This study evaluates and compares by dye penetration method and SEM photomicrographs the sealing obtained using two different classes of adhesive systems (etch-and-rinse and self-etch with selective etching) with SDR (Dentsply) bulk fill composite. 84 class V cavities were prepared on oral and vestibular face of 42 intact, freshly extracted wisdom teeth. The cavities were randomly divided in two groups and restored: Group 1 with prime &bond one select (Dentsply) and SDR (Dentsply) and Group 2 with prime&bond one Etch&Rinse (Dentsply) and SDR (Dentsply). Prime&bond one Select (Dentsply) is a single component adhesive and can be used in self etch mode, in selective enamel etch mode, or in etch-and-rinse mode. We chosen for this study the selective etch of the enamel mode. Prime&bond one Etch Rinse (Dentsply) is a universal etch-and-rinse one-bottle dental adhesive, designed to be used in two steps. The bulk fill composites are commonly used in modern dentistry due to their properties of low polymerization shrinkage and curing in layer of 4 mm depth, offering the practitioner a fast clinical procedure with good results. The results showed a good sealing at enamel and dentin margins with no statistically significant difference between adhesives, even though the mean of enamel infiltration was smaller for Group1. Furthermore the results show that there were differences between the two groups, for the infiltrations at the enamel, the values of microleakage being arithmetically higher for Group 1, but with no statistically difference between the two groups.SEM images showed for both groups a good adhesion surface with the tooth, but the hybrid layer of the total-etch adhesives is different from the hybrid layer formed by self etch adhesives, in terms of thickness, uniformity. In conclusion both adhesive systems have equivalent sealing qualities and can be successfully used with SDR.
Adhesive Resins with High Shelf-Life Stability Based on Tetra Unsaturated Monomers with Tertiary Amines Moieties