scholarly journals Performance prediction of loop-type wind turbine

2020 ◽  
Vol 12 (2) ◽  
pp. 168781401984047
Author(s):  
Wonyoung Jeon ◽  
Jeanho Park ◽  
Seungro Lee ◽  
Youngguan Jung ◽  
Yeesock Kim ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Experimental Results ◽  
Scale Model ◽  
Dynamics Analysis ◽  
Blockage Ratio ◽  
Horizontal Axis Wind Turbine ◽  
Computational Fluid Dynamics Analysis

An experimental and analytical method to evaluate the performance of a loop-type wind turbine generator is presented. The loop-type wind turbine is a horizontal axis wind turbine with a different shaped blade. A computational fluid dynamics analysis and experimental studies were conducted in this study to validate the performance of the computational fluid dynamics method, when compared with the experimental results obtained for a 1/15 scale model of a 3 kW wind turbine. Furthermore, the performance of a full sized wind turbine is predicted. The computational fluid dynamics analysis revealed a sufficiently large magnitude of external flow field, indicating that no factor influences the flow other than the turbine. However, the experimental results indicated that the wall surface of the wind tunnel significantly affects the flow, due to the limited cross-sectional size of the wind tunnel used in the tunnel test. The turbine power is overestimated when the blockage ratio is high; thus, the results must be corrected by defining the appropriate blockage factor (the factor that corrects the blockage ratio). The turbine performance was corrected using the Bahaj method. The simulation results showed good agreement with the experimental results. The performance of an actual 3 kW wind turbine was also predicted by computational fluid dynamics.

scholarly journals Bio-Inspired Rotor Design Characterization of a Horizontal Axis Wind Turbine

Energies ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3515
Author(s):  
J. Gaitan-Aroca ◽  
Fabio Sierra ◽  
Jose Ulises Castellanos Contreras
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Numerical Analysis ◽  
Wind Turbine ◽  
Horizontal Axis ◽  
Experimental Results ◽  
Power Coefficient ◽  
Horizontal Axis Wind Turbine ◽  
Thrust Coefficient ◽  
Rotor Design

In this paper, the performance of a biomimetic wind rotor design inspired by Petrea Volubilis seed is presented. Experimentation for this rotor is configured as a horizontal axis wind turbine (HAWT) and numerical analysis is done in order to obtain performance curves with the open-source computational fluid dynamics (CFD) software OpenFoam®. Numerical analysis and experimental results are compared for power Coefficient (Cp) and thrust coefficient (CT). The biomimetic rotor analysis is also compared with experimental results exposed by Castañeda et al. (2011), who were the first to develop those experimentations with this new rotor design. Computational fluid dynamics simulations were performed using an incompressible large Edyy simulation (LES) turbulence models with a localized sub-grid scale (SGS) dynamic one-equation eddy-viscosity. A dynamic mesh based on an arbitrary mesh interface (AMI) was used to simulate rotation and to evaluate flow around rotor blades in order to accurately capture the flow field behavior and to obtain global variables that allow to determine the power potential of this wind rotor turbine. This study will show the potential of this new rotor design for wind power generation.

Computational Fluid Dynamics Study of a Small Vertical Axis Wind Turbine with Ball-Shaped Blades

2011 ◽  
Vol 347-353 ◽  
pp. 319-322
Author(s):  
Zu Peng Zhou ◽  
Qiu Yun Mo ◽  
Zhi Peng Lei
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Power Efficiency ◽  
Vertical Axis ◽  
Curvature Radius ◽  
Dynamics Analysis ◽  
Vertical Axis Wind Turbine ◽  
Computational Fluid Dynamics Analysis ◽  
Simulation Results

The computational fluid dynamics analysis of a small vertical axis wind turbine with ball-shaped blades has been done in this paper. First, a three-dimensioned model of the wind turbine with the ball-shaped blades has been constructed by using the software of FLUENT 6.3. Then, by giving the size parameters and shape parameters of the blades, the simulation has been done and the corresponding simulation results have been obtained. The contuours of static pressure around the wind blade area has been shown. The simulated model and the results can be used for finding the factors which will affect the power efficiency of this type of wind turbine in the future. Finally, the simulation results of the blade with zero curvature radius and curvature radius of 2 are shown and compared in order to demonstrate the effectiveness of this computational fluid dynamics analysis method. It can be concluded that the blades with curvature of 2 can obtain more toruqe comparing with the zero one and it would be the more suitable option in the blade design.

A 3D Computational Fluid Dynamics Analysis of the Wells Turbine

2002 ◽  
Author(s):  
John Daly ◽  
Ajit Thakker ◽  
Patrick Frawley ◽  
Elvis Sheik Bajeet
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Mach Number ◽  
Computational Model ◽  
Experimental Results ◽  
Dynamics Analysis ◽  
Cfd Model ◽  
Wells Turbine ◽  
Computational Fluid Dynamics Analysis ◽  
Computational Fluid Dynamics Cfd

This paper deals with the application of Computational Fluid Dynamics (CFD) to the turbulent analysis of the Wells Turbine. The objectives of this work were twofold; firstly to develop and benchmark the 3D CFD model and then to use this model to analyse the airflow through the turbine. The model was analysed as fully turbulent compressible flow using the Fluent™ CFD code. The computational model was first benchmarked against previously published experimental and CFD data for two similar turbines. The computational model accurately predicted the non-dimensional torque and non-dimensional pressure drop, while the efficiency predictions were lower than the experimental results. Predicted location of turbine stall also corresponded well with experimental results. Potential causes for differences between the computational and experimental results are suggested. The computational model was then analysed at both high and low tip Mach number settings and also with and without the tip gap, and these results were discussed.

scholarly journals About the suitability of different numerical methods to reproduce model wind turbine measurements in a wind tunnel with a high blockage ratio

2018 ◽  
Vol 3 (1) ◽  
pp. 439-460 ◽  
Author(s):  
Annette Claudia Klein ◽  
Sirko Bartholomay ◽  
David Marten ◽  
Thorsten Lutz ◽  
George Pechlivanoglou ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Far Field ◽  
Vortex Wake ◽  
Blockage Ratio ◽  
Bending Moments ◽  
Free Vortex ◽  
Lifting Line

Abstract. In the present paper, numerical and experimental investigations of a model wind turbine with a diameter of 3.0 m are described. The study has three objectives. The first one is the provision of validation data. The second one is to estimate the influence of the wind tunnel walls by comparing measurements to simulated results with and without wind tunnel walls. The last objective is the comparison and evaluation of methods of high fidelity, namely computational fluid dynamics, and medium fidelity, namely lifting-line free vortex wake. The experiments were carried out in the large wind tunnel of the TU Berlin where a blockage ratio of 40 % occurs. With the lifting-line free vortex wake code QBlade, the turbine was simulated under far field conditions at the TU Berlin. Unsteady Reynolds-averaged Navier–Stokes simulations of the wind turbine, including wind tunnel walls and under far field conditions, were performed at the University of Stuttgart with the computational fluid dynamics code FLOWer. Comparisons among the experiment, the lifting-line free vortex wake code and the computational fluid dynamics code include on-blade velocity and angle of attack. Comparisons of flow fields are drawn between the experiment and the computational fluid dynamics code. Bending moments are compared among the simulations. A good accordance was achieved for the on-blade velocity and the angle of attack, whereas deviations occur for the flow fields and the bending moments.

Sign in / Sign up

Export Citation Format

Share Document