Ground Motion Intensity Measures for Rocking Building Systems

2017 ◽  
Vol 33 (4) ◽  
pp. 1533-1554 ◽  
Author(s):  
Mehrdad Shokrabadi ◽  
Henry V. Burton
Keyword(s):  
Ground Motion ◽  
Structural Response ◽  
Ground Acceleration ◽  
Intensity Measures ◽  
Braced Frame ◽  
Residual Drift ◽  
Engineering Demand Parameter ◽  
Frame System ◽  
Ground Motion Records ◽  
Steel Braced Frame

This paper investigates the effectiveness of various ground motion intensity measures (IMs) in estimating the structural response of two types of rocking systems: (a) a controlled rocking steel braced frame system with self-centering action and (b) a rocking spine system for reinforced concrete infill frames. The IMs are evaluated based on the dispersion in engineering demand parameter (EDP) predictions (efficiency) and the sensitivity of the conditional distributions of EDPs to the distributions of the magnitudes, distances and spectral shape parameter (ε) of ground motion records (sufficiency). The EDPs include maximum transient and residual story drifts and peak floor accelerations. The spectral acceleration averaged over a range of periods (Sa avg) is most effective for predicting transient and residual drift demands and peak ground acceleration (PGA) is generally the best predictor of peak floor accelerations. The proximity of the frequency range most affecting an EDP to that best reflected in an IM is found to be a good indicator of the performance of that IM.

scholarly journals Efficiency of Intensity Measures Considering Near- and Far-Fault Ground Motion Records

Geosciences ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 234
Author(s):  
Yeudy F. Vargas-Alzate ◽  
Jorge E. Hurtado
Keyword(s):  
Ground Motion ◽  
High Efficiency ◽  
Fragility Curves ◽  
Nonlinear Dynamic Response ◽  
Intensity Measures ◽  
Engineering Demand Parameter ◽  
Ground Motion Records ◽  
Seismic Response Of Buildings ◽  
Near Fault Ground Motion ◽  
Far Fault

This paper focuses on the identification of high-efficiency intensity measures to predict the seismic response of buildings affected by near- and far-fault ground motion records. Near-fault ground motion has received special attention, as it tends to increase the expected damage to civil structures compared to that from ruptures originating further afield. In order to verify this tendency, the nonlinear dynamic response of 3D multi-degree-of-freedom models is estimated by using a subset of records whose distance to the epicenter is lower than 10 Km. In addition, to quantify how much the expected demand may increase because of the proximity to the fault, another subset of records, whose distance to the epicenter is in the range between 10 and 30 Km, has been analyzed. Then, spectral and energy-based intensity measures as well as those obtained from specific computations of the ground motion record are calculated and correlated to several engineering demand parameters. From these analyses, fragility curves are derived and compared for both subsets of records. It has been observed that the subset of records nearer to the fault tends to produce fragility functions with higher probabilities of exceedance than the ones derived for far-fault records. Results also show that the efficiency of the intensity measures is similar for both subsets of records, but it varies depending on the engineering demand parameter to be predicted.

Improving the torsional response of asymmetric buildings with self-centering controlled rocking steel braced frame system

2022 ◽  
pp. 136943322110509
Author(s):  
Maryam Hafezi ◽  
Armin Aziminejad ◽  
Mohammad Reza Mansoori ◽  
Mahmood Hosseini ◽  
Abdolreza Sarvghad Moghadam
Keyword(s):  
Center Of Mass ◽  
Asymmetric Structure ◽  
Maximum Displacement ◽  
Braced Frame ◽  
Asymmetric Buildings ◽  
Frame System ◽  
Strength And Stiffness ◽  
Ground Motion Records ◽  
Energy Absorbing ◽  
Steel Braced Frame

