Shear crack width of RC column with cut-off rebar under cyclic loading

2009 ◽  
pp. 379-384
Keyword(s):  
Cyclic Loading ◽  
Crack Width ◽  
Shear Crack ◽  
Rc Column

Cyclic loading test for concrete-filled U-shaped steel beam–RC column connections

2012 ◽  
Vol 36 ◽  
pp. 325-336 ◽  
Author(s):  
Hong-Gun Park ◽  
Hyeon-Jong Hwang ◽  
Cheol-Ho Lee ◽  
Chang-Hee Park ◽  
Chang-Nam Lee
Keyword(s):  
Cyclic Loading ◽  
Steel Beam ◽  
Loading Test ◽  
Cyclic Loading Test ◽  
Rc Column

Lateral Cyclic Loading Experiment of Aramid FRP Reinforced Non-seismic Detailed RC Column

2019 ◽  
Vol 10 (6) ◽  
pp. 34-42
Author(s):  
Lee Taehun ◽  
Kim Sunhee ◽  
Rho Kwanggun ◽  
Choi Sungmo ◽  
Yang Ilseung
Keyword(s):  
Cyclic Loading ◽  
Rc Column

Experimental Research on Seismic Behavior of RC Column with Different Concrete under Horizontal Low Cyclic Loading

2011 ◽  
Vol 374-377 ◽  
pp. 2041-2045
Author(s):  
Jing Wu ◽  
Fa Zhou Wang ◽  
Yue Li ◽  
Wen Yang ◽  
Shu Guang Hu
Keyword(s):  
Cyclic Loading ◽  
Seismic Behavior ◽  
Lightweight Concrete ◽  
Concrete Strength ◽  
High Strength ◽  
Frame Structure ◽  
Dead Weight ◽  
Elastic Plastic ◽  
Rc Column ◽  
Low Cyclic Loading

On the premise of maintaining certain vertical bearing capacity, the frame structure dissipates seismic energy by elastic-plastic deformation in elastic-plastic stage of earthquake action. Using lightweight concrete in structure not only can reduce the its dead weight, decrease the earthquake power; also meet the concrete strength, stiffness and elastic modulus requirements of important structure, so as to improve its energy dissipation capacity. This paper researched the effect of concrete materials, including or such as C60 high strength Lightweight concrete (HSLC), high strength concrete (HSC) and high strength Light weight aggregate concrete (HSLAC), on the seismic behavior of RC column under horizontal low cyclic loading, respectively and the match relationship between concrete and steel reinforcement cage was analyzed.

scholarly journals Evaluation of Shear Crack Width in I-Shaped Prestressed Reinforced Concrete Beams

2008 ◽  
Vol 6 (3) ◽  
pp. 443-458 ◽  
Author(s):  
Sudhira De Silva ◽  
Hiroshi Mutsuyoshi ◽  
Eakarat Witchukreangkrai
Keyword(s):  
Reinforced Concrete ◽  
Crack Width ◽  
Concrete Beams ◽  
Shear Crack ◽  
Reinforced Concrete Beams

Shear-Crack Behaviors of Reinforced Full-Recycled Aggregate Concrete Beams

2013 ◽  
Vol 438-439 ◽  
pp. 794-799 ◽  
Author(s):  
Chang Yong Li ◽  
Guang Xin Li ◽  
Wen Jing Shao ◽  
Qi Guo ◽  
Rui Liu
Keyword(s):  
Crack Width ◽  
Concrete Beams ◽  
Shear Crack ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Fine Aggregate ◽  
Aggregate Concrete ◽  
Shear Span ◽  
Shear Cracking

On the basis of experimental results, this paper discusses the shear-crack behaviors such as shear-cracking force and shear-crack width of reinforced full-recycled aggregate concrete beams. The full-recycled aggregate concrete was developed for the sustainable development in civil engineering, in which the coarse aggregate was the recycled aggregate made of abandoned concrete, and the fine aggregate was the machine-made sand. Sixteen beams, six of them without stirrups, were tested with the shear-span ratio varying as 1.5, 2.0 and 3.0, and the ratio of stirrups varying from 0.19% to 0.35%. The results showed that the shear-cracking force of the beam was mainly affected by the shear-span ratio, the width of shear-cracks intersecting stirrups decreased with the increasing ratio of stirrups, but the maximum crack width almost exceeded the limit 0.3mm in the first class environmental condition specified in Chinese code GB50010-2010. Comparing the calculation results by substituting the test parameters of full-recycled aggregate concrete beams into the formula of ordinary reinforced concrete beams, the lower resistance of reinforced recycled concrete beam to shear-cracking, and the larger crack width intersecting stirrups should be noted in the structural design. Based on the test data, the formula for calculating the shear-cracking force and the shear-crack width of reinforced full-recycled aggregate concrete beams are suggested.

scholarly journals Impact of Cyclic Loading on Chloride Diffusivity and Mechanical Performance of RC Beams under Seawater Corrosion

2017 ◽  
Vol 2017 ◽  
pp. 1-15
Author(s):  
Sen Pang ◽  
Bo Diao ◽  
Yinghua Ye ◽  
Shuxin Chen ◽  
Xin Wang
Keyword(s):  
Cyclic Loading ◽  
Crack Width ◽  
Steel Surface ◽  
Ultimate Load ◽  
Mechanical Performance ◽  
Chloride Content ◽  
Chloride Diffusion ◽  
Chloride Diffusion Coefficient ◽  
Rc Beams ◽  
Chloride Diffusivity

An experimental study was conducted to investigate the impact of cyclic loading on the mechanical performance and chloride diffusivity of RC beams exposed to seawater wet-dry cycles. To induce initial damage to RC beam specimen, cyclic loading controlled by max load and cycles was applied. Then beam specimens underwent 240 wet-dry cycles of seawater. Results show that the chloride content increased as max load and cycle increased. The chloride content at steel surface increased approximatively linearly as average crack width increased. Moreover, the max load had more influence on chloride content at steel surface than cycle. The difference of average chloride diffusion coefficient between tension and compression concrete was little at uncracked position. Average chloride diffusion coefficient increased as crack width increased when crack width was less than 0.11 mm whereas the increasing tendency was weak when crack width exceeded 0.11 mm. The residual yield load and ultimate load of RC beams decreased as max load and cycle increased. Based on univariate analysis of variance, the max load had more adverse effect on yield load and ultimate load than cycle.

Sign in / Sign up

Export Citation Format

Share Document