scholarly journals Understanding cost drivers and economic potential of two variants of ionic liquid pretreatment for cellulosic biofuel production

2014 ◽  
Vol 7 (1) ◽  
pp. 86 ◽  
Author(s):  
NVSN Konda ◽  
Jian Shi ◽  
Seema Singh ◽  
Harvey W Blanch ◽  
Blake A Simmons ◽  
...  
2017 ◽  
Vol 5 (11) ◽  
pp. 10176-10185 ◽  
Author(s):  
Binod Neupane ◽  
N. V. S. N. Murthy Konda ◽  
Seema Singh ◽  
Blake A. Simmons ◽  
Corinne D. Scown

2021 ◽  
Vol 23 (8) ◽  
pp. 3127-3140
Author(s):  
Harsha D. Magurudeniya ◽  
Nawa Raj Baral ◽  
Alberto Rodriguez ◽  
Corinne D. Scown ◽  
Jeff Dahlberg ◽  
...  

The use of ensiled biomass sorghum enables implementation of relatively mild pretreatment conditions compared to non-ensiled sorghum and results in higher sugar yields, which reduces the biofuel production cost and associated carbon footprint.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Shannon M. Hoffman ◽  
Maria Alvarez ◽  
Gilad Alfassi ◽  
Dmitry M. Rein ◽  
Sergio Garcia-Echauri ◽  
...  

Abstract Background Future expansion of corn-derived ethanol raises concerns of sustainability and competition with the food industry. Therefore, cellulosic biofuels derived from agricultural waste and dedicated energy crops are necessary. To date, slow and incomplete saccharification as well as high enzyme costs have hindered the economic viability of cellulosic biofuels, and while approaches like simultaneous saccharification and fermentation (SSF) and the use of thermotolerant microorganisms can enhance production, further improvements are needed. Cellulosic emulsions have been shown to enhance saccharification by increasing enzyme contact with cellulose fibers. In this study, we use these emulsions to develop an emulsified SSF (eSSF) process for rapid and efficient cellulosic biofuel production and make a direct three-way comparison of ethanol production between S. cerevisiae, O. polymorpha, and K. marxianus in glucose and cellulosic media at different temperatures. Results In this work, we show that cellulosic emulsions hydrolyze rapidly at temperatures tolerable to yeast, reaching up to 40-fold higher conversion in the first hour compared to microcrystalline cellulose (MCC). To evaluate suitable conditions for the eSSF process, we explored the upper temperature limits for the thermotolerant yeasts Kluyveromyces marxianus and Ogataea polymorpha, as well as Saccharomyces cerevisiae, and observed robust fermentation at up to 46, 50, and 42 °C for each yeast, respectively. We show that the eSSF process reaches high ethanol titers in short processing times, and produces close to theoretical yields at temperatures as low as 30 °C. Finally, we demonstrate the transferability of the eSSF technology to other products by producing the advanced biofuel isobutanol in a light-controlled eSSF using optogenetic regulators, resulting in up to fourfold higher titers relative to MCC SSF. Conclusions The eSSF process addresses the main challenges of cellulosic biofuel production by increasing saccharification rate at temperatures tolerable to yeast. The rapid hydrolysis of these emulsions at low temperatures permits fermentation using non-thermotolerant yeasts, short processing times, low enzyme loads, and makes it possible to extend the process to chemicals other than ethanol, such as isobutanol. This transferability establishes the eSSF process as a platform for the sustainable production of biofuels and chemicals as a whole.


2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Zhuo Liu ◽  
Shih-Hsin Ho ◽  
Kengo Sasaki ◽  
Riaan den Haan ◽  
Kentaro Inokuma ◽  
...  

2018 ◽  
Vol 1123 ◽  
pp. 012052 ◽  
Author(s):  
Asyraf Hanim Ab Rahim ◽  
Zakaria Man ◽  
Ariyanti Sarwono ◽  
Wan Suzaini Wan Hamzah ◽  
Normawati M. Yunus ◽  
...  

2012 ◽  
Vol 59 (1) ◽  
Author(s):  
Ahmad Idi ◽  
Madihah Md. Salleh ◽  
Zaharah Ibrahim ◽  
Shaza Eva Mohamad

One of the major advantages of biofuel over fossil fuel is that it is environmentally friendly but unfortunately most of the chemicals used in the pretreatment of lignocelluloses biomass to produce biofuel can cause adverse effects to the environment. In this study, ionic liquid was used for the pretreatment of cocoa waste. Its effectiveness in the treatment process was compared to the alkalis and acids used in the conventional pretreatment media. The effectiveness of pretreatment using ionic liquid, H2SO4 and NaOH was based on the reduction of biomass, production of reducing sugar and also bioethanol. Ionic liquid pretreatment was found to show minimal biomass loss of only 31% after pretreatment compared to H2SO4 and NaOH which showed loss of 61% and 79% respectively. The untreated biomass has 10% amount of cellulose but upon pretreatment with ionic liquid, H2SO4 and NaOH, significant amount of cellulose was detected compared to NaOH which produced only 7% of cellulose. Two types of yeasts were also isolated from Malaysian local fermented food, the tapai ubi which were tested for the abilities to ferment the reducing sugar produced. Using the DNS method for determining reducing sugar, ionic liquid pretreatment was shown to produce 6.3×10–2g/L of reducing sugar while the untreated, H2SO4 and NaOH pretreatment produced 2.87×10–2g/L, 7.4×10–2g/L and 3.37×10–2g/L respectively at the end of 24 hours of incubation. Bioethanol produced during the fermentation was analysed using gas chromatography. Ionic liquid produced a total of 7.885g/L, H2SO4 produced 7.911g/L NaOH produced 6.824g/L and untreated cocoa waste produced 5.116g/L of ethanol at the end of 24 hours incubation.


Sign in / Sign up

Export Citation Format

Share Document