Dynamic analysis of semi-active MR suspension system considering response time and damping force curve

2021 ◽  
pp. 1045389X2098392
Author(s):  
Jong-Seok Oh ◽  
Kyungho Jeon ◽  
Gi-Woo Kim ◽  
Seung-Bok Choi
Keyword(s):  
Response Time ◽  
Mr Damper ◽  
Body Motion ◽  
Core Material ◽  
Ride Quality ◽  
Control Performance ◽  
Force Curve ◽  
Damping Force ◽  
Time Control ◽  
Damping Characteristics

To obtain a good ride quality and smooth car body motion, many studies have focused on the damper. Passive dampers are unable to respond actively to changes in the environment; hence many studies are being conducted on semi-active dampers that use magnetorheological (MR) fluids. As the damping characteristics of the MR damper, such as the response time, control gain, and gradient of the damping force curve, can significantly affect the control performance of the vehicle, the damping characteristics of the MR damper should be carefully considered. Accordingly, in this study, we developed a method for selecting the damping characteristics of an MR damper for specific vehicle types and analyze the relation between the dynamic characteristics of MR damper and driving performances. To achieve this objective, we demonstrated that the damping characteristics can be tuned according to the additional flow path, groove, and core material. To confirm the enhancement of the ride quality, vibration control performance, and steering stability, the skyhook controller was considered. Since we obtained the suitable damping characteristics that met the requirements under random road profiles and bumpy roads, the realization of these characteristics will enable us to satisfy the driving requirements.

Damping characteristics of a magneto-rheological damper with dual independent controllable ducts

2021 ◽  
pp. 1045389X2110188
Author(s):  
Jianqiang Yu ◽  
Xiaomin Dong ◽  
Tao Wang ◽  
Zhengmu Zhou ◽  
Yaqin Zhou
Keyword(s):  
Dynamic Range ◽  
Fluid Flows ◽  
Mr Damper ◽  
Viscous Damping ◽  
The Novel ◽  
The Finite Element Method ◽  
Damping Force ◽  
Damping Characteristics ◽  
Magneto Rheological ◽  
The Mathematical Model

This paper presents the damping characteristics of a linear magneto-rheological (MR) damper with dual controllable ducts based on numerical and experimental analysis. The novel MR damper consisting of a dual-rod cylinder system and a MR valve is used to reduce the influences of viscous damping force and improve dynamic range. Driven by the dual-rod cylinder system, MR fluid flows in the MR valve. The pressure drop of the MR valve with dual independent controllable ducts can be controlled by tuning the current of two independent coils. Based on the mathematical model and the finite element method, the damping characteristics of the MR damper is simulated. A prototype is designed and tested on MTS machine to evaluate its damping characteristics. The results show that the working states and damping force of the MR damper can be controlled by the two independent coils.

Realization of desired damping characteristics based on an open-loop-controlled magnetorheological damper

2021 ◽  
pp. 107754632110388
Author(s):  
Hongwei Lu ◽  
Zhifei Zhang ◽  
Yansong He ◽  
Zhi Li ◽  
Jujiang Xie ◽  
...  
Keyword(s):  
Control System ◽  
Control Method ◽  
Characteristic Curve ◽  
Mr Damper ◽  
Open Loop ◽  
Low Noise ◽  
Magnetorheological Damper ◽  
Bench Test ◽  
Damping Force ◽  
Damping Characteristics

The realization of the desired damping characteristics based on magnetorheological (MR) dampers is important for semi-active control and useful for the matching process of suspension damper. To reduce the cost of the control system and improve the output accuracy of the desired damping force, this study proposes an open-loop control method featuring an accurate inverse model of the MR damper and a tripolar current driver. The reversible sigmoid model is used to accurately and quickly calculate the desired current. Furthermore, the change characteristic of the desired current is analyzed qualitatively and quantitatively, which shows that the desired current needs to change suddenly to make the actual damping force velocity curve quickly approach the desired one. To meet the demand of the desired current, a tripolar current driver controlled by an improved PI control algorithm is proposed, which is with fast response and low noise. Finally, the bench test verifies that the control system can achieve different desired damping characteristics well, and the inherent error in this process is explained through the gap between the available damping force area and the desired damping characteristic curve and the crossover phenomenon of the dynamic characteristic curves of the MR damper.

