scholarly journals Highly scalable numerical simulation of coupled reaction–Diffusion systems with moving interfaces

Author(s):  
Mojtaba Barzegari ◽  
Liesbet Geris

A combination of reaction–diffusion models with moving-boundary problems yields a system in which the diffusion (spreading and penetration) and reaction (transformation) evolve the system’s state and geometry over time. These systems can be used in a wide range of engineering applications. In this study, as an example of such a system, the degradation of metallic materials is investigated. A mathematical model is constructed of the diffusion-reaction processes and the movement of corrosion front of a magnesium block floating in a chemical solution. The corresponding parallelized computational model is implemented using the finite element method, and the weak and strong-scaling behaviors of the model are evaluated to analyze the performance and efficiency of the employed high-performance computing techniques.

2002 ◽  
Vol 7 (1) ◽  
pp. 27-40 ◽  
Author(s):  
Victor Kardashov ◽  
Shmuel Einav

This paper has considered a novel approach to structural recognition and control of nonlinear reaction-diffusion systems (systems with density dependent diffusion). The main consistence of the approach is interactive variation of the nonlinear diffusion and sources structural parameters that allows to implement a qualitative control and recognition of transitional system conditions (transients). The method of inverse solutions construction allows formulating the new analytic conditions of compactness and periodicity of the transients that is also available for nonintegrated systems. On the other hand, using of energy conservations laws, allows transfer to nonlinear dynamics models that gives the possiblity to apply the modern deterministic chaos theory (particularly the Feigenboum's universal constants and scenario of chaotic transitions).


Author(s):  
Houye Liu ◽  
Weiming Wang

Amplitude equation may be used to study pattern formatio. In this chapter, we establish a new mechanical algorithm AE_Hopf for calculating the amplitude equation near Hopf bifurcation based on the method of normal form approach in Maple. The normal form approach needs a large number of variables and intricate calculations. As a result, deriving the amplitude equation from diffusion-reaction is a difficult task. Making use of our mechanical algorithm, we derived the amplitude equations from several biology and physics models. The results indicate that the algorithm is easy to apply and effective. This algorithm may be useful for learning the dynamics of pattern formation of reaction-diffusion systems in future studies.


2019 ◽  
Author(s):  
Satya N. V. Arjunan ◽  
Atsushi Miyauchi ◽  
Kazunari Iwamoto ◽  
Koichi Takahashi

ABSTRACTBackgroundStudies using quantitative experimental methods have shown that intracellular spatial distribution of molecules plays a central role in many cellular systems. Spatially resolved computer simulations can integrate quantitative data from these experiments to construct physically accurate models of the systems. Although computationally expensive, microscopic resolution reaction-diffusion simulators, such as Spatiocyte can directly capture intracellular effects comprising diffusion-limited reactions and volume exclusion from crowded molecules by explicitly representing individual diffusing molecules in space. To alleviate the steep computational cost typically associated with the simulation of large or crowded intracellular compartments, we present a parallelized Spatiocyte method called pSpatiocyte.ResultsThe new high-performance method employs unique parallelization schemes on hexagonal close-packed (HCP) lattice to efficiently exploit the resources of common workstations and large distributed memory parallel computers. We introduce a coordinate system for fast accesses to HCP lattice voxels, a parallelized event scheduler, a parallelized Gillespie’s direct-method for unimolecular reactions, and a parallelized event for diffusion and bimolecular reaction processes. We verified the correctness of pSpatiocyte reaction and diffusion processes by comparison to theory. To evaluate the performance of pSpatiocyte, we performed a series of parallelized diffusion runs on the RIKEN K computer. In the case of fine lattice discretization with low voxel occupancy, pSpatiocyte exhibited 74% parallel efficiency and achieved a speedup of 7686 times with 663552 cores compared to the runtime with 64 cores. In the weak scaling performance, pSpatiocyte obtained efficiencies of at least 60% with up to 663552 cores. When executing the Michaelis-Menten benchmark model on an eight-core workstation, pSpatiocyte required 45- and 55-fold shorter runtimes than Smoldyn and the parallel version of ReaDDy, respectively. As a high-performance application example, we study the dual phosphorylation-dephosphorylation cycle of the MAPK system, a typical reaction network motif in cell signaling pathways.ConclusionspSpatiocyte demonstrates good accuracies, fast runtimes and a significant performance advantage over well-known microscopic particle simulators for large-scale simulations of intracellular reaction-diffusion systems. The source code of pSpatiocyte is available at https://spatiocyte.org.


