Geophysical Activity in 1978

Geophysics ◽  
1979 ◽  
Vol 44 (10) ◽  
pp. 1740-1754 ◽  
Author(s):  
M. G. Whitmire

This report presents statiscal data on worldwide geophysical activity in 1978. These data were compiled from survey questionaires that were completed by more than 500 companies, contractors, government agencies, and institutions located throughout the free world. We have attempted to gather information from users of geophysical techniques in the areas of petroleum, mining, geothermal, and groundwater exploration; and from those who employ geophysical methods in engineering, oceanography, and research. Information was gathered on airborne, drilled hole, land, and marine geophysical surveys. Statistics were compiled on miles of coverage and acquisition cost. Data not supplied on the questionnaires for cost and line‐miles were estimated on the basis of massive statistical averages for the area and technique reported. This process is necessary to avoid distortion of individual statistical items.

Geophysics ◽  
1980 ◽  
Vol 45 (10) ◽  
pp. 1563-1579 ◽  
Author(s):  
M. G. Whitmire

This report presents statistical data on geophysical activity in 1979. The data were compiled from survey questionnaires that were completed by more than 500 companies, contractors, government agencies, and institutions throughout the free world. We have gathered information from users of geophysical techniques in the areas of petroleum, mining, geothermal, and groundwater exploration; and from those who employ geophysical methods in engineering surveys, oceanography, and research. Data were gathered on airborne, drill hole, land, and marine geophysical surveys. Statistics were compiled on miles of coverage, drill hole footage, time spent in crew months or man months, and acquisition cost.


Geophysics ◽  
1976 ◽  
Vol 41 (4) ◽  
pp. 780-794 ◽  
Author(s):  
H. R. Espey

This report provides statistics on worldwide use of geophysical methods in 1975. Data were obtained primarily through a survey questionnaire which was mailed out to more than 1500 companies, government agencies, and universities that use geophysical techniques for petroleum exploration, oceanography, engineering, mining, geothermal exploration, and groundwater exploration. Response to the survey was excellent and provided detailed information on more than 2100 geophysical surveys. Data on unit costs, methods used, and line‐miles covered are believed to be more accurate this year as a result of better cooperation from industry in filling out the questionnaires. Computer processing was utilized in tabulating the statistics to provide increased accuracy and detail. Data not supplied on the questionnaire for costs or line mileage were estimated on the basis of worldwide averages to produce a more comprehensive report.


Geophysics ◽  
1981 ◽  
Vol 46 (9) ◽  
pp. 1316-1333 ◽  
Author(s):  
Russell J. Senti

Statistical data on geophysical activity in 1980 are gathered from two survey questionnaires mailed to more than 500 companies, contractors, government agencies, and institutions throughout the free world. One questionnaire was the original form which was designed primarily for reporting petroleum activities, and the other, an alternate form, was designed to facilitate reporting of nonpetroleum geophysical activities. We have attempted to gather data from all users of geophysical techniques in the areas of petroleum, mining, geothermal, and groundwater exploration and from those who employ geophysical methods in engineering, oceanography, and research. In general, response to the survey was good. However, we feel that there are new users of geophysical methods we are not reaching. If you did not receive our 1980 questionnaires, please let me know so we can include you on our mailing list for 1981. (As always, data submitted by individual organizations are held strictly confidential.)


Geophysics ◽  
1977 ◽  
Vol 42 (5) ◽  
pp. 1070-1084 ◽  
Author(s):  
H. R. Espey

This report provides statistics on worldwide use of geophysical methods in 1976. Data were obtained primarily through a survey questionnaire which was mailed out to more than 500 companies, government agencies, and universities that use geophysical techniques for petroleum exploration, oceanography, engineering, mining, geothermal exploration, and groundwater exploration. Response to the survey was excellent, providing detailed information on all types of airborne, land, and marine surveys. Computer processing was utilized in tabulating the statistics to provide detailed information on methods used, line‐miles covered, and average costs. Data not supplied on the questionnaire for costs or line‐mileage were estimated on the basis of worldwide averages to produce a more comprehensive report.


