scholarly journals Radar signal recognition based on triplet convolutional neural network

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Lutao Liu ◽  
Xinyu Li
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Signal To Noise Ratio ◽  
Poor Performance ◽  
Radar Signal ◽  
Time Frequency ◽  
Low Snr ◽  
Triplet Loss ◽  
Recognition Success ◽  
Fully Connected

AbstractRecently, due to the wide application of low probability of intercept (LPI) radar, lots of recognition approaches about LPI radar signal modulations have been proposed. However, facing the increasingly complex electromagnetic environment, most existing methods have poor performance to identify different modulation types in low signal-to-noise ratio (SNR). This paper proposes an automatic recognition method for different LPI radar signal modulations. Firstly, time-domain signals are converted to time-frequency images (TFIs) by smooth pseudo-Wigner–Ville distribution. Then, these TFIs are fed into a designed triplet convolutional neural network (TCNN) to obtain high-dimensional feature vectors. In essence, TCNN is a CNN network that triplet loss is adopted to optimize parameters of the network in the training process. The participation of triplet loss can ensure that the distance between samples in different classes is greater than that between samples with the same label, improving the discriminability of TCNN. Eventually, a fully connected neural network is employed as the classifier to recognize different modulation types. Simulation shows that the overall recognition success rate can achieve 94% at − 10 dB, which proves the proposed method has a strong discriminating capability for the recognition of different LPI radar signal modulations, even under low SNR.

scholarly journals Radar Signal Modulation Recognition Based on Sep-ResNet

Sensors ◽  
2021 ◽  
Vol 21 (22) ◽  
pp. 7474
Author(s):  
Yongjiang Mao ◽  
Wenjuan Ren ◽  
Zhanpeng Yang
Keyword(s):  
Neural Network ◽  
Deep Neural Network ◽  
Signal To Noise Ratio ◽  
Morphological Processing ◽  
Radar Signal ◽  
Modulation Recognition ◽  
Time Frequency ◽  
Low Snr ◽  
Modulated Signals ◽  
Intelligent Recognition

With the development of signal processing technology and the use of new radar systems, signal aliasing and electronic interference have occurred in space. The electromagnetic signals have become extremely complicated in their current applications in space, causing difficult problems in terms of accurately identifying radar-modulated signals in low signal-to-noise ratio (SNR) environments. To address this problem, in this paper, we propose an intelligent recognition method that combines time–frequency (T–F) analysis and a deep neural network to identify radar modulation signals. The T–F analysis of the complex Morlet wavelet transform (CMWT) method is used to extract the characteristics of signals and obtain the T–F images. Adaptive filtering and morphological processing are used in T–F image enhancement to reduce the interference of noise on signal characteristics. A deep neural network with the channel-separable ResNet (Sep-ResNet) is used to classify enhanced T–F images. The proposed method completes high-accuracy intelligent recognition of radar-modulated signals in a low-SNR environment. When the SNR is −10 dB, the probability of successful recognition (PSR) is 93.44%.

scholarly journals Automatic ECG Classification Using Continuous Wavelet Transform and Convolutional Neural Network

Entropy ◽  
2021 ◽  
Vol 23 (1) ◽  
pp. 119
Author(s):  
Tao Wang ◽  
Changhua Lu ◽  
Yining Sun ◽  
Mei Yang ◽  
Chun Liu ◽  
...  
Keyword(s):  
Neural Network ◽  
Wavelet Transform ◽  
Convolutional Neural Network ◽  
Continuous Wavelet Transform ◽  
Continuous Wavelet ◽  
Time Frequency ◽  
Ecg Signals ◽  
Rr Interval ◽  
Frequency Components ◽  
Fully Connected

Early detection of arrhythmia and effective treatment can prevent deaths caused by cardiovascular disease (CVD). In clinical practice, the diagnosis is made by checking the electrocardiogram (ECG) beat-by-beat, but this is usually time-consuming and laborious. In the paper, we propose an automatic ECG classification method based on Continuous Wavelet Transform (CWT) and Convolutional Neural Network (CNN). CWT is used to decompose ECG signals to obtain different time-frequency components, and CNN is used to extract features from the 2D-scalogram composed of the above time-frequency components. Considering the surrounding R peak interval (also called RR interval) is also useful for the diagnosis of arrhythmia, four RR interval features are extracted and combined with the CNN features to input into a fully connected layer for ECG classification. By testing in the MIT-BIH arrhythmia database, our method achieves an overall performance of 70.75%, 67.47%, 68.76%, and 98.74% for positive predictive value, sensitivity, F1-score, and accuracy, respectively. Compared with existing methods, the overall F1-score of our method is increased by 4.75~16.85%. Because our method is simple and highly accurate, it can potentially be used as a clinical auxiliary diagnostic tool.

scholarly journals A Radar Signal Recognition Approach via IIF-Net Deep Learning Models

