Mechanical, chemical and sound absorption properties of glass/kenaf/waste tea leaf fiber-reinforced hybrid epoxy composites

2020 ◽  
pp. 152808372095739 ◽  
Author(s):  
L Prabhu ◽  
V Krishnaraj ◽  
S Gokulkumar ◽  
S Sathish ◽  
MR Sanjay ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Hybrid Composites ◽  
Experimental Studies ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Waste Tea ◽  
Kenaf Fibers ◽  
Tea Leaf ◽  
Absorption Characteristics ◽  
Leaf Fiber

This work aims to investigate the mechanical and sound absorption characteristics of industrial waste tea leaf fiber (WTLF), kenaf and E-glass fiber–reinforced hybrid epoxy composites through experimental studies. The WTLF and kenaf fibers were initially treated with 5% sodium hydroxide. Hybrid composites were fabricated by compression molding technique with a composition of 40 wt.% fiber and 60 wt.% matrix. The fabricated hybrid composites were subjected to mechanical and sound absorption studies as per ASTM standards. Results revealed better mechanical properties in the composites with 25 wt.% kenaf and 5 wt.% WTLF, whereas sound absorption characteristics were better for composites containing 25 wt.% WTLF and 5 wt.% kenaf fiber. The surface morphology of the fractured specimens such as fiber pullout and matrix crack was examined using scanning electron microscopy. Spectrum investigation of alkali-treated hybrid composites showed excellent interfacial bonding between the polymer and fiber compared to the untreated fiber.

scholarly journals Influence of layering pattern of modified kenaf fiber on thermomechanical properties of epoxy composites

2019 ◽  
Vol 36 (1) ◽  
pp. 47-62
Author(s):  
AR Mohammed ◽  
MS Nurul Atiqah ◽  
Deepu A Gopakumar ◽  
MR Fazita ◽  
Samsul Rizal ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Chemical Modification ◽  
Epoxy Matrix ◽  
Epoxy Composites ◽  
Woven Composites ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Kenaf Fibers ◽  
The Impact ◽  
Woven Kenaf

Natural fiber-reinforced composites gained considerable interest in the scientific community due to their eco-friendly nature, cost-effective, and excellent mechanical properties. Here, we reported a chemical modification of kenaf fiber using propionic anhydride to enhance the compatibility with the epoxy matrix. The incorporation of the modified woven and nonwoven kenaf fibers into the epoxy matrix resulted in the improvement of the thermal and mechanical properties of the composite. The thermal stability of the epoxy composites was enhanced from 403°C to 677°C by incorporating modified woven kenaf fibers into the epoxy matrix. The modified and unmodified woven kenaf fiber-reinforced epoxy composites had a tensile strength of 64.11 and 58.82 MPa, respectively. The modified woven composites had highest flexural strength, which was 89.4 MPa, whereas, for unmodified composites, it was 86.8 MPa. The modified woven fiber-reinforced epoxy composites showed the highest value of flexural modulus, which was 6.0 GPa compared to unmodified woven composites (5.51 GPa). The impact strength of the epoxy composites was enhanced to 9.43 kJ m−2 by the incarnation of modified woven kenaf fibers into epoxy matrix. This study will be an effective platform to design the chemical modification strategy on natural fibers for enhancing the compatibility toward the hydrophobic polymer matrices.

Influence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide filler

2017 ◽  
Vol 51 (28) ◽  
pp. 3909-3922 ◽  
Author(s):  
Priyadarshi Tapas Ranjan Swain ◽  
Sandhyarani Biswas
Keyword(s):  
Water Absorption ◽  
Benzoyl Chloride ◽  
Moisture Absorption ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Aluminium Oxide ◽  
Fiber Surface ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Chemically Treated

The present paper discovers the effect of ceramic filler inclusion on physico-mechanical and water absorption behaviour of untreated and chemically treated (alkali and benzoyl chloride treated) bi-directional jute natural-fiber-reinforced epoxy composites. In practice, the major drawbacks of using natural fibers are their high degree of moisture absorption and poor dimensional stability. Currently, chemical treatments are able to induce fiber modifications that increase their resistance when utilized in composite products. Jute fibers were subjected to various chemical modifications to improve the interfacial bonding with the matrix. In this study, an analysis has been carried out to make pre-treated jute fiber (10, 20, 30 and 40 wt.%) and different filler content (5 and 10 wt.%) with epoxy-based composites. A comparative study of all the untreated jute/aluminium oxide based hybrid composites with chemically treated jute/aluminium oxide based hybrid composites was carried out. The investigational result reveals that chemically treated composites considerably improved the mechanical properties of the composite. The maximum water absorption resistance and strength properties were found with benzoyl chloride-treated fiber-reinforced composite. Lastly, the surface morphology of fractured surfaces after tensile and flexural testing is studied using scanning electron microscope.

