scholarly journals Copper(I) Chloride/Kieselguhr: A Versatile Catalyst for Oxidation of Alkyl Halides and Alkyl Tosylates to the Carbonyl Compounds

1999 ◽  
Vol 23 (7) ◽  
pp. 434-435
Author(s):  
Mohammed M. Hashemi ◽  
Yousef Ahmadi Beni

Copper(I) Chloride adsorbed on Kieselguhr in the presence of oxygen catalyses oxidation of alkyl halides and alkyl tosylates to the aldehydes and ketones in high yields.

2018 ◽  
Vol 9 (1) ◽  
Author(s):  
Azar Mostoufi ◽  
Mohammad Reza Shushizadeh ◽  
Aedeh Sayahi ◽  
Seyed Mohammad Bagher Nabavi ◽  
Bahar Mohandespour

A new and efficient method have been developed for the synthesis of α,β-unsaturated carbonyl compounds from various aldehydes and ketones, using marine calcinated coral/NaNO3 and cuttlebone/NaNO3, as natural and efficient catalysts for cross aldol condensation. The aim of present study was to study the marine solids/NaNO3: as natural and efficient catalyst for Aldol condensation. The materials were purchased from Merck and Aldrich Companies. The IR spectra were recorded on a Perkin-Elmer RXI infrared spectrometer. H NMR spectra were recorded on a 400 MHz Brucker FT-NMR spectrometer. The SEM image was recorded on 1455 VP LEO-Germany. TLC accomplished the purity of substrates and reactions monitored on silica gel (Merck, Germany) Polygram SIGL/UV254 plates. The melting points are uncorrected. Results showed that, the marine solid are efficient catalysts for aldol condensation, but cuttlebone/NaNO3 catalyze this reaction in shorter time (1 hr) than calcinated coral/NaNO3 (6 hr). However, these marine solids have several advantages such as small amount of the catalyst, good absorbent natural solid, easy to handle, and products in good-to-high yields. In conclusion we found marine catalysts, Calcinated Cuttlebone/NaNO3 or Coral/NaNO3 to be an effective catalyst for aldol condensation from ketones having α-hydrogens and aldehydes in 50 % ethanol at reflux conditions. The α,β-unsaturated carbonyl products were obtained in good to high yields. This method offered marked improvement compared to previously reported ones.


2005 ◽  
Vol 83 (10) ◽  
pp. 1741-1745 ◽  
Author(s):  
Haifeng Yu ◽  
Dewen Dong ◽  
Yan Ouyang ◽  
Qun Liu

Odorless 2-(1,3-dithian-2-ylidene)-3-oxobutanoic acid (1c) was prepared and investigated in the thioacetalization of carbonyl compounds as a 1,3-propanedithiol equivalent. The results showed that the thioacetalization of various carbonyl compounds 2 with 1c proceeded smoothly and afforded the corresponding dithioacetals 3 in high yields (up to 99%) in the presence of acetyl chloride at room or reflux temperatures. Moreover, the thioacetalization exhibited high chemoselectivity between aldehydes and ketones. Key words: chemoselectivity, 2-(1,3-dithian-2-ylidene)-3-oxobutanoic acid, α-oxo ketene dithioacetal, 1,3-propanedithiol equivalent, thioacetalization.


2007 ◽  
Vol 85 (6) ◽  
pp. 416-420 ◽  
Author(s):  
Alireza Hasaninejad ◽  
Abdolkarim Zare ◽  
Hashem Sharghi ◽  
Mohsen Shekouhy ◽  
Reza Khalifeh ◽  
...  

A simple and efficient solvent-free procedure for the preparation of bis(indolyl)methanes via electrophilic substitution reactions of indoles with aldehydes and ketones is described. The reactions took place in the presence of a catalytic amount of silica chloride at room temperature. The advantages of this method are high yields, short reaction times, low cost, and compliance with green-chemistry protocols.Key words: silica chloride, indole, carbonyl compound, solvent-free, bis(indolyl)methane.


2019 ◽  
Vol 16 (6) ◽  
pp. 913-920 ◽  
Author(s):  
Israel Bonilla-Landa ◽  
Emizael López-Hernández ◽  
Felipe Barrera-Méndez ◽  
Nadia C. Salas ◽  
José L. Olivares-Romero