Author(s):  
Houye Liu ◽  
Weiming Wang

Amplitude equation may be used to study pattern formatio. In this article, the authors establish a new mechanical algorithm AE_Hopf for calculating the amplitude equation near Hopf bifurcation based on the method of normal form approach in Maple. The normal form approach needs a large number of variables and intricate calculations. As a result, deriving the amplitude equation from diffusion-reaction is a difficult task. Making use of our mechanical algorithm, we derived the amplitude equations from several biology and physics models. The results indicate that the algorithm is easy to apply and effective. This algorithm may be useful for learning the dynamics of pattern formation of reaction-diffusion systems in future studies.


2004 ◽  
Vol 97-98 ◽  
pp. 125-132 ◽  
Author(s):  
George Varghese ◽  
Jacob George

Periodic precipitation pattern formation in reaction diffusion systems is interpreted as a moving boundary problem. All the existing laws are reexamined on the basis of the moving boundary assumption. Experimental observations were found to be in good agreement with the new equations suggested.


2018 ◽  
Vol 5 (8) ◽  
pp. 180920 ◽  
Author(s):  
Cameron A. Smith ◽  
Christian A. Yates

Reaction–diffusion systems are used to represent many biological and physical phenomena. They model the random motion of particles (diffusion) and interactions between them (reactions). Such systems can be modelled at multiple scales with varying degrees of accuracy and computational efficiency. When representing genuinely multiscale phenomena, fine-scale models can be prohibitively expensive, whereas coarser models, although cheaper, often lack sufficient detail to accurately represent the phenomenon at hand. Spatial hybrid methods couple two or more of these representations in order to improve efficiency without compromising accuracy. In this paper, we present a novel spatial hybrid method, which we call the auxiliary region method (ARM), which couples PDE- and Brownian-based representations of reaction–diffusion systems. Numerical PDE solutions on one side of an interface are coupled to Brownian-based dynamics on the other side using compartment-based ‘auxiliary regions’. We demonstrate that the hybrid method is able to simulate reaction–diffusion dynamics for a number of different test problems with high accuracy. Furthermore, we undertake error analysis on the ARM which demonstrates that it is robust to changes in the free parameters in the model, where previous coupling algorithms are not. In particular, we envisage that the method will be applicable for a wide range of spatial multi-scales problems including filopodial dynamics, intracellular signalling, embryogenesis and travelling wave phenomena.


Author(s):  
E. Logak

We consider two model reaction-diffusion systems of bistable type arising in the theory of phase transition; they appear in various physical contexts, such as thin magnetic films and diblock copolymers. We prove the convergence of the solution of these systems to the solution of free-boundary problems involving modified motion by mean curvature.


1984 ◽  
Vol 27 (2) ◽  
pp. 131-144 ◽  
Author(s):  
Anthony W. Leung

In many biological diffusion-reaction studies, it was found that one should include the effect of density dependent rates, drift terms and spatially varying growth rates, in order to obtain more accurate results. (See e.g. [7],[10], [8] , [3]). On the other hand, many recent mathematical results on reaction-diffusion systems do not include such general setting. This article investigates the behaviour of competing-species reaction-diffusion model under this more general situation. Efforts are made to obtain results concerning coexistence, survival and extinction, by methods similar to that in [5], [6].


2020 ◽  
Vol 21 (1) ◽  
Author(s):  
Satya N.V. Arjunan ◽  
Atsushi Miyauchi ◽  
Kazunari Iwamoto ◽  
Koichi Takahashi

2006 ◽  
Vol 16 (12) ◽  
pp. 3679-3685 ◽  
Author(s):  
ANDREEA MUNTEANU ◽  
RICARD V. SOLÉ

Among reaction–diffusion systems showing Turing patterns, the diffusive Gray–Scott model [Pearson, 1993], stands out by showing self-replicating patterns (spots), which makes it the ideal simple model for developmental research. A first study of the influence of noise in the Gray–Scott model was performed by Lesmes et al. [2003] concluding that there exists an optimal noise intensity for which spot multiplication is maximal. Here we show in detail the transition from nonspotlike to spotlike pattern, with the identification of a wide range of noise intensities instead of an optimal value for which this transition occurs. Additional studies also reveal that noise produces a shift and a shrinkage of the regions of spatial patterns in the parameters space, without introducing qualitative changes to the diagram.


Sign in / Sign up

Export Citation Format

Share Document