Hafnium(IV) Chloride Catalyzes Highly Efficient Acetalization of Carbonyl Compounds

2019 ◽  
Vol 16 (6) ◽  
pp. 913-920 ◽  
Author(s):  
Israel Bonilla-Landa ◽  
Emizael López-Hernández ◽  
Felipe Barrera-Méndez ◽  
Nadia C. Salas ◽  
José L. Olivares-Romero

Background: Hafnium(IV) tetrachloride efficiently catalyzes the protection of a variety of aldehydes and ketones, including benzophenone, acetophenone, and cyclohexanone, to the corresponding dimethyl acetals and 1,3-dioxolanes, under microwave heating. Substrates possessing acid-labile protecting groups (TBDPS and Boc) chemoselectively generated the corresponding acetal/ketal in excellent yields. Aim and Objective: In this study. the selective protection of aldehydes and ketones using a Hafnium(IV) chloride, which is a novel catalyst, under microwave heating was observed. Hence, it is imperative to find suitable conditions to promote the protection reaction in high yields and short reaction times. This study was undertaken not only to find a novel catalyst but also to perform the reaction with substrates bearing acid-labile protecting groups, and study the more challenging ketones as benzophenone. Materials and Methods: Using a microwave synthesis reactor Monowave 400 of Anton Paar, the protection reaction was performed on a raging temperature of 100°C ±1, a pressure of 2.9 bar, and an electric power of 50 W. More than 40 substrates have been screened and protected, not only the aldehydes were protected in high yields but also the more challenging ketones such as benzophenone were protected. All the products were purified by simple flash column chromatography, using silica gel and hexanes/ethyl acetate (90:10) as eluents. Finally, the protected substrates were characterized by NMR 1H, 13C and APCI-HRMS-QTOF. Results: Preliminary screening allowed us to find that 5 mol % of the catalyst is enough to furnish the protected aldehyde or ketone in up to 99% yield. Also it was found that substrates with a variety of substitutions on the aromatic ring (aldehyde or ketone), that include electron-withdrawing and electrondonating group, can be protected using this methodology in high yields. The more challenging cyclic ketones were also protected in up to 86% yield. It was found that trimethyl orthoformate is a very good additive to obtain the protected acetophenone. Finally, the protection of aldehydes with sensitive functional groups was performed. Indeed, it was found that substrates bearing acid labile groups such as Boc and TBDPS, chemoselectively generated the corresponding acetal/ketal compound while keeping the protective groups intact in up to 73% yield. Conclusion: Hafnium(IV) chloride as a catalyst provides a simple, highly efficient, and general chemoselective methodology for the protection of a variety of structurally diverse aldehydes and ketones. The major advantages offered by this method are: high yields, low catalyst loading, air-stability, and non-toxicity.

2021 ◽  
Vol 76 (2) ◽  
pp. 85-90
Author(s):  
Abdolkarim Zare ◽  
Manije Dianat

Abstract A highly efficient and green protocol for the synthesis of pyrimido[4,5-b]quinolines has been described. The one-pot multicomponent reaction of dimedone with arylaldehydes and 6-amino-1,3-dimethyluracil in the presence of N,N-diethyl-N-sulfoethanaminium chloride ([Et3N–SO3H][Cl]) as an ionic liquid (IL) catalyst under solvent-free conditions afforded the mentioned compounds in high yields and short reaction times. Our protocol is superior to many of the reported protocols in terms of two or more of these factors: the reaction times, yields, conditions (solvent-free versus usage of organic solvents), temperature and catalyst amount.


2008 ◽  
Vol 86 (8) ◽  
pp. 831-840 ◽  
Author(s):  
Iraj Mohammadpoor-Baltork ◽  
Majid Moghadam ◽  
Shahram Tangestaninejad ◽  
Valiollah Mirkhani ◽  
Arsalan Mirjafari

Different types of primary and secondary alcohols were efficiently transformed to their corresponding methoxymethyl (MOM) and ethoxymethyl (EOM) ethers in the presence of catalytic amounts of H3PW12O40 at room temperature under solvent-free conditions. Selective protection of primary and secondary alcohols in the presence of phenols and tertiary alcohols was achieved by this method. Deprotection of these ethers to their parent alcohols was also performed using this catalyst in ethanol under reflux conditions. We have also found that primary and secondary MOM- and EOM-ethers are selectively deprotected in the presence of phenolic and tertiary ones, methyl and benzyl ethers, esters, and trimethylsilyl ethers by this catalyst. The notable advantages of this protocol are high yields, short reaction times, easy work-up, non-toxicity, easy availability and handling, eco-friendly, and reusability of the catalyst.Key words: methoxymethylation, ethoxymethylation, protection, deprotection, heteropoly acid.


2016 ◽  
Vol 11 (2) ◽  
pp. 3452-3458 ◽  
Author(s):  
Davood Azarifar ◽  
Ommolbanin Badalkhani ◽  
Kaveh Khosravi ◽  
Younes Abbasi

Leucine amino acid, has been explored as an effective catalyst for conversion of ketones and aldehydes into corresponding gem-dihydroperoxides using 30% aqueous hydrogen peroxide in acetonitrile at room temperature. The reactions proceed smoothly within short periods of time to provide the respective gem-dihydroperoxides in excellent yields. Mild reaction conditions, low reaction times, high yields, low environmental impact, use of non-expensive, recyclable and green catalyst are the main merits of the present method.


