Slicing Cut Marks on Animal Bones: Diagnostics for Identifying Stone Tool Type and Raw Material

2006 ◽  
Vol 31 (2) ◽  
pp. 147-163 ◽  
Author(s):  
Haskel J. Greenfield
Keyword(s):  
Raw Material ◽  
Stone Tool ◽  
Cut Marks ◽  
Animal Bones

scholarly journals Using 3D Microscopy to Analyze Experimental Cut Marks on Animal Bones Produced with Different Stone Tools

2015 ◽  
Vol 6 (2) ◽  
pp. 267-275 ◽  
Author(s):  
Erika Moretti ◽  
Simona Arrighi ◽  
Francesco Boschin ◽  
Jacopo Crezzini ◽  
Daniele Aureli ◽  
...  
Keyword(s):  
Microscopic Analysis ◽  
Stone Tools ◽  
Stone Tool ◽  
Profile Data ◽  
Mechanical Motion ◽  
Cut Marks ◽  
3D Microscopy ◽  
Animal Bones ◽  
Digital Microscope ◽  
The Moment

This study uses a combination of digital microscopic analysis and experimental archaeology to assess stone tool cut marks on animal bones. We used two un-retouched flint flakes and two burins to inflict cut marks on fresh, boiled, and dry ungulate  bones. The experiment produced three series of three engravings on each bone with each of the experimental tools. The first series involved one single stroke; the second, two strokes in the same direction; and the third, multiple strokes using a to-and-fro movement. We analyzed the striations using a Hirox 3D digital microscope (KH-7700) and collected metric and profile data on the morphology of the cut marks. In order to describe the shape of each cross section, we calculated the ratio between the breadth at the top and the breadth at the floor of cut marks. Preliminary results show that both the tool type and the method of creating the cut mark influence the shape of the resulting groove. In our experiment, morphological parameters can be used to differentiate between marks produced using un-retouched flint flakes and those produced using burins. However, neither morphological nor morphometric analysis allows us to identify the mechanical motion used to produce the cuts, nor the state of the bone (fresh, boiled, or dry) at the moment of marking. 

scholarly journals Elephant bones for the Middle Pleistocene toolmaker

PLoS ONE ◽  
2021 ◽  
Vol 16 (8) ◽  
pp. e0256090
Author(s):  
Paola Villa ◽  
Giovanni Boschian ◽  
Luca Pollarolo ◽  
Daniela Saccà ◽  
Fabrizio Marra ◽  
...  
Keyword(s):  
Upper Paleolithic ◽  
Raw Material ◽  
General Idea ◽  
Early Pleistocene ◽  
Stone Tool ◽  
Middle Pleistocene ◽  
Medium Size ◽  
Bone Tools ◽  
Lithic Industry ◽  
Taphonomic Analysis

The use of bone as raw material for implements is documented since the Early Pleistocene. Throughout the Early and Middle Pleistocene bone tool shaping was done by percussion flaking, the same technique used for knapping stone artifacts, although bone shaping was rare compared to stone tool flaking. Until recently the generally accepted idea was that early bone technology was essentially immediate and expedient, based on single-stage operations, using available bone fragments of large to medium size animals. Only Upper Paleolithic bone tools would involve several stages of manufacture with clear evidence of primary flaking or breaking of bone to produce the kind of fragments required for different kinds of tools. Our technological and taphonomic analysis of the bone assemblage of Castel di Guido, a Middle Pleistocene site in Italy, now dated by 40Ar/39Ar to about 400 ka, shows that this general idea is inexact. In spite of the fact that the number of bone bifaces at the site had been largely overestimated in previous publications, the number of verified, human-made bone tools is 98. This is the highest number of flaked bone tools made by pre-modern hominids published so far. Moreover the Castel di Guido bone assemblage is characterized by systematic production of standardized blanks (elephant diaphysis fragments) and clear diversity of tool types. Bone smoothers and intermediate pieces prove that some features of Aurignacian technology have roots that go beyond the late Mousterian, back to the Middle Pleistocene. Clearly the Castel di Guido hominids had done the first step in the process of increasing complexity of bone technology. We discuss the reasons why this innovation was not developed. The analysis of the lithic industry is done for comparison with the bone industry.

scholarly journals Preliminary Archaeopetrological Study of the Lithic Industry From the l’Hort de la Boquera Rock Shelter (Margalef de Montsant, Tarragona, Spain): Applying Mineralogical and Geochemical Techniques

