long-term surface cracking and decreased durability. In order to build durable concrete pavements, slower hardening slag-blended binders were designed and tested in the restrained ring shrinkage test and in isothermal calorimetry. Corresponding concretes were tested mainly for the compressive/tensile strength evolution and deicing salt-frost scaling to meet current specifications. The pilot project was executed on a 14 km highway, where a unique temperature-strain monitoring system was installed to provide long-term data from the concrete pavement. A thermo-mechanical coupled model served for data validation, showing a beneficial role of slower hydration kinetics. Continuous monitoring interim results at 24 months have revealed small curling induced by drying and the overall small differential shrinkage of the slab.


2017 ◽  
Vol 19 (3) ◽  
pp. 31-43
Author(s):  
Ju Myeong Lee ◽  
Seung Beom Baek ◽  
Kang Hoon Lee ◽  
Jo Soon Kim ◽  
Jin Hoon Jeong

2006 ◽  
Vol 33 (10) ◽  
pp. 1279-1286
Author(s):  
Jong-Suk Jung ◽  
Emmanuel B Owusu-Antwi ◽  
Ji-Hwan An

The objective of this study was to identify and quantify design and construction features most important to joint faulting of joint plain concrete pavements. With data obtained from the Long-Term Pavement Performance (LTPP) database, an analysis approach that combined pavement engineering expertise and modern data analysis techniques was to develop guidelines for improved design and construction of Portland cement concrete (PCC) pavement. The approach included typical preliminary analyses, but emphasis was placed on using a series of multivariate data analysis techniques. Discriminant analysis was used to develop models that classify individual pavement into performance groups developed by cluster analysis, which was used to partition the pavements into three distinct groups representing good, normal, and poor performance. These models can be used to classify and evaluate additional or new pavements performance throughout the pavement's design life. To quantify the levels of the key design and construction features that contribute to performance, the classification and regression tree procedure was used to develop tree-based models for performance measure. The analysis approach described was used to develop the guideline on the key design and construction features that can be used by designers to decrease joint faulting of jointed plain concrete pavements (JPCPs).Key words: faulting, Long-Term Pavement Performance (LTPP), jointed plain concrete pavement (JPCP), cluster analysis, discriminant analysis, classification and regression tree (CART) analysis.


Author(s):  
Jian-Shiuh Chen ◽  
Han-Chang Ho ◽  
Yen-Yu Lin

The two primary factors that drive the use of reclaimed asphalt pavement (RAP) are economic savings and environmental benefits. However, highway agencies are concerned about the use of a high percentage of RAP in asphalt pavements. This study addressed issues related to the production, construction, properties, and performance of asphalt pavements that contain high percentages of RAP. Mixtures that contained up to 40% RAP were successfully designed, produced, and constructed after proper procedures were followed and attention to detail was paid during design, production, and construction. A separate drum for drying and heating RAP, called a parallel heating system, was used to produce high RAP content asphalt mixtures in a batch plant. Rejuvenating agents were mixed directly in a surge bin to allow the rejuvenator enough time to diffuse into aged RAP binder. Comprehensive laboratory tests were performed to evaluate the air voids, the resilient modulus, the rut depth, and the Cantabro weight loss of asphalt mixtures with high RAP content. A test road was constructed in 2014 to monitor how high RAP asphalt pavements would perform under real traffic and environmental conditions. An in-depth investigation was conducted of pavement performance, including cracking, friction, and rutting. The engineering properties of plant-produced mixtures and field cores were well correlated with the pavement performance of the test road. Test results indicated that high RAP content asphalt mixtures could perform as satisfactorily as those produced with virgin materials to meet in-service requirements.


Author(s):  
Marcelo G. Bustos ◽  
Juan E. Marcet ◽  
Oscar V. Cordo ◽  
Pablo Girardi Mancini ◽  
Miguel O. Pereyra ◽  
...  

Author(s):  
James Greene ◽  
Ohhoon Kwon ◽  
Abdenour Nazef ◽  
Bouzid Choubane

Flexible pavements are often rehabilitated by milling distressed asphalt and placing new asphalt at a thickness that accounts for expected traffic growth and pavement life. However, there are many reported benefits to concrete overlays as a method to rehabilitate and preserve distressed asphalt pavements. In 1988, the Florida Department of Transportation designed and constructed an unbonded concrete overlay on US-1 between Daytona Beach and Titusville. The 1.9-mile concrete overlay was part of a larger 8-mile milling and resurfacing of a deteriorated asphalt pavement. The concrete overlay test sections were divided into three groups based on design thicknesses of 6, 7, and 8 inches. Each of these groups included subsections with three joint spacing levels and two dowel bar configurations consisting of standard 12-inch spacing and wheel path only. The overlay sections are still in service with no major rehabilitation effort. The primary distress is pavement roughness found in sections with wheel path dowels only. The section with the most cracked slabs had joint spacings of 20 ft, which is no longer recommended. This paper documents the experimental program and presents the analysis and findings.


Sign in / Sign up

Export Citation Format

Share Document