Background: Hafnium(IV) tetrachloride efficiently catalyzes the protection of a variety of aldehydes and ketones, including benzophenone, acetophenone, and cyclohexanone, to the corresponding dimethyl acetals and 1,3-dioxolanes, under microwave heating. Substrates possessing acid-labile protecting groups (TBDPS and Boc) chemoselectively generated the corresponding acetal/ketal in excellent yields. Aim and Objective: In this study. the selective protection of aldehydes and ketones using a Hafnium(IV) chloride, which is a novel catalyst, under microwave heating was observed. Hence, it is imperative to find suitable conditions to promote the protection reaction in high yields and short reaction times. This study was undertaken not only to find a novel catalyst but also to perform the reaction with substrates bearing acid-labile protecting groups, and study the more challenging ketones as benzophenone. Materials and Methods: Using a microwave synthesis reactor Monowave 400 of Anton Paar, the protection reaction was performed on a raging temperature of 100°C ±1, a pressure of 2.9 bar, and an electric power of 50 W. More than 40 substrates have been screened and protected, not only the aldehydes were protected in high yields but also the more challenging ketones such as benzophenone were protected. All the products were purified by simple flash column chromatography, using silica gel and hexanes/ethyl acetate (90:10) as eluents. Finally, the protected substrates were characterized by NMR 1H, 13C and APCI-HRMS-QTOF. Results: Preliminary screening allowed us to find that 5 mol % of the catalyst is enough to furnish the protected aldehyde or ketone in up to 99% yield. Also it was found that substrates with a variety of substitutions on the aromatic ring (aldehyde or ketone), that include electron-withdrawing and electrondonating group, can be protected using this methodology in high yields. The more challenging cyclic ketones were also protected in up to 86% yield. It was found that trimethyl orthoformate is a very good additive to obtain the protected acetophenone. Finally, the protection of aldehydes with sensitive functional groups was performed. Indeed, it was found that substrates bearing acid labile groups such as Boc and TBDPS, chemoselectively generated the corresponding acetal/ketal compound while keeping the protective groups intact in up to 73% yield. Conclusion: Hafnium(IV) chloride as a catalyst provides a simple, highly efficient, and general chemoselective methodology for the protection of a variety of structurally diverse aldehydes and ketones. The major advantages offered by this method are: high yields, low catalyst loading, air-stability, and non-toxicity.


Holzforschung ◽  
2012 ◽  
Vol 66 (3) ◽  
Author(s):  
Takumi Shiraishi ◽  
Toshiyuki Takano ◽  
Hiroshi Kamitakahara ◽  
Fumiaki Nakatsubo

Abstract The direct anodic oxidation of non-phenolic lignin model compounds was investigated to understand their basic behaviors. The results of cyclic voltammetry (CV) studies of monomeric model, such as 1-(4-ethoxy-3-methoxyphenyl)ethanol, are interpreted as the oxidation for Cα-carbonylation did not proceed in the reaction without a catalyst, but a base promotes this reaction. Indeed, the bulk electrolyses of the monomeric lignin model compounds with 2,6-lutidine afforded the corresponding Cα-carbonyl compounds in high yields (60–80%). It is suggested that deprotonation at Cα-H in the ECEC mechanism (E=electron transfer and C=chemical step) is important for Cα-carbonylation. In the uncatalyzed bulk electrolysis of a β-O-4 model dimeric compound, 4-ethoxy-3-methoxyphenylglycerol-β-guaiacyl ether, the corresponding Cα-carbonyl compound was not detected but as a result of Cα-Cβcleavage 4-O-ethylvanillin was found in 40% yield. In the electrolysis reaction in the presence of 2,6-lutidine (as a sterically hindered light base), the reaction stopped for a short time unexpectedly. These results indicate the different electrochemical behavior of simple monomeric model compounds and dimeric β-O-4 models. The conclusion is that direct electrooxidation is unsuitable for Cα-carbonylation of lignin.


2016 ◽  
Vol 40 (12) ◽  
pp. 10300-10304 ◽  
Author(s):  
Raktani Bikshapathi ◽  
Parvathaneni Sai Prathima ◽  
Vaidya Jayathirtha Rao

An efficient, eco-friendly protocol for selective oxidation of primary and secondary Baylis–Hillman alcohols to the corresponding carbonyl compounds in high yields has been developed with 2-iodosobenzoic acid (IBA).


2018 ◽  
Vol 16 (6) ◽  
pp. 924-935 ◽  
Author(s):  
A. Castán ◽  
R. Badorrey ◽  
J. A. Gálvez ◽  
P. López-Ram-de-Víu ◽  
M. D. Díaz-de-Villegas

Novel bifunctional pyrrolidine-based organocatalysts applicable for the asymmetric Michael addition of aldehydes and ketones to nitroolefins have been developed.


2020 ◽  
Vol 18 (23) ◽  
pp. 4390-4394
Author(s):  
Jia-Hui Zhao ◽  
Zhao-Zhao Zhou ◽  
Yue Zhang ◽  
Xuan Su ◽  
Xi-Meng Chen ◽  
...  

Palladium catalyzed visible-light-mediated borylation of inactivated aryl and alkyl halides is reported; the method provided high yields and excellent functional group compatibility.


2020 ◽  
Vol 56 (21) ◽  
pp. 3222-3224
Author(s):  
Stuart Johnson ◽  
Ervin Kovács ◽  
Michael F. Greaney

A variety of quaternary aryl amino acid derivatives can be synthesised using tandem SN2/Smiles rearrangement chemistry involving aryl sulfonamides and α-chloro carbonyl compounds.


Sign in / Sign up

Export Citation Format

Share Document