Comparative Study of Magnetorheological Damper Models for Force Tracking

2015 ◽  
Author(s):  
Anria Strydom ◽  
Werner Scholtz ◽  
Schalk Els
Keyword(s):  
Computational Efficiency ◽  
Ride Comfort ◽  
Mr Damper ◽  
Magnetorheological Damper ◽  
Damping Force ◽  
Suspension Systems ◽  
Mr Dampers ◽  
Damping Characteristics ◽  
Force Tracking ◽  
Control Application

Magnetorheological (MR) dampers are controllable semi-active dampers capable of providing a range of continuous damping settings. MR dampers are often incorporated in suspension systems of vehicles where conflicting damping characteristics are required for favorable ride comfort and handling behavior. For control applications the damper controller determines the required damper current in order to track the desired damping force, often by using a suitable MR damper model. In order to utilise the fast switching time capability of MR dampers, a model that can be used to directly calculate damper current is desired. Unfortunately few such models exist and other methods, which often negatively affect the computational efficiency of the model, need to be used when implementing these models. In this paper a selection of MR damper models are developed and evaluated for both accuracy and computational efficiency while tracking a desired damping force. The Kwok model is identified as a suitable candidate for the intended suspension control application.

Magneto-Rheological (MR) Damper Design for High-Flowrate Suspensions

2013 ◽  
Author(s):  
Riaan F. Meeser ◽  
P. Schalk Els ◽  
Sudhir Kaul
Keyword(s):  
Mr Damper ◽  
Damping Force ◽  
Mr Fluid ◽  
Bingham Plastic ◽  
Damping Characteristics ◽  
Final Design ◽  
Variable Damping ◽  
Input Variables ◽  
Damper Design ◽  
Magneto Rheological

This paper presents the design of a magneto-rheological (MR) damper for an off-road vehicle where large suspension travel and high flow rates, as compared to typical passenger car suspensions, are required. The MR damper is expected to enhance the capability of the suspension system by allowing variable damping due to inherent properties of the MR fluid. MR fluids exhibit a reversible behavior that can be controlled with the intensity of a magnetic field, allowing a change in the effective viscosity and thereby in the damping characteristics of the fluid. A mathematical model of the proposed damper has been developed using the Bingham plastic model so as to determine the necessary geometry for the damper designed in this study, using the fluid flow rate and current to the electromagnet as the input variables. The model is used to compute the damping force, and the analytical results show that the designed MR damper provides the required range of damping force for the specific vehicle setup that is being used for this study. A valve-mode MR fluid channel has been designed such that the required minimum damping is reached in the off-state, and the desired maximum damping is reached in the on-state. For manufacturing and size considerations, the final design incorporates a triple pass layout with the MR fluid flowing through the three passages that are arranged in an S-shape so as to minimize the cross section of the electromagnet core.

scholarly journals Damping Force Tracking Control of MR Damper System Using a New Direct Adaptive Fuzzy Controller

2015 ◽  
Vol 2015 ◽  
pp. 1-16 ◽  
Author(s):  
Xuan Phu Do ◽  
Kruti Shah ◽  
Seung-Bok Choi
Keyword(s):  
Vibration Control ◽  
Tracking Control ◽  
Fuzzy Controller ◽  
Tracking Error ◽  
Mr Damper ◽  
Control Performance ◽  
Damping Force ◽  
Adaptive Fuzzy Controller ◽  
Adaptive Fuzzy ◽  
Force Tracking

This paper presents a new direct adaptive fuzzy controller and its effectiveness is verified by investigating the damping force tracking control of magnetorheological (MR) fluid based damper (MR damper in short) system. In the formulation of the proposed controller, a model of interval type 2 fuzzy controller is combined with the direct adaptive control to achieve high performance in vibration control. In addition,H∞(Hinfinity) tracking technique is used in building a model of the direct adaptive fuzzy controller in which an enhanced iterative algorithm is combined with the fuzzy model. After establishing a closed-loop control structure to achieve high control performance, a cylindrical MR damper is adopted and damping force tracking results are obtained and discussed. In addition, in order to demonstrate the effectiveness of the proposed control strategy, two existing controllers are modified and tested for comparative work. It has been demonstrated from simulation and experiment that the proposed control scheme provides much better control performance in terms of damping force tracking error. This leads to excellent vibration control performance of the semiactive MR damper system associated with the proposed controller.

