Source-free converted-wave reverse time migration: Formulation and limitations

Geophysics ◽  
2019 ◽  
Vol 84 (1) ◽  
pp. S17-S27 ◽  
Author(s):  
Yue Du ◽  
Yunyue Elita Li ◽  
Jizhong Yang ◽  
Arthur Cheng ◽  
Xinding Fang
Keyword(s):  
Wave Equations ◽  
Mode Conversion ◽  
Objective Functions ◽  
Source Information ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Converted Wave ◽  
Imaging Condition ◽  
Time Migration ◽  
Elastic Wave Equations

The source-free converted-wave (SFCW) reverse time migration is an alternative way to image the subsurface when the source information is missing or the overburden velocities are complex. However, it is challenging due to the lack of source-wavefield constraints. We have derived the SFCW imaging condition from the first gradients of waveform matching objective functions using a set of coupled P- and S-potential equations and small-perturbation approximations. We found that the images obtained from this SFCW imaging condition are second-order approximations to the shear-modulus perturbations. The images produced by the proposed imaging condition are free of the polarity reversal effects and have clear physical meanings. We also find that the acoustic wave equations can be used to back propagate the recorded P- and S-potentials, and the resulting images have the same kinematic accuracy and fewer unphysical mode-conversion artifacts than the SFCW images obtained by the elastic wave equations. Using multiple numerical examples, we determine the accuracy of our formulations, analyze the resolution and artifacts on the resulting images, and develop the limitations of the proposed method.

scholarly journals Elastic-wave reverse-time migration based on decoupled elastic-wave equations and inner-product imaging condition

2016 ◽  
Vol 13 (6) ◽  
pp. 953-963 ◽  
Author(s):  
Peng Yong ◽  
Jianping Huang ◽  
Zhenchun Li ◽  
Wenyuan Liao ◽  
Luping Qu ◽  
...  
Keyword(s):  
Elastic Wave ◽  
Wave Equations ◽  
Inner Product ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Imaging Condition ◽  
Time Migration ◽  
Elastic Wave Equations

Vector-based elastic reverse time migration based on scalar imaging condition

Geophysics ◽  
2017 ◽  
Vol 82 (2) ◽  
pp. S111-S127 ◽  
Author(s):  
Qizhen Du ◽  
ChengFeng Guo ◽  
Qiang Zhao ◽  
Xufei Gong ◽  
Chengxiang Wang ◽  
...  
Keyword(s):  
Alternative Methods ◽  
Polarity Reversal ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
S Wave ◽  
Converted Wave ◽  
Imaging Condition ◽  
Time Migration ◽  
Wavefield Separation ◽  
Wave Modes

The scalar images (PP, PS, SP, and SS) of elastic reverse time migration (ERTM) can be generated by applying an imaging condition as crosscorrelation of pure wave modes. In conventional ERTM, Helmholtz decomposition is commonly applied in wavefield separation, which leads to a polarity reversal problem in converted-wave images because of the opposite polarity distributions of the S-wavefields. Polarity reversal of the converted-wave image will cause destructive interference when stacking over multiple shots. Besides, in the 3D case, the curl calculation generates a vector S-wave, which makes it impossible to produce scalar PS, SP, and SS images with the crosscorrelation imaging condition. We evaluate a vector-based ERTM (VB-ERTM) method to address these problems. In VB-ERTM, an amplitude-preserved wavefield separation method based on decoupled elastic wave equation is exploited to obtain the pure wave modes. The output separated wavefields are both vectorial. To obtain the scalar images, the scalar imaging condition in which the scalar product of two vector wavefields with source-normalized illumination is exploited to produce scalar images instead of correlating Cartesian components or magnitude of the vector P- and S-wave modes. Compared with alternative methods for correcting the polarity reversal of PS and SP images, our ERTM solution is more stable and simple. Besides these four scalar images, the VB-ERTM method generates another PP-mode image by using the auxiliary stress wavefields. Several 2D and 3D numerical examples are evaluated to demonstrate the potential of our ERTM method.

