The earliest transverse grooved stones of Eurasia: Near Eastern distribution, types and chronology

Transverse grooved stones (TGS) believed to be used as shaft straighteners, first made their appearance at Epipalaeolithic sites in the Near East from where they spread to the Mediterranean coasts of Africa and Europe, but mostly to Northern Eurasia (the steppe, forest-steppe, and semi-desert zones). It has been discovered that the spread of TGA has been carried out along different paths. Moreover, grooved stones along each of these transmission routes can be distinguished by their unique decorative and morphological characteristics. The aim of this paper is to clarify the circumstances and the date of appearance of the first TGS, localization of their initial areas, and identification of their respective decorative and morphological features. This is a necessary condition for identifying the starting points of the subsequent transit carriers of TGS' tradition and tracing the directions of interaction in Eurasia during the end of the Pleistocene – the first half of the Holocene period using TGS as markers. The initial database was formed on the basis of the scientific publications on the Near East. The following is a presentation of the analytical review of at least 200 grooved stones and 80 sites in their starting area in south-western Asia. The analysis used a systematic approach with emphasis on chronology, environment, petrography, morphology, functional-typological data where such were available, and TGS’ decor. But first of all, the study pays attention to the distribution of TGS and their cultural and chronological boundaries in this region. For this purpose, it was performed the mapping of findings in two chronological levels – up to 8000 thousand BCE and after, with the marking of decorated products. The results enabled us to detect that the geographical spread of grooved artefacts of this type is limited in the Near East to the area of central Anatolia and Fertile Crescent, with a boundary along the desert-steppes. At least three concentrations can be clearly distinguished: the Levant, Zagros Mountains, and Upper Mesopotamia - central Anatolia, where the products are characterized by specific features of decorative and morphological design and in one case (Levant) an additional observed petrographic specificity. Currently, the earliest cases are recorded in Early Natufian contexts in the Levant and in Epipalaeolithic contexts of the Anatolian plateau since the 13th millennium cal BCE. Thus, one can confidently state that the introduction of TGS in the Middle East is generally linked to the Epipalaeolithic sites (Natufian, Harifian, and Western Zarzian) and is definitely associated with hunter-gatherers. The heyday of TGS falls on the PPNA and lasts to the beginning of the early Bronze Age, when they finally disappear.

Economy and status of Neolithic to Early Bronze age sites in the Southern Caucasus during the 6th‐3rd mill. BCE: The evidence from ground stone tools

In the Southern Caucasus, the evolution of the Neolithic to Bronze age (6th-3rd millenia BCE) economies is often investigated through the prism of adaptation to constrasted landscapes and environments (arid plain, high moutains, subtropical western coasts) and strategies of natural resource exploitation. This overview of the main technological and functional characteristics of ground stone tools from about 20 sites in the Kura Valley (Georgia, Azerbaijan) contributes to the discussion surrounding these questions. After an overview of the evolution of the grinding equipment and stone tool manufacture within a long term perspective, from the Late Neoliothic to the Early Bronze Age, several issues are adressed. The composition of the macrolithic toolkit is a key issue when discussing the importance of agriculture versus pastoralism in the economy of these populations, which evolved in different regional and environmental contexts. Its management also contributes to our understanding of the degree of sedentarity versus mobility of the populations. Finally, we discuss how the technical evolution of the macrolithic toolkit reflects the principal global changes occurring during this long period of time (neolithisation, emergence of metallurgy, and the mining phenomenon) and their cultural meaning. Our initial results underline the significance of some implements as cultural markers, and also contribute to defining the common cultural background and regional specificities within the South Caucasus region.

Lithic Raw Material in the Cantabrian Region: Dialectical relationship between flint and quartzite in the Palaeolithic record