2018 ◽  
Vol 56 ◽  
pp. 23-33
Author(s):  
Mar Rey-Solé ◽  
Maria Pilar García-Argüelles ◽  
Jordi Nadal ◽  
Xavier Mangado ◽  
Anders Scherstén ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Raw Materials ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
X Ray Diffraction ◽  
Inductively Coupled ◽  
Study Results ◽  
Lithic Industry ◽  
Plasma Mass Spectrometry

The l’Hort de la Boquera site is located in the northeastern part of Iberia and its stone tool assemblage includes up to 25,000 flint artefacts. This is the first approach to the analysis of the raw material through an archaeopetrological study. Results were obtained by use of mineralogi¬cal techniques: macroscopic and petrographic analysis, Scanning Electronic Microscopy (SEM), Micro-Raman and X-Ray diffraction (XRD); additionally, Laser Ablation Inductively Coupled Plasma Mass Spectrometry was applied. It has been possible to discriminate at least four flint categories, the ‘Evaporitic flint type’ (with two local subvarieties – ‘Common evaporitic’ and ‘Garnet’ varieties) that comes from local outcrops of the Ulldemolins Complex, and two flint types that had their origin further afield: the ‘Charophyta flint type’ (coming from the Torrente de Cinca Unit) and the ‘Dark flint type’ (from the La Serra Llarga Formation).These results make this study the most comprehensive analysis of raw materials that has been carried out in the area so far

scholarly journals Procurement and mobility during the Late Pleistocene: Characterising the stone-tool assemblage of the Picamoixons site (Tarragona, NE Iberian Peninsula)

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
María Soto
Keyword(s):  
Iberian Peninsula ◽  
Late Pleistocene ◽  
Raw Materials ◽  
Management Strategies ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
Hunter Gatherers ◽  
Definition Of ◽  
Ne Iberian Peninsula

The Picamoixons site is a rockshelter located in the province of Tarragona (NE Iberian Peninsula). It was object of two rescue campaigns during 1988 and 1993, which led to the recovery of a complete archaeological assemblage, including stone tools as well as faunal and portable art remains that date the occupation to the 14th to 11th millennium BP (calibrated). This study involves a petrographic characterisation of the stone-tool assemblage in order to establish: 1) the procurement areas, 2) the raw materials management strategies and 3) the mobility radius and territorial sizes of the hunter-gatherers groups that occupied the site. The method applied comprises in a multiscale analysis that includes systematic prospection, the petrographic characterisation of geological and archaeological samples, an analysis of the chert types represented in the knapping sequence, and the definition of the mobility axes and areas frequented according to lithic procurement.A petrographic analysis of the chert in the prospected area led to the definition of nine macroscopic varieties related to five types (Vilaplana, Morera, Maset, Vilella and Tossa cherts), related to Lower and Upper Muschelkalk (Triassic), Lutetian, Bartonian (Palaeocene) and Sannonian (Oligocene) deposits.The study of the knapping sequences indicates the main exploitation of Bartonian cherts (Tossa type), and the use of Lutetian cherts (Maset and Morera types) for configuring retouched tools. The exploitation of the remaining raw material types identified is considered sporadic and opportunistic.Defining the procurement areas enabled the mobility radius to be assessed as between 3 and 30 km, highlighting the importance of the fluvial basins as natural movement pathways. The results indicate that the main procurement territory was 16 km2 in area, associable with a forager radius. The most remote procurement distances suggest a maximum exploitation area of 260 km2, defining an intra-regional range. This range presents parallelisms with various contemporaneous hunter-gatherers groups in Western Europe, suggesting a progressive mobility reduction dynamic during the Late Pleistocene-Initial Holocene.

scholarly journals Raw material optimization and stone tool engineering in the Early Stone Age of Olduvai Gorge (Tanzania)

2020 ◽  
Vol 17 (162) ◽  
pp. 20190377 ◽  
Author(s):  
Alastair Key ◽  
Tomos Proffitt ◽  
Ignacio de la Torre
Keyword(s):  
Functional Performance ◽  
Material Selection ◽  
Raw Materials ◽  
Cutting Tools ◽  
Raw Material ◽  
Stone Tool ◽  
Olduvai Gorge ◽  
Stone Age ◽  
Material Optimization ◽  
Early Stone Age

