Parametric study and multi-objective optimization in single-point incremental forming of extra deep drawing steel sheets

2015 ◽  
Vol 230 (5) ◽  
pp. 825-837 ◽  
Author(s):  
Suresh Kurra ◽  
Nasih HR ◽  
Srinivasaprakash Regalla ◽  
Amit Kumar Gupta
Keyword(s):  
Parametric Study ◽  
Deep Drawing ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Steel Sheets

Achieving maximum dimensional accuracy and surface quality at the shortest possible time in single-point incremental forming via multi-objective optimization

2018 ◽  
Vol 233 (3) ◽  
pp. 900-913 ◽  
Author(s):  
Abolfazl Taherkhani ◽  
Ali Basti ◽  
Nader Nariman-Zadeh ◽  
Ali Jamali
Keyword(s):  
Surface Quality ◽  
Sheet Metal ◽  
Incremental Forming ◽  
Single Point ◽  
Dimensional Accuracy ◽  
Numerical Control ◽  
Single Point Incremental Forming ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Design Variables

Single-point incremental forming is a novel and flexible method for producing three-dimensional parts from metal sheets. Although single-point incremental forming is a suitable method for rapid prototyping of sheet metal components, there are limitations and challenges facing the commercialization of this process. Dimensional accuracy, surface quality, and production time are of vital importance in any manufacturing process. The present study is aimed at selecting proper forming parameters to produce sheet metal parts which possess dimensional accuracy and good surface quality at the shortest time. Four parameters (i.e. tool diameter, tool step depth, sheet thickness, and feed rate) are chosen as design variables. These parameters are used for the modeling of the process using Group Method of Data Handing(GMDH) artificial neural networks. The data necessary for establishing empirical models are obtained from single-point incremental forming experiments carried out on a computer numerical control milling machine using central composite design. After the evaluation of the model accuracy, single- and multi-objective optimization are performed via genetic algorithm. The performance of the design variables of a tradeoff point corresponding to one of the experiments shows the efficiency and accuracy of the models and the optimization process. Considering the priorities of objective functions, a designer will be able to set proper process parameters.

A Dynamic Model for KUKA KR6 in SPIF Processes

2019 ◽  
Vol 957 ◽  
pp. 156-166 ◽  
Author(s):  
Mihai Crenganis ◽  
Akos Csiszar
Keyword(s):  
Dynamic Model ◽  
Model Validation ◽  
Incremental Forming ◽  
Industrial Robot ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Plastic Deformations ◽  
Metal Parts ◽  
Steel Sheets ◽  
Metal Sheets

The paper presents the development of a dynamic model for the KUKA KR6 robot during single point incremental forming (SPIF) of metal sheets. The dynamic model of the KUKA KR6 robot is created in MATLAB®-SimMechanics. This dynamic model is necessary to verify that the mechanical structure of this low payload industrial robot of 36 Kg capacity can withstand some specific forces in incremental forming of some low plasticity alloys like Ti6Al4V. In the Centre of Studies and Research for Plastic Deformations of "Lucian Blaga" University of Sibiu, different attempts on single point incremental forming of thin metal sheets have been carried out and some of the studies are based on SPIF using the KUKA KR6-2 industrial robot. Nevertheless, the previous experimental attempts using the KUKA KR 6-2 robot in SPIF processes were realised only on 0.4 mm thick DC04 steel sheets. This material has very good deformability properties and the forces during the process are relatively small. After the dynamic model validation some specific circular trajectories are imposed and the forces that can appear during SPIF process for Ti6Al4V alloy sheets are taken into consideration. After forces analysis, it was concluded that the KUKA KR6 robot can be used in single point incremental forming processes for metal parts requiring greater forming forces.

scholarly journals Design and manufacturing of a fixing device for incremental sheet forming process

2018 ◽  
Vol 178 ◽  
pp. 02004 ◽  
Author(s):  
Daniel Nasulea ◽  
Gheorghe Oancea
Keyword(s):  
Sheet Metal ◽  
Deep Drawing ◽  
Incremental Forming ◽  
Single Point ◽  
Fem Simulation ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Design And Manufacturing

In incremental sheet forming processes, the expensive dedicated tool are avoided and replaced with a cheap and simple fixing device which support the sheet metal blanks. The current paper presents how a fixing device used for single point incremental forming device is designed, FEM simulated and manufactured. The fixing device can be used for parts with a cone frustum and pyramidal frustum made of DC05 deep drawing steel. The forces developed in the process and the device displacements were estimated using FEM simulation. The device components were manufactured using a CNC machines and the physical assembly is also presented in the paper.

Economical and Ecological Aspects of Single Point Incremental Forming Versus Deep Drawing Technology

2007 ◽  
Vol 344 ◽  
pp. 931-938 ◽  
Author(s):  
Aleš Petek ◽  
Gašper Gantar ◽  
Tomaz Pepelnjak ◽  
Karl Kuzman
Keyword(s):  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Deep Drawing ◽  
Metal Forming ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Forming Technology ◽  
Ecological Aspects

In contemporary industrial production the ecological aspects have increasingly important role in selection of sheet metal forming process. To produce sheet metal parts with minimal environmental burdening the shortening of forming processes including the procedures for production of appurtenant forming tools as well as decrease use of lubricant is prerequisite. The ecological aspects have to be considered also already in developmental phase where the forming technology is evaluated in digital environment with FEM simulations. In addition, particularly in small and medium batch production the geometrically complex parts are difficult to form economically with conventional forming processes like deep drawing or stretching. Therefore, new concepts like hydro-mechanical forming or incremental sheet metal forming were developed. In order to select the optimal forming process the production costs as well as the environmental aspects like lubrication, noise, pollution and energy per produced part have to be considered. The paper is focused towards the comparison of conventional deep drawing (DD) process aimed for forming the pyramid-shaped part with single point incremental forming technology (SPIF). The economical and ecological aspects affecting the successful forming by both concepts are determined. Comparative evaluation was established in order to present advantages and drawbacks of each analysed technology.

Improve the Micro-hardness of Single Point Incremental Forming Product Using Magnetic Abrasive Finishing

2020 ◽  
Vol 38 (8A) ◽  
pp. 1137-1142
Author(s):  
Baqer A. Ahmed ◽  
Saad K. Shather ◽  
Wisam K. Hamdan
Keyword(s):  
Vickers Hardness ◽  
Feed Rate ◽  
Incremental Forming ◽  
Single Point ◽  
Single Point Incremental Forming ◽  
Step Size ◽  
Coil Current ◽  
Magnetic Abrasive Finishing ◽  
Finishing Process ◽  
Abrasive Finishing

In this paper the Magnetic Abrasive Finishing (MAF) was utilized after Single Point Incremental Forming (SPIF) process as a combined finishing process. Firstly, the Single Point Incremental forming was form the truncated cone made from low carbon steel (1008-AISI) based on Z-level tool path then the magnetic abrasive finishing process was applied on the surface of the formed product. Box-Behnken design of experiment in Minitab 17 software was used in this study. The influences of different parameters (feed rate, machining step size, coil current and spindle speed) on change in Micro-Vickers hardness were studied. The maximum and minimum change in Micro-Vickers hardness that achieved from all the experiments were (40.4 and 1.1) respectively. The contribution percent of (feed rate, machining step size, coil current and spindle speed) were (7.1, 18.068, 17.376 and 37.894) % respectively. After MAF process all the micro surface cracks that generated on the workpiece surface was completely removed from the surface.

Sign in / Sign up

Export Citation Format

Share Document