scholarly journals Effect of fiber content and their hybridization on bending and torsional strength of hybrid epoxy composites reinforced with carbon and sugar palm fibers

Polimery ◽  
2021 ◽  
Vol 66 (1) ◽  
pp. 36-43 ◽  
Author(s):  
N. M. Z. Nik Baihaqi ◽  
A. Khalina ◽  
N. Mohd Nurazzi ◽  
H. A. Aisyah ◽  
S. M. Sapuan ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Torsion Test ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Loading ◽  
The Matrix ◽  
Carbon Fiber Reinforced Composites ◽  
Carbon Fiber Reinforced

This study aims to investigate the effect of fiber hybridization of sugar palm yarn fiber with carbon fiber reinforced epoxy composites. In this work, sugar palm yarn composites were reinforced with epoxy at varying fiber loads of 5, 10, 15, and 20 wt % using the hand lay-up process. The hybrid composites were fabricated from two types of fabric: sugar palm yarn of 250 tex and carbon fiber as the reinforcements, and epoxy resin as the matrix. The ratios of 85 : 15 and 80 : 20 were selected for the ratio between the matrix and reinforcement in the hybrid composite. The ratios of 50 : 50 and 60 : 40 were selected for the ratio between sugar palm yarn and carbon fiber. The mechanical properties of the composites were characterized according to the flexural test (ASTM D790) and torsion test (ASTM D5279). It was found that the increasing flexural and torsion properties of the non-hybrid composite at fiber loading of 15 wt % were 7.40% and 75.61%, respectively, compared to other fiber loading composites. For hybrid composites, the experimental results reveal that the highest flexural and torsion properties were achieved at the ratio of 85/15 reinforcement and 60/40 for the fiber ratio of hybrid sugar palm yarn/carbon fiber-reinforced composites. The results from this study suggest that the hybrid composite has a better performance regarding both flexural and torsion properties. The different ratio between matrix and reinforcement has a significant effect on the performance of sugar palm composites. It can be concluded that this type of composite can be utilized for beam, construction applications, and automotive components that demand high flexural strength and high torsional forces.

scholarly journals Investigation on Physical and Mechanical Properties of Banana and Palmyra Fiber Reinforced Epoxy Composites

2020 ◽  
Vol 70 (2) ◽  
pp. 167-180
Author(s):  
Vennapusa Vijaya Bhaskar ◽  
Kolla Srinivas ◽  
Devireddy Siva Bhaskara Rao
Keyword(s):  
Mechanical Properties ◽  
Hybrid Composites ◽  
Matrix Material ◽  
Weight Ratio ◽  
Physical And Mechanical Properties ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Micro Structure ◽  
Interfacial Analysis ◽  
The Matrix

AbstractThe present work addresses the physical and mechanical properties of banana and palmyra fiber reinforced epoxy composites with the aim of study on the effect of weight ratio and fiber percentage. The banana and palmyra fibers were arranged with different weight ratios (1:1, 1:3, and 3:1) and then mixed with the epoxy matrix by hand lay-up technique to prepare the hybrid composites with various fiber percentages (10%, 20%, 30% and 40%). The properties are measured by testing its density, water absorption, tensile strength, impact strength, hardness and flexural strength and compared. From the results, it was indicated that addition of banana and palmyra fiber in to the matrix material up to 30% by fiber percentage results in increasing the mechanical properties and slightly variation with weight ratios. Interfacial analysis of the hybrid composites were also observed by using scanning electron microscope (SEM) to study the internal failures and micro structure of the tested specimen.

scholarly journals Development and Testing of Pine Apple and Glass Fiber Reinforced Epoxy Hybrid Composites

2019 ◽  
Vol 8 (3) ◽  
pp. 2450-2453
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Natural Fiber ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Fiber Composites ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Synthetic Fibers ◽  
Glass Fiber Reinforced

Usage of Natural Fiber Composites (NFC) is increased rapidly due to the bio degradability nature of the fibers. These natural fibers are mixed with synthetic fibers to obtain better mechanical properties. In this study, pine apple and glass fiber reinforced epoxy composites are developed and their mechanical properties were evaluated. Composites were prepared by varying the fibers content and by using hand layup process with glass moulds of size 160 x 160 x 3 mm3 . The obtained laminates were sliced as per the ASTM criterion to test the properties. Higher glass fiber content in the composite specimen obtained higher mechanical properties. The composites can be utilized for the purpose of manufacturing components like doors panels, desks, roof tops etc.