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Ji Li ◽  
Huiqiang Zhang ◽  
Jianping Ou ◽  
Wei Wang
Keyword(s):  
Recognition Accuracy ◽  
Signal To Noise Ratio ◽  
Recognition Rate ◽  
Software Radio ◽  
Radar Signal ◽  
Signal Recognition ◽  
Electromagnetic Environment ◽  
Time Frequency ◽  
Low Snr ◽  
Radar Signals

In the increasingly complex electromagnetic environment of modern battlefields, how to quickly and accurately identify radar signals is a hotspot in the field of electronic countermeasures. In this paper, USRP N210, USRP-LW N210, and other general software radio peripherals are used to simulate the transmitting and receiving process of radar signals, and a total of 8 radar signals, namely, Barker, Frank, chaotic, P1, P2, P3, P4, and OFDM, are produced. The signal obtains time-frequency images (TFIs) through the Choi–Williams distribution function (CWD). According to the characteristics of the radar signal TFI, a global feature balance extraction module (GFBE) is designed. Then, a new IIF-Net convolutional neural network with fewer network parameters and less computation cost has been proposed. The signal-to-noise ratio (SNR) range is −10 to 6 dB in the experiments. The experiments show that when the SNR is higher than −2 dB, the signal recognition rate of IIF-Net is as high as 99.74%, and the signal recognition accuracy is still 92.36% when the SNR is −10 dB. Compared with other methods, IIF-Net has higher recognition rate and better robustness under low SNR.

scholarly journals Classification of Heart Sounds Using Convolutional Neural Network

2020 ◽  
Vol 10 (11) ◽  
pp. 3956 ◽  
Author(s):  
Fan Li ◽  
Hong Tang ◽  
Shang Shang ◽  
Klaus Mathiak ◽  
Fengyu Cong
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Signal To Noise Ratio ◽  
Class Imbalance ◽  
Heart Sounds ◽  
Feature Maps ◽  
Objective Classification ◽  
Sensitivity Specificity ◽  
Fully Connected

Heart sounds play an important role in the diagnosis of cardiac conditions. Due to the low signal-to-noise ratio (SNR), it is problematic and time-consuming for experts to discriminate different kinds of heart sounds. Thus, objective classification of heart sounds is essential. In this study, we combined a conventional feature engineering method with deep learning algorithms to automatically classify normal and abnormal heart sounds. First, 497 features were extracted from eight domains. Then, we fed these features into the designed convolutional neural network (CNN), in which the fully connected layers that are usually used before the classification layer were replaced with a global average pooling layer to obtain global information about the feature maps and avoid overfitting. Considering the class imbalance, the class weights were set in the loss function during the training process to improve the classification algorithm’s performance. Stratified five-fold cross-validation was used to evaluate the performance of the proposed method. The mean accuracy, sensitivity, specificity and Matthews correlation coefficient observed on the PhysioNet/CinC Challenge 2016 dataset were 86.8%, 87%, 86.6% and 72.1% respectively. The proposed algorithm’s performance achieves an appropriate trade-off between sensitivity and specificity.

scholarly journals Detection of Polyphase Codes Radar Signals in Low SNR

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Runlan Tian ◽  
Guoyi Zhang ◽  
Rui Zhou ◽  
Wei Dong
Keyword(s):  
Hough Transform ◽  
Signal To Noise Ratio ◽  
Superior Performance ◽  
Radar Signal ◽  
Time Frequency ◽  
Low Snr ◽  
Radar Signals ◽  
Core Idea ◽  
Code Type ◽  
Electronic Intelligence

A novel effective detection method is proposed for electronic intelligence (ELINT) systems detecting polyphase codes radar signal in the low signal-to-noise ratio (SNR) scenario. The core idea of the proposed method is first to calculate the time-frequency distribution of polyphase codes radar signals via Wigner-Ville distribution (WVD); then the modified Hough transform (HT) is employed to cumulate all the energy of WVD’s ridges effectively to achieve signal detection. Compared with the generalised Wigner Hough transform (GWHT) method, the proposed method has a superior performance in low SNR and is not sensitive to the code type. Simulation results verify the validity of the proposed method.

KLASIFIKASI CITRA GENUS PANTHERA MENGGUNAKAN METODE CONVOLUTIONAL NEURAL NETWORK (CNN)

2019 ◽  
Vol 24 (3) ◽  
pp. 220-228
Author(s):  
Gusti Alfahmi Anwar ◽  
Desti Riminarsih
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Network Model ◽  
Neural Network Model ◽  
Input Layer ◽  
Fully Connected

