Thermal evolution of Mg-Al-CO3 hydrotalcites

Clay Minerals ◽  
2004 ◽  
Vol 39 (2) ◽  
pp. 177-191 ◽  
Author(s):  
Ts. Stanimirova ◽  
N. Piperov ◽  
N. Petrova ◽  
G. Kirov

AbstractThe thermal decomposition of hydrotalcite (HT), with chemical composition Mg1-xAlx(OH)2(CO3)x/2.(1-3x/2)H2O, (0.20 < x ≤ 0.33), is a complex sequence of dehydration, dehydroxylation and decarbonization and leads to the formation of a series of metaphases: HT-D (dehydrated HT), HT-B (partially dehydroxylated HT) and MO (mixed oxides with periclase-like structure). The evolution of water and CO2 in natural and synthetic hydrotalcites (a Mg/Al ratio between 2:1and 3.7:1), heated to 800°C, was investigated by differential thermal analysis, thermogravimetry and evolved gas analysis. At least six endothermic and two exothermic effects were established by computer-aided resolving of the curves. The formation of each HT metaphase was related to the release of a discrete number of water molecules depending on the Al content in the samples and each appeared as a corresponding endothermic peak in the DTA curves. The exothermic processes associated with the crystallization of HT-B and MO metaphases were specified by decomposition of DTA curves. The evolution of CO2 during the thermal decomposition of the carbonate groups was found to be different for the samples studied. The preservation of CO3 even at high temperatures was established for synthetic samples with a high Al content. The release of volatile H2O and CO2 (which comprise ~40% of the sample mass) provokes fine cracking both along and across the layers.

2018 ◽  
Vol 149 ◽  
pp. 129-142 ◽  
Author(s):  
Joanna Pagacz ◽  
Edyta Hebda ◽  
Bartłomiej Janowski ◽  
Dariusz Sternik ◽  
Małgorzata Jancia ◽  
...  

1976 ◽  
Vol 29 (4) ◽  
pp. 711 ◽  
Author(s):  
DJ Stabb

The basic halides MoOX(H2O), (X = F, Cl) were examined by vacuogravimetric and evolved gas analysis and by X-ray and electron diffraction techniques. The basic chloride prepared by slow crystallization had y = 3.08, with an orthorhombic unit cell 0.723 by 0.820 by 1.805 nm. Basic chlorides produced by rapid precipitation were less crystalline, of slightly larger unit cell dimensions and had 3.0 < y < 4.3. The water in excess of y = 3 was loosely held, while three water molecules per molybdenum were more strongly held. The fluoride, which could not be obtained with the perfect MoOF(H2O)3 stoichiometry, was isomorphous (cell parameters 0.710 by 0.823 by 1.824 nm for [MoOF0.96(OH)0.04(H2O)3] (H2O)0.28). It is concluded that the only hydrate of MoOX existing under normal conditions is MoOX(H2O)3, not the previously reported tetrahydrate.


Sign in / Sign up

Export Citation Format

Share Document