A ride quality evaluation of a semi-active railway vehicle suspension system with MR damper: Railway field tests

2016 ◽  
Vol 231 (3) ◽  
pp. 306-316 ◽  
Author(s):  
Hwan-Choong Kim ◽  
Yu-Jeong Shin ◽  
Wonhee You ◽  
Kyu Chul Jung ◽  
Jong-Seok Oh ◽  
...  
Keyword(s):  
Field Tests ◽  
Mr Damper ◽  
Suspension System ◽  
Ride Quality ◽  
Railway Vehicle ◽  
Damping Force ◽  
Magneto Rheological ◽  
Vehicle Suspension System ◽  
Design And Manufacture

This work presents experimental assessment of the improvements to the horizontal ride quality of a railway vehicle equipped with a semi-active magneto-rheological (MR) suspension system. The assessment includes the development of a mathematical model and magnetic circuit analysis of the MR damper, the design and manufacture of MR damper, and field test on the railway. After evaluating the field-dependent damping force characteristics, the conventional passive dampers of the operational railway vehicle are replaced with the MR dampers to evaluate horizontal dynamic characteristics that directly indicates the ride quality of the railway vehicle. Various sensors are installed in the vehicle and a skyhook controller with semi-active condition is implemented to produce an appropriate input current for the generation of the desired damping force. Three periods of testing are undertaken on the railway bridge at 120 km/h and the measured data of acceleration level are recoded and presented. It is demonstrated from the measured results that the vibration can be effectively controlled by the proposed semi-active MR suspension system associated with the skyhook controller. Finally, from the vibration control responses the horizontal ride quality of railway vehicle is evaluated and presented in frequency domain.

Experimental Evaluation of Magnetorheological Damper Characteristics for Vibration Analysis

2018 ◽  
Vol 10 (1) ◽  
Author(s):  
S. Siva Kumar ◽  
K.S. Raj Kumar ◽  
Navaneet Kumar
Keyword(s):  
Vibration Isolation ◽  
Mr Damper ◽  
Magnetorheological Damper ◽  
Damping Force ◽  
Mr Fluid ◽  
Damping Characteristics ◽  
Fluid Damper ◽  
Mr Fluid Damper ◽  
Stiffness And Damping ◽  
Theoretical Results

Magnetorheological (MR) fluid damper has been designed, fabricated and tested to find the stiffness and damping characteristics. Experimentally the MR damper has been tested to analyse the behaviour of MR fluid as well as to obtain the stiffness for varying magnetic field. MR damper mathematical model has been developed for evaluating dynamic response for experimentally obtained parameters. The experimental results show that the increase of applied electric current in the MR damper, the damping force will increase remarkably up to the saturation value of current. The numerical simulation results that stiffness of the MR damper can be varied with the current value and increase the damping forces with the reduced amplitude of excitation. Experimental and theoretical results of the MR damper characteristics demonstrate that the developed MR damper can be used for vibration isolation and suppression.

Design and Drop Test of Aircraft Landing Gear’s Shock Absorber Based on Magnetorheological Damper

2014 ◽  
Vol 665 ◽  
pp. 601-606
Author(s):  
Xiao Chuan Liu ◽  
Shi Xing Zhu ◽  
Yong Gang Yang
Keyword(s):  
Shock Absorber ◽  
Magnetic Circuit ◽  
Mr Damper ◽  
Magnetorheological Damper ◽  
Damping Force ◽  
Damping Characteristics ◽  
Aircraft Landing ◽  
Piston Displacement ◽  
Drop Tests ◽  
Better Than

The structure of a shock absorber based on magnetorheological (MR) damper with a metering pin is proposed, and structure of the magnetic circuit of MR damper is optimized. By drop tests, the damping characteristics of the shock absorber and damping effect are tested. The experimental results show that the shock absorber has the characteristic of a wide damping force adjustment range and lower energy dissipation. The maximum vertical load and shock absorber piston displacement can be changed at same drop height by changing the current. It has also been proved that shock absorber based on MR damper is better than conventional oleo-pneumatic shock absorber on adjustment of damping force.

Effect of Cylinder Diameter of Monotube-Type MR-Damper on the Damping Force Changing Ratio and the Response Time

2011 ◽  
Author(s):  
Hajime Komatsu ◽  
Hiroshi Enomoto ◽  
Toshihiko Komatsuzaki ◽  
Kohei Izumi
Keyword(s):  
Response Time ◽  
Mr Damper ◽  
Damping Force ◽  
Cylinder Diameter
Sign in / Sign up

Export Citation Format

Share Document