The increase, in quantitative and qualitative terms, of research attending to the geological nature of rocks found in archaeological contexts is changing our perspectives about social and economic territories articulated by Palaeolithic societies in the Cantabrian Region. Practically the only raw material researched in a solid geoarchaeological approach in this area is flint. This paper addresses how the near absence of in-depth geoarchaeological research into raw materials other than flint is modifying our perception of the procurement and management mechanism of raw material in the Cantabrian Region during the Palaeolithic. To consider this matter in depth, we present the bibliographic and quantitative analysis of 30 representative archaeological sites from the Cantabrian Region whose assemblages were described lithologically using basic and primary categories. The state of play depicts a geographic distribution of raw material in the Cantabrian Region where quartzite is associated with the western sector and flint with the east. Interconnected with this axis, there is a chronological tendency that promotes standardisation in the use of flint by Palaeolithic societies following a chronological order, from the older to the more recent periods. This information, and its contextualisation with the new perspectives resulting from the application of the geoarchaeological proposal used to understand flint procurement, allows us to understand the general tendencies of raw material distribution of the region. Especially, we can detect how the absence of geoarchaeological methodologies of other raw materials than flint has modified the perception of the economic and social dynamics articulated around raw material by Palaeolithic people. This bias does not only affect the geographical and chronological axes, emphasising information from the regions and periods where flint is represented, but also promotes the over-interpretation of long-distance procurement, therefore, building up narratives exclusively based on human mobility. This situation has generated an incomplete and unbalanced picture of the procurement and management strategies followed by Palaeolithic societies because quartzite, the second most-often used lithic raw material, and other raw materials have only been studied using geoarchaeological methods within the last few years. This research finally points to the continuation of in-depth research of quartzite and other raw materials as the next steps to re-interpret the current paradigms about procurement and management of raw material by Palaeolithic societies, and, therefore, modify our perspectives of social and economic territories. The research presented here addresses this situation and proposes the in-depth research of quartzite as the next step to re-interpret the current paradigms about procurement and management of raw material by Palaeolithic societies, and, therefore, modify our perspectives of social and economic territories. To do so, we have proposed a general raw material framework in the Cantabrian Region based on the 30 most representative sites whose assemblages were described lithologically using basic and primary categories. The state of the art depicted a geographic distribution of raw material in the Cantabrian Region where quartzite is associated with the western sector and flint with the east. Interconnected with this axis, there is a chronological tendency that promotes standardisation in the use of flint by Palaeolithic societies following a chronological order, from the older to the more recent periods. This information, and its contextualisation with the new perspectives resulting from the application of the geoarchaeological proposal used to understand flint procurement, allows us to understand the bias derived by the absence of geoarchaeological methodologies of other raw materials than flint. These biases are not only related with the geographical and chronological axes, emphasising information from the regions and periods where flint is represented, but also with the overinterpretation of long-distance procurement, therefore, promoting narratives exclusively based on human mobility.

A prehistoric jade axe from Galicia (Northwestern Iberia): Researching its origin

The Vilapedre axe (Lugo, Northwest Iberia) has been traditionally considered by archaeologists as evidence of prehistoric long-distance contacts along the Atlantic Coast of France and Spain. This artefact - as other “Tumiac type” axes (long polished blades, generally butt-perforated) - would have been produced in Brittany during the Neolithic (5th millennium BCE) using jadeitite as raw material, a green-coloured rock for which there are sources in the western Italian Alps. In this paper, we have traced the possible archaeological origin of this artefact back by examining the personal files of one of its first owners, Santiago de la Iglesia. Furthermore, we have conducted a mineralogical (X-Ray Diffraction, XRD) and an elemental analysis (Scanning Electron Microscopy with Energy Dispersive X-ray Detection, SEM-EDX) of both the Vilapedre axe and geological samples from several places at the Alps where prehistoric quarrying of greenstones has been reported. The aims were physicochemically characterizing the axe to provide information about its possible geological source. During our analyses, we have found significant compositional similarities between the Vilapedre axe and one of the geological samples coming from the Alps (Alp06). The results are therefore consistent with the alleged Alpine origin of this artefact. The presence of this axe in Northwest Spain, together with other evidence, such as the presence of objects of Iberian origin in Breton monuments, strongly suggests the existence of contacts between both regions of the Atlantic façade during the Neolithic onwards in which seafaring would undoubtedly have played an important role.

The T-shaped “axe” from Northeast Honduras: Observations on chronology and function of a pre Columbian stone tool

This paper provides a description and analysis of a distinctive type of pre-Columbian stone tool, usually termed a T-shaped axe, found almost exclusively in Northeast Honduras, Central America. There have been very few detailed or technical studies of lithics from Honduras. Early archaeological research and the current understanding of the regional prehistory are included, with Northeast Honduras viewed as a frontier zone located between the Mesoamerican and Isthmo-Columbian culture areas. Our study examines, in particular, a collection of these tools curated today at the Cambridge University Museum of Archaeology and Anthropology (CUMAA). The 39 (whole and fragmentary) specimens were collected between 1937 and 1939, from the Bay Islands, Northeast Honduras, but have never been published. This paper classifies the collection specimens into five varieties, based on morphology, with sample statistics, form dimensions, and illustrations provided for each. Manufacturing technology is primarily percussion flaking. The tool type is compared with similar specimens excavated and described from the Bay Islands and adjacent Honduran mainland, and with similar appearing implements from elsewhere in Central America. Insights about the possible age and function of these unusual, and distinctive, lithics are included. Based on preliminary macroscopic and microscopic analyses, it is concluded that the tools may have been employed as agricultural implements (hoes or spades), primarily for digging activities, rather than as axes or weapons used for cutting and slicing. It is most likely that these implements first appeared about 800 CE, and continued in use until at least 1400 CE. The tool type is most probably a local (not imported) product. More functional analysis is encouraged.