Panthera merupakan genus dari keluarga kucing yang memiliki empat spesies popular yaitu, harimau, jaguar, macan tutul, singa. Singa memiliki warna keemasan dan tidak memilki motif, harimau memiliki motif loreng dengan garis-garis panjang, jaguar memiliki tubuh yang lebih besar dari pada macan tutul serta memiliki motif tutul yang lebih lebar, sedangkan macan tutul memiliki tubuh yang sedikit lebih ramping dari pada jaguar dan memiliki tutul yang tidak terlalu lebar. Pada penelitian ini dilakukan klasifikasi genus panther yaitu harimau, jaguar, macan tutul, dan singa menggunakan metode Convolutional Neural Network. Model Convolutional Neural Network yang digunakan memiliki 1 input layer, 5 convolution layer, dan 2 fully connected layer. Dataset yang digunakan berupa citra harimau, jaguar, macan tutul, dan singa. Data training terdiri dari 3840 citra, data validasi sebanyak 960 citra, dan data testing sebanyak 800 citra. Hasil akurasi dari pelatihan model untuk training yaitu 92,31% dan validasi yaitu 81,88%, pengujian model menggunakan dataset testing mendapatan hasil 68%. Hasil akurasi prediksi didapatkan dari nilai F1-Score pada pengujian didapatkan sebesar 78% untuk harimau, 70% untuk jaguar, 37% untuk macan tutul, 74% untuk singa. Macan tutul mendapatkan akurasi terendah dibandingkan 3 hewan lainnya tetapi lebih baik dibandingkan hasil penelitian sebelumnya.

scholarly journals Bearing Fault Classification Using Ensemble Empirical Mode Decomposition and Convolutional Neural Network

Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1248
Author(s):  
Rafia Nishat Toma ◽  
Cheol-Hong Kim ◽  
Jong-Myon Kim
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Empirical Mode Decomposition ◽  
Vibration Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Fault Classification ◽  
Original Signal ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Reconstructed Signal

Condition monitoring is used to track the unavoidable phases of rolling element bearings in an induction motor (IM) to ensure reliable operation in domestic and industrial machinery. The convolutional neural network (CNN) has been used as an effective tool to recognize and classify multiple rolling bearing faults in recent times. Due to the nonlinear and nonstationary nature of vibration signals, it is quite difficult to achieve high classification accuracy when directly using the original signal as the input of a convolution neural network. To evaluate the fault characteristics, ensemble empirical mode decomposition (EEMD) is implemented to decompose the signal into multiple intrinsic mode functions (IMFs) in this work. Then, based on the kurtosis value, insignificant IMFs are filtered out and the original signal is reconstructed with the rest of the IMFs so that the reconstructed signal contains the fault characteristics. After that, the 1-D reconstructed vibration signal is converted into a 2-D image using a continuous wavelet transform with information from the damage frequency band. This also transfers the signal into a time-frequency domain and reduces the nonstationary effects of the vibration signal. Finally, the generated images of various fault conditions, which possess a discriminative pattern relative to the types of faults, are used to train an appropriate CNN model. Additionally, with the reconstructed signal, two different methods are used to create an image to compare with our proposed image creation approach. The vibration signal is collected from a self-designed testbed containing multiple bearings of different fault conditions. Two other conventional CNN architectures are compared with our proposed model. Based on the results obtained, it can be concluded that the image generated with fault signatures not only accurately classifies multiple faults with CNN but can also be considered as a reliable and stable method for the diagnosis of fault bearings.

Coal gangue recognition using multichannel auditory spectrogram of hydraulic support sound in convolutional neural network

2021 ◽  
Author(s):  
xu chen ◽  
Shibo Wang ◽  
Houguang Liu ◽  
Jianhua Yang ◽  
Songyong Liu ◽  
...  
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Spectral Characteristics ◽  
Coal Gangue ◽  
Hydraulic Support ◽  
Practical Applications ◽  
Network Training ◽  
Auditory Recognition ◽  
Auditory Signals ◽  
Fully Connected

Abstract Many data-driven coal gangue recognition (CGR) methods based on the vibration or sound of collapsed coal and gangue have been proposed to achieve automatic CGR, which is important for realizing intelligent top-coal caving. However, the strong background noise and complex environment in underground coal mines render this task challenging in practical applications. Inspired by the fact that workers distinguish coal and gangue from underground noise by listening to the hydraulic support sound, we propose an auditory model based CGR method that simulates human auditory recognition by combining an auditory spectrogram with a convolutional neural network (CNN). First, we adjust the characteristic frequency (CF) distribution of the auditory peripheral model (APM) based on the spectral characteristics of collapsed sound signals from coal and gangue and then process the sound signals using the adjusted APM to obtain inferior colliculus auditory signals with multiple CFs. Subsequently, the auditory signals of all CFs are converted into gray images separately and then concatenated into a multichannel auditory spectrum along the channel dimension. Finally, we input the multichannel auditory spectrum as a feature map to the two-dimensional CNN, whose convolutional layers are used to automatically extract features, and the fully connected layer and softmax layer are used to flatten features and predict the recognition result, respectively. The CNN is optimized for the CGR based on a comparison study of four typical types of CNN structures with different network training hyperparameters. The experimental results show that this method affords an accurate CGR with a recognition accuracy of 99.5%. Moreover, this method offers excellent noise immunity compared with typically used CGR methods under various noisy conditions.

Sign in / Sign up

Export Citation Format

Share Document