Self-centering controlled rocking steel braced-frame (SC-CR-SBF) is proposed as an earthquake-resistant system with low damage. Pre-stressed vertical strands provide a self-centering mechanism in the system and energy absorbing fuses restrict maximum displacement. Presence of asymmetry in structures can highlight the advantages of employing this structural system. Moreover, these days designing and constructing asymmetric and irregular structures is inevitable and as a result of architectural attractiveness and requirements of different functions of buildings, they are of great importance. Consequently, in these types of structures in order to minimize seismic responses, particular measures should be taken into consideration. Proper distribution of strength and stiffness throughout the plan of structures with self-centering systems can play a considerable role in resolving problems associated with asymmetry in these structures. In this study, the asymmetric buildings with 10% and 20% mass eccentricities and having different arrangements of centers were simulated. The models were analyzed under a set of 22 bidirectional far-field ground-motion records and corresponding responses of maximum roof drift, acceleration and rotation of the roof diaphragms of the structures with different arrangements of the center of mass, stiffness and strength were computed and studied. Results show that proper distribution of stiffness and strength throughout the plan of the structures with SC-CR-SBF system reduces the maximum roof drift as well as the rotation of the roof diaphragm. With appropriate arrangement of the centers, maximum drift response of the asymmetric structure decreases as much as roughly 20% and the ratio of the maximum drift response of the asymmetric structure to the response of the similar symmetric structure with the same overall stiffness and strength was 1.1. In other words, maximum drift response of the asymmetric structure with SC-CR-SBF system is acceptably close to the one for the symmetric building.

Seismic Hazard Analysis for an NPP Site

2004 ◽  
Author(s):  
A. K. Ghosh ◽  
H. S. Kushwaha
Keyword(s):  
Seismic Hazard ◽  
Ground Motion ◽  
Peak Ground Acceleration ◽  
Hazard Analysis ◽  
Structural Response ◽  
Response Spectra ◽  
Seismic Fragility ◽  
Material Strength ◽  
Ground Acceleration ◽  
Hazard Response

The various uncertainties and randomness associated with the occurrence of earthquakes and the consequences of their effects on the NPP components and structures call for a probabilistic seismic risk assessment (PSRA). However, traditionally, the seismic design basis ground motion has been specified by normalised response spectral shapes and peak ground acceleration (PGA). The mean recurrence interval (MRI) used to be computed for PGA only. The present work develops uniform hazard response spectra i.e. spectra having the same MRI at all frequencies for Kakrapar Atomic Power Station site. Sensitivity of the results to the changes in various parameters has also been presented. These results determine the seismic hazard at the given site and the associated uncertainties. The paper also presents some results of the seismic fragility for an existing containment structure. The various parameters that could affect the seismic structural response include material strength of concrete, structural damping available within the structure and the normalized ground motion response spectral shape. Based on this limited case study the seismic fragility of the structure is developed. The results are presented as families of conditional probability curves plotted against the peak ground acceleration (PGA). The procedure adopted incorporates the various randomness and uncertainty associated with the parameters under consideration.

Empirical Correlations between Generalized Ground-Motion Intensity Measures for Earthquakes in China

2020 ◽  
Author(s):  
Kun Ji ◽  
Yefei Ren ◽  
Ruizhi Wen
Keyword(s):  
Ground Motion ◽  
Correlation Coefficients ◽  
Parametric Models ◽  
Peak Ground Velocity ◽  
Ground Acceleration ◽  
Intensity Measures ◽  
Vibration Period ◽  
Significant Duration ◽  
Cumulative Absolute Velocity ◽  
Spectrum Intensity

ABSTRACT This study used earthquake records from China to investigate comprehensively the correlation coefficients between various intensity measures (IMs), including peak ground acceleration, peak ground velocity, spectral acceleration, spectrum intensity, acceleration spectrum intensity, Arias intensity, cumulative absolute velocity, and significant duration. After collection of metadata information, 681 three-component ground-motion recordings with magnitudes of Mw 4.9–6.9 were carefully processed and extracted from the China National Strong-Motion Observation Network System dataset (2007–2015). The applicability of both the Next Generation Attenuation (NGA)-West2 ground-motion model (GMM) and of other GMMs was verified for different IMs, regarding the China dataset. Then, empirical correlation coefficients between different IMs were computed, considering the uncertainty due to the different sample sizes of the observational data using the bootstrap sampling method and Fisher z transformation. Finally, the median values of the correlation coefficients were fitted as a continuous function of the vibration period in the range of 0.01–10.0 s and compared with the results of similar studies developed for shallow crustal regions worldwide. The developed region-specific correlation coefficient prediction model yielded tendencies approximately like those reported in other studies. However, obvious differences were found in long-period ranges of amplitude-based IMs, cumulative effect IMs, and significant duration. These results suggest the necessity of using region-specific correlation coefficients for generalized IMs in China. The presented results and parametric models could be easily implemented in a generalized IM ground-motion selection method or a vector-based probability seismic hazard analysis procedure for China.