Book review: The prehistoric apprentice: Investigating apprenticeship, know-how and expertise in prehistoric technologies; L’apprenti préhistorique: Appréhender l’apprentissage, les savoir-faire et l’expertise à travers les productions techniques des soci

Describing cultural change and variability and inferring sociocultural dynamics about past people and communities may be among archaeology’s main goals as a field of practice. In this regard, the concept of skill has proved its usefulness to, time and again, expand the breath of archaeologists and lithic technologists’ analyses. It covers a wide range of applications, from apprenticeship, cognition, paleo-sociology, spatial organization. It is one of the main causes for material culture variability, up there with raw material constraints, design, technological organization or cultural norms. Yet, while skill has certainly been the focus of some research in the last decades, it remains quite peripheral, when considering how central the concept should be to technological inquiries. Whatever the reasons may be, this book, edited by Laurent Klaric and fully bilingual (French and English), aims at changing that, and argues for skill to become a central concern in lithic technology. Its chapters do so strongly and the end-result is a book that should become a reference for lithic technologists, whatever their research interests or schools of thought may be.

Shine on you crazy diamond: Symbolism and social use of fluorite ornaments in Iberia’s late prehistory

Fluorite ornaments have been recorded in different sites of Europe since Upper Paleolithic. Due to its visual appearance and physical properties, some translucent or transparent mineralogies like fluorite were searched for or casually acquired by late prehistory’s human communities. After intensive research on archaeological contexts from the Iberian Peninsula with personal ornaments from 4th to 2nd millennia BCE, we have recently identified and characterized for the first time an important number of fluorite ornaments, confronting a previous background where little attention was paid. Our work has been carried out in different archaeological collections and museums from the whole Iberian Peninsula by non-destructive techniques (Raman spectroscopy, portable X-ray fluorescence (p-XRF) and X-ray Diffraction (XRD), that revealed the nature of fluorite ornaments and points to its consideration as scarce and highly symbolic items during late prehistory. A total of 36 fluorite beads from 23 sites are here recorded and studied, many of them inedits or wrong catalogued as other mineralogies. These adornments could have important roles in trade and use among the communities of Iberia from the 4th millennium BCE onwards, because of their scarcity and its recurrent association with important funerary complex and exotic materials. Fluorite ornaments could have been significant and special symbols in the development of new and exclusive raw materials in the context of increasing social complexity and inequality.

Lithic industries, territory and mobility in the western Linear Pottery Culture

Territory is a complex notion whose definition varies depending on the discipline in which it is applied. Research on the notion of territory has often focused on the Palaeolithic. Studies in this field are mainly based on comparisons between archaeological assemblages and ethnographic data, an approach originating from the work of L.R. Binford, who introduced the concept of mobility, leading to various models of spatial occupation. How have researchers approached the notion of territory with regard to the first mixed farming populations of the Linear Pottery Culture in the Seine Basin and neighbouring regions? Can lithic industries contribute to our understanding of how these first sedentary populations perceived their territory? In this paper, we show that these first Neolithic communities likely obtained their siliceous materials via direct procurement strategies across a territory that they knew well and regularly frequented. In our study area, centred around the Rhine-Meuse region and the Seine Basin, two distinct litho-spaces are comprised of: 1) small numbers of minor territories with local resources, and 2) vast territories requiring greater mobility among the groups that occupied them. Furthermore, the procurement strategies of the occupants of the regions with few siliceous resources seem to have been based on long-distance relationships and networks. In this case, a high degree of mobility and ensuing social relations would have contributed to the attractivity of villages.

Book review: Anthropomorphic images in rock art paintings and rock carvings

Anthropomorphic Images in Rock Art Paintings and Rock Carvings by Terence Meaden and Herman Bender Archaeopress, 2020, pp. 322. ISBN 978-178-969-357-7 https://www.archaeopress.com/archaeopressshop/public/displayProductDetail.asp?id={19B19455-613A-41E7-968F-D99720CA62C2}

Hunter-gatherer mobility and territories in the dunefields of center Argentina

The distribution of certain rocks in the landscape allows us to reconstruct diverse aspects of past hunter-gatherer behavior. In this work, we evaluate the mobility patterns employed by these groups and the presence or absence of boundaries in the Aeolian system of the center of Argentina. To accomplish this objective, we consider two types of evidence: 1) raw material frequencies and distributions in three areas of this Aeolian System and 2) presence and frequency of knapping stones from Tandilia sources. We construct a fall-off curve that is based on the relationship between the frequency of an item and the distance to the source of supply. The characteristics of each area yielded the human groups that inhabited delineate different modes of exploitation of the rocks. The fall-off curve documents a steep drop-off between 300 and 350 km from the Tandilia source and the spatial analysis indicates that within this distance the source probably represents the threshold of direct access to the quarries. Tandilia stone-tools seem to systematically supply a relatively wide area of the Central Pampean Dunefields of the Pampa grasslands, through varied processes, but they arrive at very low frequencies over great distances. The presence of Tandilia rocks in the Western Pampean Dunefields and Western Pampas Sand Mantles and Dunefields indicates social interaction between human groups that shared some common technological knowledge. The presence of stones in the Central Pampean Dunefields coming from the xerophytic woodland of the Dry Pampas can be related with contacts and exchanges among the hunter-gatherer group that occupied different territories.