High-temperature wettability study of mineral waste added CaO–CaF2–SiO2 and CaO–TiO2–SiO2-based electrode coating for offshore welds

2020 ◽  
Vol 234 (4) ◽  
pp. 622-636
Author(s):  
Waris Nawaz Khan ◽  
Jagdish Kumar ◽  
Rahul Chhibber
Keyword(s):  
High Temperature ◽  
Design Method ◽  
X Ray Diffraction ◽  
Electrode Coating ◽  
X Ray ◽  
Molten Flux ◽  
Multiresponse Optimization ◽  
Flux Composition ◽  
Coating Mixture ◽  
Mineral Waste

This paper investigates the high-temperature wettability property of the mineral waste red ochre added CaO–CaF2–SiO2 and CaO–TiO2–SiO2-based electrode coating mixture for offshore welding. The extreme vertices design method was applied to formulate 21 coating compositions. The pellets made from developed electrode coating compositions were exposed to a high temperature of 1250℃ on the substrate of super duplex stainless steel of 2507 grade. The molten flux has been characterized for contact angle, surface tension, adhesion energy and spreadability. The regression analysis has been used to estimate the effect of individual components and their interactions on the wettability property parameters. The developed regression models have been optimized using multiresponse optimization to achieve optimum flux composition. Structural analysis of flux mixture has been done using X-ray diffraction and Fourier transformation spectroscopy.

High temperature X-ray diffraction investigation of an aluminium-silicon-corundum system

2007 ◽  
Vol 2007 (suppl_26) ◽  
pp. 369-374 ◽  
Author(s):  
D. Garipoli ◽  
P. Bergese ◽  
E. Bontempi ◽  
M. Minicucci ◽  
A. Di Cicco ◽  
...  
Keyword(s):  
High Temperature ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals High-pressure synthesis and crystal structure of the mixed-cation borate Ga4In4B15O33(OH)3

2019 ◽  
Vol 74 (4) ◽  
pp. 357-363
Author(s):  
Daniela Vitzthum ◽  
Hubert Huppertz
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
High Temperature ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Synthesis And Crystal Structure ◽  
X Ray ◽  
Mixed Cation ◽  
High Pressure High Temperature ◽  
Pressure Synthesis

AbstractThe mixed cation triel borate Ga4In4B15O33(OH)3 was synthesized in a Walker-type multianvil apparatus at high-pressure/high-temperature conditions of 12.5 GPa and 1300°C. Although the product could not be reproduced in further experiments, its crystal structure could be reliably determined via single-crystal X-ray diffraction data. Ga4In4B15O33(OH)3 crystallizes in the tetragonal space group I41/a (origin choice 2) with the lattice parameters a = 11.382(2), c = 15.244(2) Å, and V = 1974.9(4) Å3. The structure of the quaternary triel borate consists of a complex network of BO4 tetrahedra, edge-sharing InO6 octahedra in dinuclear units, and very dense edge-sharing GaO6 octahedra in tetranuclear units.

The Application of X-Ray Diffraction at Elevated Temperatures to Study the Mechanism of Formation of Sodium Tripolyphosphate

1961 ◽  
Vol 5 ◽  
pp. 276-284
Author(s):  
E. L. Moore ◽  
J. S. Metcalf
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Amorphous Phase ◽  
Elevated Temperatures ◽  
Sodium Tripolyphosphate ◽  
X Ray Diffraction ◽  
Mechanism Of Formation ◽  
X Ray ◽  
Temperature Form ◽  
High Temperature Form

AbstractHigh-temperature X-ray diffraction techniques were employed to study the condensation reactions which occur when sodium orthophosphates are heated to 380°C. Crystalline Na4P2O7 and an amorphous phase were formed first from an equimolar mixture of Na2HPO4·NaH2PO4 and Na2HPO4 at temperatures above 150°C. Further heating resulted in the formation of Na5P3O10-I (high-temperature form) at the expense of the crystalline Na4P4O7 and amorphous phase. Crystalline Na5P3O10-II (low-temperature form) appears after Na5P3O10-I.Conditions which affect the yield of crystalline Na4P2O7 and amorphous phase as intermediates and their effect on the yield of Na5P3O10 are also presented.