Elastic reverse time migration using acoustic propagators

Geophysics ◽  
2018 ◽  
Vol 83 (5) ◽  
pp. S399-S408 ◽  
Author(s):  
Yunyue Elita Li ◽  
Yue Du ◽  
Jizhong Yang ◽  
Arthur Cheng ◽  
Xinding Fang
Keyword(s):  
Wave Equations ◽  
Mode Conversion ◽  
Computational Cost ◽  
Body Waves ◽  
Constant Density ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
S Wave ◽  
Isotropic Constant ◽  
Time Migration

Elastic wave imaging has been a significant challenge in the exploration industry due to the complexities in wave physics and numerical implementation. We have separated the governing equations for P- and S-wave propagation without the assumptions of homogeneous Lamé parameters to capture the mode conversion between the two body waves in an isotropic, constant-density medium. The resulting set of two coupled second-order equations for P- and S-potentials clearly demonstrates that mode conversion only occurs at the discontinuities of the shear modulus. Applying the Born approximation to the new equations, we derive the PP, PS, SP, and SS imaging conditions from the first gradients of waveform matching objective functions. The resulting images are consistent with the physical perturbations of the elastic parameters, and, hence, they are automatically free of the polarity reversal artifacts in the converted images. When implementing elastic reverse time migration (RTM), we find that scalar wave equations can be used to back propagate the recorded P-potential, as well as individual components in the vector field of the S-potential. Compared with conventional elastic RTM, the proposed elastic RTM implementation using acoustic propagators not only simplifies the imaging condition, it but also reduces the computational cost and the artifacts in the images. We have determined the accuracy of our method using 2D and 3D numerical examples.

Converted-wave guided imaging condition for elastic reverse time migration with wavefield separation

2017 ◽  
Vol 48 (3) ◽  
pp. 201-209 ◽  
Author(s):  
Hyungwook Choi ◽  
Soon Jee Seol ◽  
Joongmoo Byun
Keyword(s):  
Reverse Time ◽  
Reverse Time Migration ◽  
Converted Wave ◽  
Imaging Condition ◽  
Time Migration ◽  
Wavefield Separation

Reducing artifacts of elastic reverse time migration by the deprimary technique

Geophysics ◽  
2018 ◽  
Vol 83 (6) ◽  
pp. S569-S577 ◽  
Author(s):  
Yang Zhao ◽  
Houzhu Zhang ◽  
Jidong Yang ◽  
Tong Fei
Keyword(s):  
Complex Function ◽  
Noise Removal ◽  
Pure Mode ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
S Wave ◽  
Imaging Condition ◽  
Velocity Models ◽  
Time Migration ◽  
Wavefield Decomposition

Using the two-way elastic-wave equation, elastic reverse time migration (ERTM) is superior to acoustic RTM because ERTM can handle mode conversions and S-wave propagations in complex realistic subsurface. However, ERTM results may not only contain classical backscattering noises, but they may also suffer from false images associated with primary P- and S-wave reflections along their nonphysical paths. These false images are produced by specific wave paths in migration velocity models in the presence of sharp interfaces or strong velocity contrasts. We have addressed these issues explicitly by introducing a primary noise removal strategy into ERTM, in which the up- and downgoing waves are efficiently separated from the pure-mode vector P- and S-wavefields during source- and receiver-side wavefield extrapolation. Specifically, we investigate a new method of vector wavefield decomposition, which allows us to produce the same phases and amplitudes for the separated P- and S-wavefields as those of the input elastic wavefields. A complex function involved with the Hilbert transform is used in up- and downgoing wavefield decomposition. Our approach is cost effective and avoids the large storage of wavefield snapshots that is required by the conventional wavefield separation technique. A modified dot-product imaging condition is proposed to produce multicomponent PP-, PS-, SP-, and SS-images. We apply our imaging condition to two synthetic models, and we demonstrate the improvement on the image quality of ERTM.