Mechanical properties and water absorption of kenaf/pineapple leaf fiber‐reinforced polypropylene hybrid composites

2020 ◽  
Vol 41 (4) ◽  
pp. 1255-1264 ◽  
Author(s):  
Ng Lin Feng ◽  
Sivakumar Dhar Malingam ◽  
Chen Wei Ping ◽  
Nadlene Razali
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Hybrid Composites ◽  
Fiber Reinforced ◽  
Pineapple Leaf Fiber ◽  
Leaf Fiber

Impact of silane treatment on the dielectric properties of pineapple leaf/kenaf fiber reinforced phenolic composites

2019 ◽  
Vol 54 (7) ◽  
pp. 937-946 ◽  
Author(s):  
F Agrebi ◽  
H Hammami ◽  
M Asim ◽  
M Jawaid ◽  
A Kallel
Keyword(s):  
Dielectric Properties ◽  
Interfacial Adhesion ◽  
Hybrid Composites ◽  
Silane Treatment ◽  
Dielectric Relaxation Spectroscopy ◽  
Fiber Reinforced ◽  
Kenaf Fiber ◽  
Pineapple Leaf Fiber ◽  
Fiber Matrix ◽  
Leaf Fiber

This work deals with the dielectric properties of silane treated pineapple leaf fiber and kenaf fiber reinforced phenolic hybrid composites. The aim of the present paper is to investigate the effect of silane treatment on the pineapple leaf fiber–kenaf fiber/matrix interfacial adhesion using the dielectric relaxation spectroscopy in the frequency range from 0.1 Hz to 1 MHz and temperature range from 50 to 180℃. Our hybrid composites were fabricated by hand lay-up method at 50% total fiber loading. All the results obtained were discussed in terms of dynamic molecular and interfacial process. Two interfacial polarizations identified as the Maxwell–Wagner–Sillars effect are observed. We note that silane treatment improved the interfacial adhesion between pineapple leaf fiber/kenaf fiber and phenolic resin and it will help to develop high performance kenaf fiber/pineapple leaf fiber reinforced polymer composites for industrial applications. In fact, as known, the silane treatment developed hydrophobic nature in pineapple leaf fiber and kenaf fiber which is very positive for fiber/matrix compatibility.

Dielectric Properties of Pineapple Leaf Fiber Reinforced Epoxy Based Composites

2017 ◽  
Vol 730 ◽  
pp. 42-47 ◽  
Author(s):  
Elammaran Jayamani ◽  
Soon Kok Heng ◽  
Muhammad Khusairy bin Bakri
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Sodium Hydroxide ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Concentration ◽  
Fiber Loading ◽  
Pineapple Leaf Fiber ◽  
Sodium Hydroxide Treatment ◽  
Leaf Fiber

The present study investigates the dielectric constant, loss factor and dissipation factor of pineapple leaf fiber reinforced epoxy composites as in function of fiber loading, fiber surface modification and frequency. The dielectric properties of the composites were measured using HP 16451 as the dielectric test fixture and was carried out on pineapple leaf fiber reinforced epoxy composites with varying fiber loading (5wt%, 10wt%, 15wt%, and 20wt%) and fiber subjected to sodium hydroxide treatment. It was observed that the dielectric properties of these composites were influenced by fiber loading and sodium hydroxide treatment. The dielectric constant increases with increase of fiber concentration and decrease with the increase of frequency in the case of all composites. It was also observed that the increase of dielectric constant with fiber loading was more significant at low frequency. Due to a reduction in the hydrophilic nature of pineapple leaf fiber brought about by sodium hydroxide treatment the dielectric properties of the composites was less than that of the untreated ones.

Sign in / Sign up

Export Citation Format

Share Document