Free vibration analysis of functionally graded double-tapered beam rotating in thermal environment considering geometric nonlinearity, shear deformability, and Coriolis effect

2017 ◽  
Vol 232 (12) ◽  
pp. 2244-2262 ◽  
Author(s):  
Suman Pal ◽  
Debabrata Das
Keyword(s):  
Mathematical Model ◽  
Free Vibration ◽  
Material Properties ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Ritz Method ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Coriolis Effect ◽  
Governing Equations

The present work investigates the free vibration behavior of double-tapered functionally graded beams rotating in thermal environment, using an improved mathematical model. The functional gradation for ceramic–metal compositions, following power-law, is considered to be symmetric with respect to the mid-plane, leading to metal-rich core and ceramic-rich outer surfaces of the beam. The temperature dependence of the material properties are considered using Touloukian model. The nonlinearity in strain–displacement relationships for both the axial and transverse shear strains are considered. Firstly, the governing equations for deformed beam configuration under time-independent centrifugal loading are obtained using minimum total potential energy principle, and the solution is obtained following Ritz method. Then the free vibration problem of the centrifugally deformed beam is formulated employing Lagrange’s principle and considering tangent stiffness of the deformed beam configuration. Coriolis effect is considered in the mathematical model, and the governing equations are transformed to the state-space for obtaining an eigenvalue problem. The results for the first two modes of both chord-wise and flap-wise vibrations are presented in nondimensional plane to show the effects of taperness parameter, root-offset parameter, volume fraction exponent, operating temperature, and functionally graded material composition. The results in comparative form are presented for both temperature-dependent and temperature-independent material properties.

FREE VIBRATION OF FUNCTIONALLY GRADED PLATES WITH A HIGHER-ORDER SHEAR AND NORMAL DEFORMATION THEORY

2013 ◽  
Vol 13 (01) ◽  
pp. 1350004 ◽  
Author(s):  
D. K. JHA ◽  
TARUN KANT ◽  
R. K. SINGH
Keyword(s):  
Free Vibration ◽  
Material Properties ◽  
Deformation Theory ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Free Vibration Analysis ◽  
Higher Order ◽  
Functionally Graded ◽  
Normal Deformation ◽  
Fg Plates

Free vibration analysis of functionally graded elastic, rectangular, and simply supported (diaphragm) plates is presented based on a higher-order shear and normal deformation theory (HOSNT). Although functionally graded materials (FGMs) are highly heterogeneous in nature, they are generally idealized as continua with mechanical properties changing smoothly with respect to the spatial coordinates. The material properties of functionally graded (FG) plates are assumed here to be varying through the thickness of the plate in a continuous manner. The Poisson ratios of the FG plates are assumed to be constant, but their Young's modulii and densities vary continuously in the thickness direction according to the volume fraction of constituents which is mathematically modeled as a power law function. The equations of motion are derived using Hamilton's principle for the FG plates on the basis of a HOSNT assuming varying material properties. Numerical solutions are obtained by the use of Navier solution method. The accuracy of the numerical solutions is first established through comparison with the exact three-dimensional (3D) elasticity solutions and the present solutions are then compared with available solutions of other models.

Free vibration analysis of rotating functionally graded material plate under nonlinear thermal environment using higher order shear deformation theory

2018 ◽  
Vol 233 (6) ◽  
pp. 2056-2073 ◽  
Author(s):  
S Parida ◽  
SC Mohanty
Keyword(s):  
Free Vibration ◽  
Functionally Graded Material ◽  
Vibration Analysis ◽  
Deformation Theory ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Shear Deformation Theory ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Graded Material

In the present article, a higher order shear deformation theory is used to develop a finite element model for the free vibration analysis of a rotating functionally graded material plate in the thermal environment. The model is based on an eight-noded isoparametric element with seven degrees-of-freedom per node. The material properties are temperature dependent and graded along its thickness according to a simple power law distribution in terms of volume fraction of the constituents. The general displacement equation provides C0 continuity, and the transverse shear strain undergoes parabolic variation through the thickness of the plate. Therefore, the shear correction factor is not used in this theory. The obtained results are compared with the published results in the literature to determine the accuracy of the method. The effects of various parameters like hub radius, rotation speed, aspect ratio, thickness ratio, volume fraction index, and temperature on the frequency of rotating plate are investigated.