For more than 1.8 million years hominins at Olduvai Gorge were faced with a choice: whether to use lavas, quartzite or chert to produce stone tools. All are available locally and all are suitable for stone tool production. Using controlled cutting tests and fracture mechanics theory we examine raw material selection decisions throughout Olduvai's Early Stone Age. We quantify the force, work and material deformation required by each stone type when cutting, before using these data to compare edge sharpness and durability. Significant differences are identified, confirming performance to depend on raw material choice. When combined with artefact data, we demonstrate that Early Stone Age hominins optimized raw material choices based on functional performance characteristics. Doing so flexibly: choosing raw materials dependent on their sharpness and durability, alongside a tool's loading potential and anticipated use-life. In this way, we demonstrate that early lithic artefacts at Olduvai Gorge were engineered to be functionally optimized cutting tools.

scholarly journals From LBK to SBK: Pottery, Bones, Lithics and Houses at the Neolithic site of Hrdlovka, Czech Republic

2016 ◽  
Vol 2 (1) ◽  
Author(s):  
Václav Vondrovský ◽  
Jaromír Beneš ◽  
Michaela Divišová ◽  
Lenka Kovačiková ◽  
Petr Šída
Keyword(s):  
Czech Republic ◽  
Cultural Change ◽  
Environmental Conditions ◽  
Distribution Networks ◽  
Transitional Period ◽  
Raw Material ◽  
Extensive Area ◽  
Animal Bones ◽  
Production And Distribution ◽  
Architectural Development

AbstractThe paper is focused on the period of cultural change at the turn of 6th and 5th millennia BC, when the uniform Linear Pottery Culture (LBK) occupying an extensive area disintegrated in several local groups or cultures, including the Stroked Pottery Culture (SBK) emerging in the regions of Bohemia and Saxony. The data comprising pottery, animal bones, lithics, as well as architectural attributes from Hrdlovka site, situated in northwest Bohemia, are presented. In accordance with the sites of Hrbovice-Chabařovice and Dresden- Prohlis a rather uninterrupted LBK/SBK transition has been observed, which contrasts with the image of “LBK crisis” observed in other regions. Lithics production and distribution networks of raw material seem to be stable. The change in stockkeeping strategies correlating with the transitional period are considered rather as modification of local environmental conditions. On the level of households, a similar architectural development has been documented at the Hrdlovka and Dresden-Prohlis sites. The processes of LBK/SBK transition in terms of cultural change are also discussed.

Energetic Efficiency and Lithic Technology: An Upper Mississippian Example

1992 ◽  
Vol 57 (3) ◽  
pp. 467-481 ◽  
Author(s):  
Robert J. Jeske
Keyword(s):  
Lithic Technology ◽  
Optimal Foraging Theory ◽  
Poor Quality ◽  
Raw Material ◽  
Stone Tool ◽  
Energy Budgets ◽  
Energetic Efficiency ◽  
Human Populations ◽  
Projectile Points ◽  
Formal Tool

Optimal-foraging theory and the concept of energetic efficiency have been used in archaeology for over a decade, usually to explore subsistence behavior. People, however, made choices for energy expenditure in other areas of culture, including lithic technology. It is suggested that a shift in the allocation of energy as an adaptive response to changes in social organization caused the widely noted decline in formal tool types and stone-tool refinement in the late prehistoric periods in eastern North America. Data from an Upper Mississippian village are used to demonstrate the economic use of poor-quality lithic raw material. A bipolar technique was used to produce flake blanks for triangular projectile points as well as a peculiar but common Upper Mississippian tool, the humpback biface. It is suggested that bipolar reduction and other lithic efficiency and economizing strategies are indicators of stress on the energy budgets of human populations.

Raw-Material Availability and the Organization of Technology

1994 ◽  
Vol 59 (1) ◽  
pp. 21-34 ◽  
Author(s):  
William Andrefsky
Keyword(s):  
Production Technology ◽  
Raw Materials ◽  
Poor Quality ◽  
Important Variable ◽  
Raw Material ◽  
Stone Tool ◽  
High Quality ◽  
Formal Tool ◽  
Lithic Raw Materials ◽  
Tool Types

Ethnographic examples of stone-tool makers in Australia and archaeological examples from three different areas in the western United States indicate that the availability of lithic raw materials is an important variable conditioning stone-tool production technology. Attributes of availability such as abundance and quality of lithic raw materials condition the production of formal- vs. informal-tool types. Poor-quality raw materials tend to be manufactured into informal-tool designs. High-quality lithic raw materials tend to be manufactured into formal-tool designs when such materials occur in low abundance. When high-quality materials occur in great abundance both formal- and informal-tool designs are manufactured. Other factors, such as residential mobility or sedentism, are found to be less-important determinates of lithic-production technology.

Sign in / Sign up

Export Citation Format

Share Document