Velocity model estimation of karstic fault reservoirs using full-waveform inversion accelerated on graphics processing unit

2020 ◽  
Vol 8 (4) ◽  
pp. SP191-SP203
Author(s):  
Ziying Wang ◽  
Jianping Huang ◽  
Zhenchun Li ◽  
Li-Yun Fu ◽  
Wenqiang Luo ◽  
...  
Keyword(s):  
High Precision ◽  
Graphics Processing Unit ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Carbonate Reservoir ◽  
Processing Unit ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Seismic Image ◽  
Graphics Processing

The karstic fault reservoir is a type of hydrocarbon-enriched carbonate reservoir. It is a combination of small-scale caves, vugs, and fractures developing near deep-seated faults, which makes it difficult to delineate using traditional seismic imaging methods. Recent research on geologic characteristics of paleokarst reservoirs facilitates hydrocarbon exploration and exploitation in western China. To interpret karstic fault systems and reservoirs, the seismic image is an effective tool. A high-quality velocity model is essential for high-resolution migration. These seismic results contain crucial information to interpret reservoirs. Full-waveform inversion (FWI) is a powerful method to obtain high-precision velocity models because it makes use of the kinematic and dynamic information in the seismic full wavefield. To image such complicated and irregular fractured-cavity reservoirs accurately, we have applied a multiscale FWI method accelerated on graphics processing unit devices to fault-controlled paleokarst reservoir models. According to the model test results, FWI shows high performance in delineating the boundaries of fault-controlled karstic reservoirs. The proposed method also has the potential to characterize inner structures. Based on the high-precision velocity model provided by FWI, the seismic image obtained by reverse time migration is also improved. These seismic results will show the location, width, and shape of the fault-karst structure, which gives detailed information for fault-controlled paleokarst reservoir interpretation.

A graphics processing unit implementation of time-domain full-waveform inversion

Geophysics ◽  
2015 ◽  
Vol 80 (3) ◽  
pp. F31-F39 ◽  
Author(s):  
Pengliang Yang ◽  
Jinghuai Gao ◽  
Baoli Wang
Keyword(s):  
Time Domain ◽  
Graphics Processing Unit ◽  
Waveform Inversion ◽  
Processing Unit ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Graphics Processing

scholarly journals Optimal coding of blended seismic sources for 2D full waveform inversion in time

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Katherine Flórez ◽  
Sergio Alberto Abreo Carrillo ◽  
Ana Beatriz Ramírez Silva
Keyword(s):  
Waveform Inversion ◽  
Velocity Model ◽  
Computational Time ◽  
Inversion Method ◽  
Single Shot ◽  
Full Waveform Inversion ◽  
Velocity Models ◽  
Full Waveform ◽  
Seismic Image ◽  
Blended Data

Full Waveform Inversion (FWI) schemes are gradually becoming more common in the oil and gas industry, as a new tool for studying complex geological zones, based on their reliability for estimating velocity models. FWI is a non-linear inversion method that iteratively estimates subsurface characteristics such as seismic velocity, starting from an initial velocity model and the preconditioned data acquired. Blended sources have been used in marine seismic acquisitions to reduce acquisition costs, reducing the number of times that the vessel needs to cross the exploration delineation trajectory. When blended or simultaneous without previous de-blending or separation, stage data are used in the reconstruction of the velocity model with the FWI method, and the computational time is reduced. However, blended data implies overlapping single shot-gathers, producing interference that affects the result of seismic approaches, such as FWI or seismic image migration. In this document, an encoding strategy is developed, which reduces the overlap areas within the blended data to improve the final velocity model with the FWI method.

scholarly journals 3D variable-grid full-waveform inversion on GPU

2019 ◽  
Vol 16 (5) ◽  
pp. 1001-1014 ◽  
Author(s):  
Zi-Ying Wang ◽  
Jian-Ping Huang ◽  
Ding-Jin Liu ◽  
Zhen-Chun Li ◽  
Peng Yong ◽  
...  
Keyword(s):  
Graphics Processing Unit ◽  
Computing Time ◽  
Waveform Inversion ◽  
3D Models ◽  
Processing Unit ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Wavefield Simulation ◽  
3D Processing ◽  
Processing Techniques

Abstract Full-waveform inversion (FWI) is a powerful tool to reconstruct subsurface geophysical parameters with high resolution. As 3D surveys become widely implemented, corresponding 3D processing techniques are required to solve complex geological cases, while a large amount of computation is the most challenging problem. We propose an adaptive variable-grid 3D FWI on graphics processing unit devices to improve computational efficiency without losing accuracy. The irregular-grid discretization strategy is based on a dispersion relation, and the grid size adapts to depth, velocity, and frequency automatically. According to the transformed grid coordinates, we derive a modified acoustic wave equation and apply it to full wavefield simulation. The 3D variable-grid modeling is conducted on several 3D models to validate its feasibility, accuracy and efficiency. Then we apply the proposed modeling method to full-waveform inversion for source and residual wavefield propagation. It is demonstrated that the adaptive variable-grid FWI is capable of decreasing computing time and memory requirements. From the inversion results of the 3D SEG/EAGE overthrust model, our method retains inversion accuracy when recovering both thrust and channels.