Free Vibration Analysis of Functionally Graded Beams Resting on Elastic Foundation in Thermal Environment

2016 ◽  
Vol 16 (07) ◽  
pp. 1550029 ◽  
Author(s):  
P. Zahedinejad
Keyword(s):  
Free Vibration ◽  
Elastic Foundation ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Differential Quadrature Method ◽  
Free Vibration Analysis ◽  
Beam Theory ◽  
Functionally Graded ◽  
Power Law Distribution ◽  
Various Boundary Conditions

The free vibration of functionally graded (FG) beams with various boundary conditions resting on a two-parameter elastic foundation in the thermal environment is studied using the third-order shear deformation beam theory. The material properties are temperature-dependent and vary continuously through the thickness direction of the beam, based on a power-law distribution in terms of the volume fraction of the material constituents. In order to discretize the governing equations, the differential quadrature method (DQM) in conjunction with the Hamilton’s principle is adopted. The convergence of the method is demonstrated. In order to validate the results, comparisons are made with solutions available for the isotropic and FG beams. Through a comprehensive parametric study, the effect of various parameters involved on the FG beam was studied. It is concluded that the uniform temperature rise has more significant effect on the frequency parameters than the nonuniform case.

scholarly journals Large deformation behavior of functionally graded porous curved beams in thermal environment

2021 ◽  
Author(s):  
S. F. Nikrad ◽  
A. Kanellopoulos ◽  
M. Bodaghi ◽  
Z. T. Chen ◽  
A. Pourasghar
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Ritz Method ◽  
Shear Deformation Theory ◽  
Bending Moment ◽  
Functionally Graded ◽  
Equilibrium Path ◽  
Curved Beams ◽  
Governing Equations

AbstractThe in-plane thermoelastic response of curved beams made of porous materials with different types of functionally graded (FG) porosity is studied in this research contribution. Nonlinear governing equations are derived based on the first-order shear deformation theory along with the nonlinear Green strains. The nonlinear governing equations are solved by the aid of the Rayleigh–Ritz method along with the Newton–Raphson method. The modified rule-of-mixture is employed to derive the material properties of imperfect FG porous curved beams. Comprehensive parametric studies are conducted to explore the effects of volume fraction and various dispersion patterns of porosities, temperature field, and arch geometry as well as boundary conditions on the nonlinear equilibrium path and stability behavior of the FG porous curved beams. Results reveal that dispersion and volume fraction of porosities have a significant effect on the thermal stability path, maximum stress, and bending moment at the crown of the curved beams. Moreover, the influence of porosity dispersion and structural geometry on the central radial and in-plane displacement of the curved beams is evaluated. Results show that various boundary conditions make a considerable difference in the central radial displacements of the curved beams with the same porosity dispersion. Due to the absence of similar results in the specialized literature, this paper is likely to provide pertinent results that are instrumental toward a reliable design of FG porous curved beams in thermal environment.

Differential Quadrature Free Vibration Analysis of Functionally Graded Thin Annular Sector Plates in Thermal Environments

2018 ◽  
Vol 140 (10) ◽  
Author(s):  
S. H. Mirtalaie
Keyword(s):  
Free Vibration ◽  
Natural Frequencies ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Plate Theory ◽  
Differential Quadrature Method ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Differential Quadrature ◽  
Annular Sector

In this paper, the free vibration behavior of functionally graded (FG) thin annular sector plates in thermal environment is studied using the differential quadrature method (DQM). The material properties of the FG plate are assumed to be temperature dependent and vary continuously through the thickness, according to the power-law distribution of the volume fraction of the constituents. The nonlinear temperature distribution along the thickness direction of the plate is considered. Based on the classical plate theory, the governing differential equations of motion of the plate are derived and solved numerically using DQM. The natural frequencies of thin FG annular sector plates in thermal environment under various combinations of clamped, free, and simply supported boundary conditions (BCs) are presented for the first time. To ensure the accuracy of the method, the natural frequencies of a pure metallic plate are calculated and compared with those existing in the literature for the homogeneous plate where the results are in good agreement. The effects of temperature field, BCs, volume fraction exponent, radius ratio, and the sector angle on the free vibrations of the FG-plate are examined.

Free Vibration Analysis of FGM Plates under Initial Thermal Stresses

2013 ◽  
Vol 682 ◽  
pp. 49-56 ◽  
Author(s):  
A. Mahi ◽  
E.A. Adda-Bedia ◽  
A. Benkhedda
Keyword(s):  
Free Vibration ◽  
Material Properties ◽  
Thermal Stresses ◽  
Plate Theory ◽  
Ritz Method ◽  
Free Vibration Analysis ◽  
Energy Functional ◽  
Functionally Graded ◽  
Power Law Distribution ◽  
Graded Materials

Functionally graded materials (FGMs) are a new kind of composite materials which have a smooth variation of material properties along one or more directions. At each interface, the material is chosen according to specific applications and environment loadings. This paper presents some solutions to study the free vibration of FGM plates made of ceramic and metal. The formulation used is based on Reddys higher order shear deformation plate theory. Material properties are taken to be temperature-dependent, and vary continuously through the thickness direction according to a power law distribution (P-FGM). The plate is assumed to be initially stressed by temperature rise through the thickness. The energy functional of the system is obtained by using energy principles. Free vibration frequencies are then obtained by using a set of characteristic orthogonal polynomials and by applying Ritz method.

