scholarly journals The untapped industrial crop, Cucumeropsis mannii: dry oil extraction, characterization and potential use as biodiesel feedstock and heavy metal sink

2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Onyeka Stanislaus Okwundu ◽  
Chimezie John Chiama ◽  
Chinedu James Chiama ◽  
Pius Charles Ucheagwu ◽  
Ekene Kingsley Uzoma ◽  
...  

AbstractDue to the quest to meet a basic need – food, vast potentials of numerous African crops have remained unexplored. Cucumeropsis mannii, an invaluable West African melon, is cultivated for its edible proteinous oil-rich seeds. Here, we report for the first time, its potential use for biodiesel production over an uncommon heterogeneous nanocatalyst, and for wastewater treatment. An identification of the untapped species’ seed was made, for disambiguation. Oil (CMO) was expressed from the C. mannii seeds (CMS) and characterized. The CMS was found composed of 53.5% lipids, while 46.1% of the full-fat CMS flour was recovered as vegetable oil. Transesterification experiments were performed using a specially-prepared heterogeneous nanocatalyst derived from Eobania vermiculata shells, by varying successively: methanol/oil ratio, temperature, and reaction time. Maximum biodiesel (CMOME) yield of 86.2% was achieved at catalyst concentration of 5.4%, methanol to oil molar ratio of 9:1, reaction temperature of 60 °C, after 3 h of reaction. Furthermore, part of the polyunsaturated CMO was sulphur-functionalized and utilized at different dosage levels for extraction of Ag+ from 600 to 1500 ppm simulated water. The modified CMO exhibited desirable sorption properties – sinking 100% of Ag+ from 900 ppm water, after 7-h-phase-contact at 6.9 g (20 mL)− 1 dosage. Stagewise operation (multi-staging) was found capable of improving the extraction efficiency in highly concentrated wastewater. Although CMOME conformed to EN-14214 and ASTM D-6751 standards, it had low oxidation stability; making wastewater treatment a more faithful application. Regarding the crop’s food value, residual CMS cake remained edible, even with longer shelf-life (relative to the full-fat flour) – encouraging commercial flour-defattening and consequent availability of CMO for industrial applications. Lastly, it was concluded (with some relevant recommendations) that CMO has great potentials for use as biodiesel feedstock and as heavy metal removal agent.

Author(s):  
Tehseen Yaseen ◽  
Anum Yaseen

Nanotechnology is the area of nano science that shows great potential to establish a new process for wastewater treatment. It has been applied on a nanometer scale level. Currently, limited water resources and real treatment of wastewater is a chief requirement for the growing economy. It is in great demand to introduce the progressive wastewater treatment technologies. Therefore, the modern innovative processes in nanomaterial sciences have been appealing the target of scientists. The chapter addresses the developments in nanotechnology with respect to wastewater treatment, especially the removal of heavy metals and to the environmental applications. It will discuss the application of different classes of nanomaterials for wastewater treatment in removal of heavy metals and its possible effects to the environment. Therefore, the scope is to offer an overview of how nanomaterials are causing concerns related to heavy metal removal for water and in the surrounding environment.


2020 ◽  
Vol 4 (2) ◽  
pp. 1-5
Author(s):  
Al Bazedi GA

Nowadays, undisputable environmental pollution requests endeavors to treat wastewater, particularly containing heavy metal, where wastewater treatment technologies are improving hastily. Hydroxyapatite with micro-porous structure and the large surface area turns into an intense research topic as of its high adsorption capacity. Environmentally friendly Hydroxyapatite powder with the large specific surface is a promising cost-effective precipitation method, for the removal of heavy metals (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) from wastewater. Different studies have revealed the efficient removal of all metals using hydroxyapatite or by modified HA using zeolite or chitosan. The increase of Ca2+ ions content in the treated water suggests an ion exchange mechanism


2012 ◽  
Vol 44 ◽  
pp. 102-110 ◽  
Author(s):  
Christian B. Sekomo ◽  
Diederik P.L. Rousseau ◽  
Saleh A. Saleh ◽  
Piet N.L. Lens

2020 ◽  
Vol 6 (2) ◽  
pp. 258-282 ◽  
Author(s):  
Raylin Chen ◽  
Thomas Sheehan ◽  
Jing Lian Ng ◽  
Matthew Brucks ◽  
Xiao Su

Electrosorption and capacitive deionization technologies can be effective processes in removing heavy metal for water purification, wastewater treatment, resource recovery, and environmental remediation.


RSC Advances ◽  
2019 ◽  
Vol 9 (64) ◽  
pp. 37403-37414 ◽  
Author(s):  
Ali Bilgiç ◽  
Aysel Çimen

Use of a newly synthesized Si-CPTS-AHAP adsorbent in the removal of Cr(vi) ions in wastewater treatment systems may potentially lead to low cost and highly efficient heavy metal removal.


2012 ◽  
Vol 178-181 ◽  
pp. 507-511
Author(s):  
Zhi Min Zhang

The concentration of heavy metals in excess sludge from municipal wastewater treatment plants has restricted its convertion to soil fertilizer, so it is necessary to remove the heavy metals from sludge. In this article, the effects of heavy metal removal by some mineral acids such as HCl, H2SO4, H3PO4, HNO3 were analysed, when treating excess sludge from a second sediment tank in municipal wastewater treatment plants. To improve the treatment, a combination of H2O2 and acid was also investigated. Consequently, the difference of heavy metal removal among those acids was showed. Its removal of Hg by HNO3 was better than by other acids. Lower pH enhanced the dissolving of heavy metal, yet the removal of Cr was insensitive to the pH. Aided by H2O2, the removal by the acid was enhanced. The suitable dosage of H2O2 was specially related to the solid content of sludge, pH and the acid kind.


Sign in / Sign up

Export Citation Format

Share Document