Imaging conditions for elastic reverse time migration

Geophysics ◽  
2019 ◽  
Vol 84 (2) ◽  
pp. S95-S111 ◽  
Author(s):  
Wei Zhang ◽  
Ying Shi
Keyword(s):  
Decomposition Method ◽  
Inner Product ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
S Wave ◽  
Imaging Condition ◽  
Subsurface Structures ◽  
Time Migration ◽  
Imaging Conditions ◽  
Wave Modes

Elastic reverse time migration (RTM) has the ability to retrieve accurately migrated images of complex subsurface structures by imaging the multicomponent seismic data. However, the imaging condition applied in elastic RTM significantly influences the quality of the migrated images. We evaluated three kinds of imaging conditions in elastic RTM. The first kind of imaging condition involves the crosscorrelation between the Cartesian components of the particle-velocity wavefields to yield migrated images of subsurface structures. An alternative crosscorrelation imaging condition between the separated pure wave modes obtained by a Helmholtz-like decomposition method could produce reflectivity images with explicit physical meaning and fewer crosstalk artifacts. A drawback of this approach, though, was that the polarity reversal of the separated S-wave could cause destructive interference in the converted-wave image after stacking over multiple shots. Unlike the conventional decomposition method, the elastic wavefields can also be decomposed in the vector domain using the decoupled elastic wave equation, which preserves the amplitude and phase information of the original elastic wavefields. We have developed an inner-product imaging condition to match the vector-separated P- and S-wave modes to obtain scalar reflectivity images of the subsurface. Moreover, an auxiliary P-wave stress image can supplement the elastic imaging. Using synthetic examples with a layered model, the Marmousi 2 model, and a fault model, we determined that the inner-product imaging condition has prominent advantages over the other two imaging conditions and generates images with preserved amplitude and phase attributes.

scholarly journals Application of the continuous wavelet transform in the extraction of directional data on RTM imaging condition wavefields

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Juan Guillermo Paniagua Castrillón ◽  
Olga Lucía Quintero- Montoya
Keyword(s):  
Wavelet Transform ◽  
Continuous Wavelet Transform ◽  
Low Frequency ◽  
Continuous Wavelet ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Model Quality ◽  
Directional Information ◽  
Imaging Condition ◽  
Time Migration

Low-frequency artifacts in reverse time migration result from unwanted cross-correlation of the source and receiver wavefields at non-reflecting points along ray-paths. These artifacts can hide important details in migrated models and increase poor interpretation risk. Some methods have been proposed to avoid or reduce the number of these artifacts, preserving reflections, and improving model quality, implementing other strategies such as modification of the wave equation, proposing other imaging conditions, and using image filtering techniques. One of these methods uses wavefield decomposition, correlating components of the wavefields that propagate in opposite directions. We propose a method for extracting directional information from the RTM imaging condition wavefields to obtain characteristics allowing for better, more refined imaging. The method works by separating directional information about the wavefields based on the continuous wavelet transform (CWT), and the analysis of the main changes on the frequency content revealed within the scalogram obtained by a Gaussian wavelet family. Through numerical applications, we demonstrate that this method can effectively remove undesired artifacts in migrated images. In addition, we use the Laguerre-Gauss filtering to improve the results obtained with the proposed method.

Imaging reflection-blind areas using transmitted PS-waves

Geophysics ◽  
2006 ◽  
Vol 71 (6) ◽  
pp. S241-S250 ◽  
Author(s):  
Yi Luo ◽  
Qinglin Liu ◽  
Yuchun E. Wang ◽  
Mohammed N. AlFaraj
Keyword(s):  
Mode Conversion ◽  
Imaging Techniques ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Reflected Waves ◽  
Prestack Migration ◽  
Reflection Data ◽  
Time Migration ◽  
Transmitted Waves ◽  
Vsp Data

We illustrate the use of mode-converted transmitted (e.g., PS- or SP-) waves in vertical seismic profiling (VSP) data for imaging areas above receivers where reflected waves cannot illuminate. Three depth-domain imaging techniques — move-out correction, common-depth-point (CDP) mapping, and prestack migration — are described and used for imag-ing the transmitted waves. Moveout correction converts an offset VSP trace into a zero-offset trace. CDP mapping maps each sample on an input trace to the location where the mode conversion occurs. For complex media, prestack migration (e.g., reverse-time migration) is used. By using both synthetic and field VSP data, we demonstrate that images derived from transmissions complement those from reflections. As an important application, we show that transmitted waves can illuminate zones above highly de-viated or horizontal wells, a region not imaged by reflection data. Because all of these benefits are obtained without extra data acquisition cost, we believe transmission imag-ing techniques will become widely adopted by the oil in-dustry.

Sign in / Sign up

Export Citation Format

Share Document