Stochastic Nonlinear Free Vibration Analysis of Functionally Graded Beam Subjected to Thermal Loading with Random Material Properties

2013 ◽  
Vol 747 ◽  
pp. 551-554
Author(s):  
Niranjan L. Shegokar ◽  
Achchhe Lal
Keyword(s):  
Free Vibration ◽  
Material Properties ◽  
Thermal Loading ◽  
Volume Fraction ◽  
Perturbation Technique ◽  
Shear Deformation Theory ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Nonlinear Free Vibration ◽  
Functionally Graded Beam

This paper deals with the stochastic nonlinear free vibration response of functionally graded materials (FGMs) beam subjected to thermal loadings with uncertain material properties subjected to uniform and nonuniform temperature changes with temperature independent (TID) and dependent (TD) material properties. System properties such as material properties of each constituents material and volume fraction index are taken as independent random input variables. The basic formulation is based on higher order shear deformation theory (HSDT) with von-Karman nonlinear strains using modified C0 continuity. A direct iterative based nonlinear finite element method in conjunction with first order perturbation technique (FOPT) is used for FGMs beam to compute the second order statistics (mean and coefficient of variation) of the nonlinear fundamental frequency. The present outlined approach has been validated with the results available in literatures and independent Monte Carlo simulation (MCS).

scholarly journals Free Vibration Analysis of Rotating Pretwisted Functionally Graded Sandwich Blades

2018 ◽  
Vol 2018 ◽  
pp. 1-18 ◽  
Author(s):  
L. T. Liu ◽  
Y. X. Hao ◽  
W. Zhang ◽  
J. Chen
Keyword(s):  
Free Vibration ◽  
Volume Fraction ◽  
Ritz Method ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Thickness Ratio ◽  
Mode Shapes ◽  
Homogeneous Material ◽  
Characteristic Analysis ◽  
Structural Dynamic

A new structural dynamic model for the free vibration characteristic analysis of rotating pretwisted functionally graded (FG) sandwich blades is developed. The sandwich blade is made up of two functionally graded skins and a homogeneous material core. The thick shell theory is applied to derive the basic equations of motion of the rotating FG sandwich blade by considering the effects of centrifugal and Coriolis forces. The mode shapes are expanded in terms of two-dimensional algebraic polynomials in the Rayleigh–Ritz method, and the static and dynamic natural frequencies of the blade are obtained. The convergence analysis is studied, and the accuracy of the proposed model is verified by comparing with the literature results and ANSYS data. The effects of frequency parameters such as the twist angle, the thickness ratio, the aspect ratio, the layer thickness ratio, the scalar parameter of volume fraction, the stagger angle, and the rotation velocity on the vibration characteristics for pretwist FG sandwich blade are investigated in detail. In addition, the phenomena of frequency locus veering and mode shape exchanging occur in the static and dynamic states. Frequency locus veering is essentially caused by the coupling between different modes.

Free Vibration Analysis of Functionally Graded Skew Plate in Thermal Environment Using Higher Order Theory

2018 ◽  
Vol 10 (01) ◽  
pp. 1850007 ◽  
Author(s):  
Smita Parida ◽  
Sukesh Chandra Mohanty
Keyword(s):  
Free Vibration ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Shear Deformation Theory ◽  
Free Vibration Analysis ◽  
Higher Order ◽  
Functionally Graded ◽  
Transverse Shear Strain ◽  
Power Law Distribution ◽  
Skew Angle

This paper deals with the free vibration of a skew functionally graded material (FGM) plate in the thermal environment. A higher-order shear deformation theory (HOSDT) is employed to develop a finite element model of the plate. The material properties are assumed to be temperature-dependent and are graded along the thickness direction as per simple power law distribution in terms of volume fraction of metal and ceramic constituent phases. The model is based on an eight-noded isoparametric element with seven degrees of freedom (DOFs) per node. The general displacement equation provides C[Formula: see text] continuity. The transverse shear strain undergoes parabolic variation through the thickness of the plate. The governing equations are derived using the Hamilton’s principle. The obtained results are compared with the published results to determine the accuracy of the method. The effects of various parameters like aspect ratio, side-thickness ratio, volume fraction index, boundary conditions and skew angle on the natural frequencies are investigated.

Sign in / Sign up

Export Citation Format

Share Document