Geophysics ◽  
1978 ◽  
Vol 43 (6) ◽  
pp. 1277-1291 ◽  
Author(s):  
M. G. Whitmire

This report provides worldwide statistical data on geophysical activity in 1977. The primary source of information was a survey questionnaire that was mailed to more than 500 companies, contractors, government agencies, and universities. We have attempted to gather data from all users of geophysical methods in the areas of petroleum, minerals, geothermal, and groundwater exploration; and from those who employ geophysical techniques in engineering, oceanography, and research. In general, response to the survey was good. Detailed information was collected on airborne, drill hole, land, and marine surveys. Statistics were compiled on miles of coverage and acquisition cost. Data not supplied on the questionnaires for cost and line miles were estimated on the basis of worldwide averages to minimize distortion of individual statistical items.


2005 ◽  
Vol 42 (4) ◽  
pp. 1105-1115 ◽  
Author(s):  
O Meric ◽  
S Garambois ◽  
D Jongmans ◽  
M Wathelet ◽  
J L Chatelain ◽  
...  

Several geophysical techniques (electromagnetic profiling, electrical tomography, seismic refraction tomography, and spontaneous potential and seismic noise measurement) were applied in the investigation of the large gravitational mass movement of Séchilienne. France. The aim of this study was to test the ability of these methods to characterize and delineate the rock mass affected by this complex movement in mica schists, whose lateral and vertical limits are still uncertain. A major observation of this study is that all the zones strongly deformed (previously and at present) by the movement are characterized by high electrical resistivity values (>3 kΩ·m), in contrast to the undisturbed mass, which exhibits resistivity values between a few hundred and 1 kΩ·m. As shown by the surface observations and the seismic results, this resistivity increase is due to a high degree of fracturing associated with the creation of air-filled voids inside the mass. Other geophysical techniques were tested along a horizontal transect through the movement, and an outstanding coherency appeared between the geophysical anomalies and the displacement rate curve. These preliminary results illustrate the benefits of combined geophysical techniques for characterizing the rock mass involved in the movement. Results also suggest that monitoring the evolution of the rock mass movement with time-lapse geophysical surveys could be beneficial.Key words: gravitational movement, geophysical methods, Séchilienne.


Geophysics ◽  
2001 ◽  
Vol 66 (1) ◽  
pp. 78-89 ◽  
Author(s):  
Donat Demanet ◽  
François Renardy ◽  
Kris Vanneste ◽  
Denis Jongmans ◽  
Thierry Camelbeeck ◽  
...  

As part of a paleoseismological investigation along the Bree fault scarp (western border of the Roer Graben), various geophysical methods [electrical profiling, electromagnetic (EM) profiling, refraction seismic tests, electrical tomography, ground‐penetrating radar (GPR), and high‐resolution reflection seismic profiles] were used to locate and image an active fault zone in a depth range between a few decimeters to a few tens of meters. These geophysical investigations, in parallel with geomorphological and geological analyses, helped in the decision to locate trench excavations exposing the fault surfaces. The results could then be checked with the observations in four trenches excavated across the scarp. Geophysical methods pointed out anomalies at all sites of the fault position. The contrast of physical properties (electrical resistivity and permittivity, seismic velocity) observed between the two fault blocks is a result of a differences in the lithology of the juxtaposed soil layers and of a change in the water table depth across the fault. Extremely fast techniques like electrical and EM profiling or seismic refraction profiles localized the fault position within an accuracy of a few meters. In a second step, more detailed methods (electrical tomography and GPR) more precisely imaged the fault zone and revealed some structures that were observed in the trenches. Finally, one high‐resolution reflection seismic profile imaged the displacement of the fault at depths as large as 120 m and filled the gap between classical seismic reflection profiles and the shallow geophysical techniques. Like all geophysical surveys, the quality of the data is strongly dependent on the geologic environment and on the contrast of the physical properties between the juxtaposed formations. The combined use of various geophysical techniques is thus recommended for fault mapping, particularly for a preliminary investigation when the geological context is poorly defined.