Mechanical Alloying Behavior in the Nb-Si, Ta-Si, and Nb-Ta-Si Systems

1988 ◽  
Vol 133 ◽  
Author(s):  
K. S. Kumar ◽  
S. K. Mannan
Keyword(s):  
High Temperature ◽  
Mechanical Alloying ◽  
Mechanical Milling ◽  
Room Temperature ◽  
Crystalline Compound ◽  
X Ray Diffraction ◽  
X Ray ◽  
Β Phase ◽  
Α Phase

ABSTRACTThe mechanical alloying behavior of elemental powders in the Nb-Si, Ta-Si, and Nb-Ta-Si systems was examined via X-ray diffraction. The line compounds NbSi2 and TaSi2 form as crystalline compounds rather than amorphous products, but Nb5Si3 and Ta5Si3, although chemically analogous, respond very differently to mechanical milling. The Ta5Si3 composition goes directly from elemental powders to an amorphous product, whereas Nb5Si3 forms as a crystalline compound. The Nb5Si3 compound consists of both the tetragonal room-temperature α phase (c/a = 1.8) and the tetragonal high-temperature β phase (c/a = 0.5). Substituting increasing amounts of Ta for Nb in Nb5Si3 initially stabilizes the α-Nb5Si3 structure preferentially, and subsequently inhibits the formation of a crystalline compound.

scholarly journals X-ray diffraction analysis of kaolin M1 and M2 via the Williamson–Hall and Warren–Averbach methods

2021 ◽  
pp. 174751982098472
Author(s):  
Lalmi Khier ◽  
Lakel Abdelghani ◽  
Belahssen Okba ◽  
Djamel Maouche ◽  
Lakel Said
Keyword(s):  
Grain Size ◽  
High Temperature ◽  
Low Temperature ◽  
Diffraction Analysis ◽  
Mechanical Resistance ◽  
X Ray Diffraction ◽  
Integral Breadth ◽  
X Ray ◽  
Mullite Phase

Kaolin M1 and M2 studied by X-ray diffraction focus on the mullite phase, which is the main phase present in both products. The Williamson–Hall and Warren–Averbach methods for determining the crystallite size and microstrains of integral breadth β are calculated by the FullProf program. The integral breadth ( β) is a mixture resulting from the microstrains and size effect, so this should be taken into account during the calculation. The Williamson–Hall chart determines whether the sample is affected by grain size or microstrain. It appears very clearly that the principal phase of the various sintered kaolins, mullite, is free from internal microstrains. It is the case of the mixtures fritted at low temperature (1200 °C) during 1 h and also the case of the mixtures of the type chamotte cooks with 1350 °C during very long times (several weeks). This result is very significant as it gives an element of explanation to a very significant quality of mullite: its mechanical resistance during uses at high temperature remains.

scholarly journals High-pressure synthesis and characterization of the non-centrosymmetric scandium borate ScB6O9(OH)3

2020 ◽  
Vol 75 (6-7) ◽  
pp. 597-603
Author(s):  
Birgit Fuchs ◽  
Hubert Huppertz
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Pressure High Temperature ◽  
Structure Solution ◽  
Temperature Experiment ◽  
Pressure Synthesis

AbstractThe non-centrosymmetric scandium borate ScB6O9(OH)3 was obtained through a high-pressure/high-temperature experiment at 6 GPa and 1473 K. Single-crystal X-ray diffraction revealed that the structure is isotypic to InB6O9(OH)3 containing borate triple layers separated by scandium layers. The compound crystallizes in the space group Fdd2 with the lattice parameters a = 38.935(4), b = 4.4136(4), and c = 7.6342(6) Å. Powder X-ray diffraction and vibrational spectroscopy were used to further characterize the compound and verify the proposed structure solution.

Sign in / Sign up

Export Citation Format

Share Document