High-resolution depth imaging of long-offset 2D data using full-waveform inversion: The Malvinas Basin, Argentina

2019 ◽  
Vol 38 (3) ◽  
pp. 220-225
Author(s):  
Laurence Letki ◽  
Mike Saunders ◽  
Monica Hoppe ◽  
Milos Cvetkovic ◽  
Lewis Goss ◽  
...  
Keyword(s):  
High Resolution ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Full Waveform Inversion ◽  
Data Set ◽  
Depth Imaging ◽  
Additional Information ◽  
Full Waveform ◽  
Seismic Image ◽  
2D Data

The Argentina Austral Malvinas survey comprises 13,784 km of 2D data extending from the shelf to the border with the Falkland Islands. The survey was acquired using a 12,000 m streamer and continuous recording technology and was processed through a comprehensive broadband prestack depth migration workflow focused on producing a high-resolution, high-fidelity data set. Source- and receiver-side deghosting to maximize the bandwidth of the data was an essential ingredient in the preprocessing. Following the broadband processing sequence, a depth-imaging workflow was implemented, with the initial model built using a time tomography approach. Several passes of anisotropic reflection tomography provided a significant improvement in the velocity model prior to full-waveform inversion (FWI). Using long offsets, FWI made use of additional information contained in the recorded wavefield, including the refracted and diving wave energy. FWI resolved more detailed velocity variations both in the shallow and deeper section and culminated in an improved seismic image.

scholarly journals Full-Waveform Inversion for Imaging Faulted Structures: A Case Study from the Japan Trench Forearc Slope

2021 ◽  
Author(s):  
Ehsan Jamali Hondori ◽  
Chen Guo ◽  
Hitoshi Mikada ◽  
Jin-Oh Park
Keyword(s):  
Seismic Data ◽  
Initial Velocity ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Control Measures ◽  
Japan Trench ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Time Migration ◽  
Shallow Sediments

AbstractFull-waveform inversion (FWI) of limited-offset marine seismic data is a challenging task due to the lack of refracted energy and diving waves from the shallow sediments, which are fundamentally required to update the long-wavelength background velocity model in a tomographic fashion. When these events are absent, a reliable initial velocity model is necessary to ensure that the observed and simulated waveforms kinematically fit within an error of less than half a wavelength to protect the FWI iterative local optimization scheme from cycle skipping. We use a migration-based velocity analysis (MVA) method, including a combination of the layer-stripping approach and iterations of Kirchhoff prestack depth migration (KPSDM), to build an accurate initial velocity model for the FWI application on 2D seismic data with a maximum offset of 5.8 km. The data are acquired in the Japan Trench subduction zone, and we focus on the area where the shallow sediments overlying a highly reflective basement on top of the Cretaceous erosional unconformity are severely faulted and deformed. Despite the limited offsets available in the seismic data, our carefully designed workflow for data preconditioning, initial model building, and waveform inversion provides a velocity model that could improve the depth images down to almost 3.5 km. We present several quality control measures to assess the reliability of the resulting FWI model, including ray path illuminations, sensitivity kernels, reverse time migration (RTM) images, and KPSDM common image gathers. A direct comparison between the FWI and MVA velocity profiles reveals a sharp boundary at the Cretaceous basement interface, a feature that could not be observed in the MVA velocity model. The normal faults caused by the basal erosion of the upper plate in the study area reach the seafloor with evident subsidence of the shallow strata, implying that the faults are active.

A new parameter set for anisotropic multiparameter full-waveform inversion and application to a North Sea data set

Geophysics ◽  
2016 ◽  
Vol 81 (4) ◽  
pp. U25-U38 ◽  
Author(s):  
Nuno V. da Silva ◽  
Andrew Ratcliffe ◽  
Vetle Vinje ◽  
Graham Conroy
Keyword(s):  
North Sea ◽  
Waveform Inversion ◽  
Real Data ◽  
Model Parameters ◽  
Full Waveform Inversion ◽  
Radiation Patterns ◽  
Data Set ◽  
Full Waveform ◽  
Seismic Image ◽  
Central North Sea

Parameterization lies at the center of anisotropic full-waveform inversion (FWI) with multiparameter updates. This is because FWI aims to update the long and short wavelengths of the perturbations. Thus, it is important that the parameterization accommodates this. Recently, there has been an intensive effort to determine the optimal parameterization, centering the fundamental discussion mainly on the analysis of radiation patterns for each one of these parameterizations, and aiming to determine which is best suited for multiparameter inversion. We have developed a new parameterization in the scope of FWI, based on the concept of kinematically equivalent media, as originally proposed in other areas of seismic data analysis. Our analysis is also based on radiation patterns, as well as the relation between the perturbation of this set of parameters and perturbation in traveltime. The radiation pattern reveals that this parameterization combines some of the characteristics of parameterizations with one velocity and two Thomsen’s parameters and parameterizations using two velocities and one Thomsen’s parameter. The study of perturbation of traveltime with perturbation of model parameters shows that the new parameterization is less ambiguous when relating these quantities in comparison with other more commonly used parameterizations. We have concluded that our new parameterization is well-suited for inverting diving waves, which are of paramount importance to carry out practical FWI successfully. We have demonstrated that the new parameterization produces good inversion results with synthetic and real data examples. In the latter case of the real data example from the Central North Sea, the inverted models show good agreement with the geologic structures, leading to an improvement of the seismic image and flatness of the common image gathers.