2020 ◽  
Vol 25 (3) ◽  
pp. 415-423
Author(s):  
Ahmed Lachhab ◽  
El Mehdi Benyassine ◽  
Mohamed Rouai ◽  
Abdelilah Dekayir ◽  
Jean C. Parisot ◽  
...  

The tailings of Zeida's abandoned mine are found near the city of Midelt, in the middle of the high Moulouya watershed between the Middle and the High Atlas of Morocco. The tailings occupy an area of about 100 ha and are stored either in large mining pit lakes with clay-marl substratum or directly on a heavily fractured granite bedrock. The high contents of lead and arsenic in these tailings have transformed them into sources of pollution that disperse by wind, runoff, and seepage to the aquifer through faults and fractures. In this work, the main goal is to identify the pathways of contaminated water with heavy metals and arsenic to the local aquifers, water ponds, and Moulouya River. For this reason, geophysical surveys including electrical resistivity tomography (ERT), seismic refraction tomography (SRT) and very low-frequency electromagnetic (VLF-EM) methods were carried out over the tailings, and directly on the substratum outside the tailings. The result obtained from combining these methods has shown that pollutants were funneled through fractures, faults, and subsurface paleochannels and contaminated the hydrological system connecting groundwater, ponds, and the river. The ERT profiles have successfully shown the location of fractures, some of which extend throughout the upper formation to depths reaching the granite. The ERT was not successful in identifying fractures directly beneath the tailings due to their low resistivity which inhibits electrical current from propagating deeper. The seismic refraction surveys have provided valuable details on the local geology, and clearly identified the thickness of the tailings and explicitly marked the boundary between the Triassic formation and the granite. It also aided in the identification of paleochannels. The tailings materials were easily identified by both their low resistivity and low P-wave velocity values. Also, both resistivity and seismic velocity values rapidly increased beneath the tailings due to the compaction of the material and lack of moisture and have proven to be effective in identifying the upper limit of the granite. Faults were found to lie along the bottom of paleochannels, which suggest that the locations of these channels were caused by these same faults. The VLF-EM surveys have shown tilt angle anomalies over fractured areas which were also evinced by low resistivity area in ERT profiles. Finally, this study showed that the three geophysical methods were complementary and in good agreement in revealing the pathways of contamination from the tailings to the local aquifer, nearby ponds and Moulouya River.


2000 ◽  
Vol 31 ◽  
pp. 300-306 ◽  
Author(s):  
Daniel S. Vonder Mühll ◽  
Christian Hauck ◽  
Frank Lehmann

AbstractAt two permafrost sites in the Swiss Alps a range of geophysical methods were applied to model the structure of the subsurface. At both sites, borehole information was used to verify the quality of the model results. On the Murtèl-Corvatsch rock glacier (2700 m a.s.L; upper Engadine) a 58 m deep core drilling was performed in 1987. D. c resistivity measurements, refraction seismics, ground-penetrating radar (GPR) and gravimetric surveys allowed the shape of the permafrost table beneath the marked surface microtopography to be determined and the lateral extent of a deeper shear horizon to be established The validity of each method was verified by the borehole information (cores, density log and temperature). A coherent model of the rock-glacier structure was developed. At the Schilthorn (2970 m a.s.L; Bernese Oberland), it was not clear whether permafrost is in fact present. Various geophysical surveys (d.c. resistivity tomography, refraction seismics, GPR and EM-31) gave results that were not typical of permafrost environments. A 14 m percussion drilling revealed warm permafrost and a very low ice content. These geotechnical and geothermal data allowed reinterpretation of the geophysical results, improving modelling of ground conditions. The paper demonstrates that in the difficult terrain of Alpine permafrost, boreholes may be critical in calibration and verification of the results of geophysical methods. The most useful combinations of geophysical techniques proved to be (a) seismics with d.c. resistivity, and (b) gravimetry with GPR.


Sign in / Sign up

Export Citation Format

Share Document