scholarly journals Hydro mechanical behaviour of a heterogeneous swelling clay material

2020 ◽  
pp. 225-230
Author(s):  
C. Imbert ◽  
C. Gatabin ◽  
P. Maugis ◽  
D. Leboulch ◽  
E. Mouche
Géotechnique ◽  
2008 ◽  
Vol 58 (1) ◽  
pp. 45-54 ◽  
Author(s):  
A.-M. Tang ◽  
Y.-J. Cui ◽  
N. Barnel

Author(s):  
F. Al-Kufaishi

Two localities (Al-Marij and Laik) were selected to investigate the type of Quartz Grains from crustal material formed by evaporation of waters discharged by springs in Hit area, western Iraq, Previous studies on the crustal material (1,2) showed that the water discharged by these springs are associated with Abu-Jir fault system which run parallel to the Euphrates river,Factor analyses of the crustal and soil materials (50 samples analysed for 16 variables)(2) showed five factors; the first factor includes SiO2, Al2O3 and TiO2 with positive factor loading, and CaO, L.O.I. with negative loading and hence lead to the conclusion that the distribution of these variables is a reflection of transported clay material.This study concentrates on the use of SEM to investigate the contribution of Quartz grains found in the crustal material on two selected sites.


2019 ◽  
Vol 16 (3) ◽  
pp. 334-351
Author(s):  
A. S. Mavlyanov ◽  
E. K. Sardarbekova

Introduction. The objective of the research is to study the effect of the complex activation of the alumina raw material on the rheological properties of the ceramic mass. In addition, the authors investigate solutions for the application of optimal coagulation structures based on loams and ash together with plastic certificates.Materials and methods. The authors used the local forest like reserves of clay loams at the BashKarasu, ash fields of the Bishkek Central Heating Centre (BTEC) and plasticizer (sodium naphthenate obtained from alkaline chemical production wastes) as fibrous materials. Moreover, the authors defined technological properties of raw materials within standard laboratory methodology in accordance with current GOSTs.Results. The researchers tested plastic durability on variously prepared masses for the choice of optimal structures. The paper demonstrated the plastic durability of complexly activated compounds comparing with non-activated and mechanically activated compounds. The sensitivity coefficient increased the amount of clay loams by mechanically and complexly activated, which predetermined the possibility of intensifying the process of drying samples based on complexly activated masses.Discussion and conclusions. However, mechanical activation of clay material reduces the period of relaxation and increases the elasticity coefficient of ceramic masses by 1.8–3.4 times, meanwhile decreases elasticity, viscosity and the conventional power during molding, which generally worsens the molding properties of the masses. Сomplex activation of ash-clay material decreases the period of relaxation and provides an increase in elasticity, plasticity of ceramic masses by 46–47%, reduction in viscosity by 1.5–2 times, conventional power on molding by 37–122% in comparison with MA clay loams. Ceramic masses based on spacecraft alumina raw materials belong to the SMT with improved rheological properties; products based on them pass through the mouthpiece for 5–7 seconds.


2015 ◽  
Vol 14 (3) ◽  
pp. 601-605 ◽  
Author(s):  
Cristina M. Ursescu ◽  
Angelica Olaru ◽  
Teodor Malutan. ◽  
Maria Geba ◽  
Corina Malutan

2006 ◽  
Vol 10 (9) ◽  
pp. 1147-1175 ◽  
Author(s):  
Laurie Lacarrièrre ◽  
Alain Sellier ◽  
Xavier Bourbon

Sign in / Sign up

Export Citation Format

Share Document