2020 ◽  
Vol 43 (1) ◽  
pp. 117-124
Author(s):  
Javad Safaei-Ghomi ◽  
Zahra Samadi

AbstractFe3O4@SiO2-L-proline nanoparticles have been used as an effective catalyst for the preparation of pyrimidines by three-component reactions of 1,3-dimethylbarbituric acid, aromatic aldehydes and 4-methyl aniline or 4-methoxy aniline under reflux condition in ethanol. Fe3O4@SiO2-L-proline nanoparticles have been characterized by scanning electronic microscopy (SEM), powder X-ray diffraction (XRD), vibrating sample magnetometer (VSM), thermal gravimetric analysis (TGA), energy dispersive X-ray (EDS), dynamic light scattering (DLS) and FT-IR spectroscopy. This method provides several advantages including, the reusability of the catalyst, low catalyst loading, atom economy, short reaction times and high yields of products.


2016 ◽  
Vol 40 (12) ◽  
pp. 722-726 ◽  
Author(s):  
Afshin Yazdani-Elah-Abadi ◽  
Razieh Mohebat ◽  
Mehrnoosh Kangani

A highly efficient one-pot, two-step microwave-assisted procedure was applied for the rapid and green synthesis of benzo[a]phenazine annulated heterocyclic ring systems from the three- or four-component condensation reactions of 2-hydroxynaphthalene-1,4-dione, o-phenylenediamine, aromatic aldehydes and 1,3-indandione using L-proline as a bifunctional organocatalyst in water. This new procedure has a number of advantages such as high yields, very short reaction times, operational simplicity, simple work-up procedures and avoidance of hazardous or toxic catalysts and organic solvents. Moreover, the catalyst can be recovered and reused several times without much loss of its performance.


2007 ◽  
Vol 85 (6) ◽  
pp. 416-420 ◽  
Author(s):  
Alireza Hasaninejad ◽  
Abdolkarim Zare ◽  
Hashem Sharghi ◽  
Mohsen Shekouhy ◽  
Reza Khalifeh ◽  
...  

A simple and efficient solvent-free procedure for the preparation of bis(indolyl)methanes via electrophilic substitution reactions of indoles with aldehydes and ketones is described. The reactions took place in the presence of a catalytic amount of silica chloride at room temperature. The advantages of this method are high yields, short reaction times, low cost, and compliance with green-chemistry protocols.Key words: silica chloride, indole, carbonyl compound, solvent-free, bis(indolyl)methane.


2021 ◽  
Vol 76 (2) ◽  
pp. 91-95
Author(s):  
Abdolkarim Zare ◽  
Aysoda Ghobadpoor

Abstract A highly efficient and green protocol for the synthesis of 3,3′-(arylmethylene)-bis(2-hydroxynaphthoquinone) {3,3′-(arylmethylene)-bis(2-hydroxynaphthalene-1,4-dione)} derivatives has been developed. The reaction of 2-hydroxynaphthoquinone (2-hydroxynaphthalene-1,4-dione) (2 eq.) and arylaldehydes (1 eq.) in the presence of the dicationic molten salt N,N,N′,N′-tetramethylethylenediaminium bis-hydrogensulfate ([TMEDAH2][HSO4]2) under solvent-free conditions afforded the mentioned compounds in high yields and relatively short reaction times.


2007 ◽  
Vol 60 (8) ◽  
pp. 590 ◽  
Author(s):  
V. T. Kamble ◽  
R. A. Tayade ◽  
B. S. Davane ◽  
K. R. Kadam

Aldehydes are smoothly converted into the corresponding 1,1-diacetates (acylals) in high yields in the presence of a catalytic amount (0.1 mol-%) of iron(III) fluoride at room temperature. The noteworthy features of the present system are shorter reaction times, chemoselective protection of aldehydes, and solvent-free conditions. The procedure is especially useful for large-scale syntheses as the catalyst is highly effective from the view of activity, selectivity, reusability, and economy in the preparation of 1,1-diacetates (acylals).


2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Kobra Nikoofar ◽  
Fatemeh Shahriyari

AbstractA simple, straightforward, and ultrasound-promoted method for the preparation of some highly functionalized tetrahydropyridines reported via pseudo five-component reaction of (hetero)aromatic aldehydes, different anilines, and alkyl acetoacetates in the presence of [N-CH2CO2H-3-pic]+HSO4−, as a novel ionic liquid, in green aqueous medium. The IL was synthesized utilizing simple and easily-handled substrates and characterized by FT-IR, 1H NMR, 13C NMR, GC-MASS, FESEM, EDX, and TGA/DTG techniques. The procedure contains some highlighted aspects which are: (a) performing the MCR in the presence of aqua and sonic waves, as two main important and environmentally benign indexes in green and economic chemistry, (b) high yields of products within short reaction times, (c) convenient work-up procedure, (d) preparing the new IL via simple substrates and procedure.


1999 ◽  
Vol 23 (7) ◽  
pp. 434-435
Author(s):  
Mohammed M. Hashemi ◽  
Yousef Ahmadi Beni

Copper(I) Chloride adsorbed on Kieselguhr in the presence of oxygen catalyses oxidation of alkyl halides and alkyl tosylates to the aldehydes and ketones in high yields.


Sign in / Sign up

Export Citation Format

Share Document