Chile Strong Ground Motion Flatfile

2016 ◽  
Vol 32 (4) ◽  
pp. 2549-2566 ◽  
Author(s):  
Nicolas Bastías ◽  
Gonzalo A. Montalva
Keyword(s):  
Ground Motion ◽  
Plate Boundary ◽  
Peak Ground Velocity ◽  
South American ◽  
Ground Acceleration ◽  
Data Set ◽  
Intensity Measures ◽  
South American Plate ◽  
Rupture Plane ◽  
Illapel Earthquake

The Nazca-South American plate boundary produces large-magnitude events (Mw > 8) every 20 years on the coast of Chile. This work describes a public ground motion database that contains 3,572 records from 477 earthquakes and 181 seismic stations, which includes the recent 2015 Mw 8.3 Illapel earthquake. The data set is controlled by subduction interface and inslab events. The oldest event included is Valparaiso (1985), and the magnitude span is 4.6–8.8 Mw. The source-to-site distance metrics reported are the closest distance to the rupture plane ( R rup), epicentral ( R epi) and hypocentral ( R hyp) distances, with a range for R rup from 20 to 650 km. Site characterization is based on V S30, ranging from 110 to 1,951 m/s. Intensity measures included are peak ground acceleration, spectral acceleration values from 0.01 to 10 s, Arias intensity, and peak ground velocity. Each record was uniformly processed component by component. A flatfile with the related metadata and the spectral accelerations from processed ground motions is available at NEEShub ( http://doi.org/10.17603/DS2N30J ; Bastías and Montalva 2015 ).

scholarly journals Empirical Correlations between Peak Ground Velocity and Spectrum-Based Intensity Measures

2012 ◽  
Vol 28 (1) ◽  
pp. 17-35 ◽  
Author(s):  
Brendon A. Bradley
Keyword(s):  
Ground Motion ◽  
Peak Ground Velocity ◽  
Strongly Correlated ◽  
Correlation Equations ◽  
Ground Acceleration ◽  
Intensity Measures ◽  
Ground Motion Selection ◽  
Crustal Earthquakes ◽  
Short Period ◽  
Spectrum Intensity

Empirical correlation equations between peak ground velocity ( PGV) and several spectrum-based ground motion intensity measures are developed. The intensity measures examined in particular were: peak ground acceleration ( PGA), 5% damped pseudo-spectral acceleration ( SA), acceleration spectrum intensity ( ASI), and spectrum intensity ( SI). The computed correlations were obtained using ground motions from active shallow crustal earthquakes and four ground motion prediction equations. Results indicate that PGV is strongly correlated (i.e., a correlation coefficient of [Formula: see text]) with SI, moderately correlated with medium to long-period SA (i.e., [Formula: see text] for vibration periods 0.5-3.0 seconds), and also moderately correlated with short period SA, PGA and ASI ([Formula: see text]). A simple example is used to illustrate one possible application of the developed correlation equations for ground motion selection.

Vector and Scalar IMs in Structural Response Estimation, Part II: Building Demand Assessment

2016 ◽  
Vol 32 (3) ◽  
pp. 1525-1543 ◽  
Author(s):  
Mohsen Kohrangi ◽  
Paolo Bazzurro ◽  
Dimitrios Vamvatsikos
Keyword(s):  
Ground Motion ◽  
Hazard Analysis ◽  
Three Dimensional ◽  
Structural Response ◽  
Response Assessment ◽  
Companion Paper ◽  
Period Range ◽  
Intensity Measures ◽  
Advantages And Disadvantages ◽  
Story Drift

The advantages and disadvantages of using scalar and vector ground motion intensity measures (IMs) are discussed for the local, story-level seismic response assessment of three-dimensional (3-D) buildings. Candidate IMs are spectral accelerations, at a single period ( Sa) or averaged over a period range ( Sa avg). Consistent scalar and vector probabilistic seismic hazard analysis results were derived for each IM, as described in the companion paper in this issue ( Kohrangi et al. 2016 ). The response hazard curves were computed for three buildings with reinforced concrete infilled frames using the different IMs as predictors. Among the scalar IMs, Sa avg tends to be the best predictor of both floor accelerations and inter story drift ratios at practically any floor. However, there is an improvement in response estimation efficiency when employing vector IMs, specifically for 3-D buildings subjected to both horizontal components of ground motion. This improvement is shown to be most significant for a tall plan-asymmetric building.

Sign in / Sign up

Export Citation Format

Share Document