Pre-Stack Full Waveform Inversion for Velocity Model Building

2011 ◽  
Author(s):  
S. Jerry Kapoor ◽  
Denes Vigh ◽  
Timothy John Bunting
Keyword(s):  
Model Building ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Velocity Model Building

Full-waveform inversion for full-wavefield imaging: Decades in the making

2021 ◽  
Vol 40 (5) ◽  
pp. 324-334
Author(s):  
Rongxin Huang ◽  
Zhigang Zhang ◽  
Zedong Wu ◽  
Zhiyuan Wei ◽  
Jiawei Mei ◽  
...  
Keyword(s):  
Model Building ◽  
Seismic Imaging ◽  
Structural Information ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Data Sets ◽  
Full Waveform Inversion ◽  
Data Types ◽  
Velocity Models ◽  
Full Waveform

Seismic imaging using full-wavefield data that includes primary reflections, transmitted waves, and their multiples has been the holy grail for generations of geophysicists. To be able to use the full-wavefield data effectively requires a forward-modeling process to generate full-wavefield data, an inversion scheme to minimize the difference between modeled and recorded data, and, more importantly, an accurate velocity model to correctly propagate and collapse energy of different wave modes. All of these elements have been embedded in the framework of full-waveform inversion (FWI) since it was proposed three decades ago. However, for a long time, the application of FWI did not find its way into the domain of full-wavefield imaging, mostly owing to the lack of data sets with good constraints to ensure the convergence of inversion, the required compute power to handle large data sets and extend the inversion frequency to the bandwidth needed for imaging, and, most significantly, stable FWI algorithms that could work with different data types in different geologic settings. Recently, with the advancement of high-performance computing and progress in FWI algorithms at tackling issues such as cycle skipping and amplitude mismatch, FWI has found success using different data types in a variety of geologic settings, providing some of the most accurate velocity models for generating significantly improved migration images. Here, we take a step further to modify the FWI workflow to output the subsurface image or reflectivity directly, potentially eliminating the need to go through the time-consuming conventional seismic imaging process that involves preprocessing, velocity model building, and migration. Compared with a conventional migration image, the reflectivity image directly output from FWI often provides additional structural information with better illumination and higher signal-to-noise ratio naturally as a result of many iterations of least-squares fitting of the full-wavefield data.

Multi-parameter model building for the Qiuyue structure using four-component ocean-bottom seismometer data

Geophysics ◽  
2021 ◽  
pp. 1-52
Author(s):  
Yuzhu Liu ◽  
Xinquan Huang ◽  
Jizhong Yang ◽  
Xueyi Liu ◽  
Bin Li ◽  
...  
Keyword(s):  
Wave Velocity ◽  
Waveform Inversion ◽  
Velocity Model ◽  
P Wave ◽  
Velocity Analysis ◽  
Full Waveform Inversion ◽  
Ocean Bottom ◽  
Ocean Bottom Seismometer ◽  
Full Waveform ◽  
P Wave Velocity

Thin sand-mud-coal interbedded layers and multiples caused by shallow water pose great challenges to conventional 3D multi-channel seismic techniques used to detect the deeply buried reservoirs in the Qiuyue field. In 2017, a dense ocean-bottom seismometer (OBS) acquisition program acquired a four-component dataset in East China Sea. To delineate the deep reservoir structures in the Qiuyue field, we applied a full-waveform inversion (FWI) workflow to this dense four-component OBS dataset. After preprocessing, including receiver geometry correction, moveout correction, component rotation, and energy transformation from 3D to 2D, a preconditioned first-arrival traveltime tomography based on an improved scattering integral algorithm is applied to construct an initial P-wave velocity model. To eliminate the influence of the wavelet estimation process, a convolutional-wavefield-based objective function for the preprocessed hydrophone component is used during acoustic FWI. By inverting the waveforms associated with early arrivals, a relatively high-resolution underground P-wave velocity model is obtained, with updates at 2.0 km and 4.7 km depth. Initial S-wave velocity and density models are then constructed based on their prior relationships to the P-wave velocity, accompanied by a reciprocal source-independent elastic full-waveform inversion to refine both velocity models. Compared to a traditional workflow, guided by stacking velocity analysis or migration velocity analysis, and using only the pressure component or other single-component, the workflow presented in this study represents a good approach for inverting the four-component OBS dataset to characterize sub-seafloor velocity structures.

Sign in / Sign up

Export Citation Format

Share Document