Biodegradation of Chemical Pollutants of Tannery Wastewater

2016 ◽  
pp. 385-412 ◽  
Author(s):  
Niaz Ahmed Memon ◽  
Nisar Ahmed ◽  
Tooba haq ◽  
Sarwat Ismail ◽  
Uzma Rashid ◽  
...  

2018 ◽  
Vol 17 (9) ◽  
pp. 2157-2164 ◽  
Author(s):  
Palanivel Saravanan ◽  
Sundaramoorthy Sundarapandiyan ◽  
Guntamadugu Bhaskar Raju ◽  
Bangaru Chandrasekaran

2015 ◽  
Vol 14 (9) ◽  
pp. 2139-2148 ◽  
Author(s):  
Sourja Ghosh ◽  
Priyankari Bhattacharya ◽  
Swachchha Majumdar ◽  
Somendra Nath Roy ◽  
Sibdas Bandyopadhyay

2010 ◽  
Vol 16 (2) ◽  
pp. 285-288 ◽  
Author(s):  
Weibin TANG ◽  
Houzhen ZHOU ◽  
Zhouliang TAN ◽  
Xudong LI

2018 ◽  
Vol 69 (8) ◽  
pp. 2278-2282
Author(s):  
Stelian Ioan Morariu ◽  
Letitia Doina Duceac ◽  
Alina Costina Luca ◽  
Florina Popescu ◽  
Liliana Pavel ◽  
...  

Maintaining the soil in optimal parameters is vital for mankind, given its essential role in providing the alimentary base, as well as its extremely slow formation and regeneration (hundreds or thousands of years). The direct and indirect pollution of the soil and especially its chemical pollution represent a corollary of other types of pollution, given that it is produced by solid, liquid and gaseous residues. It may be involved in a wide range of diseases (respiratory, cardiovascular, digestive, renal, haematological, osteoarticular, neurological) of allergic, infectious, degenerative or neoplastic nature, from infancy to the old age. Although there are natural causes of soil pollution (e.g. volcanic eruptions), most pollutants come from human activities, which are the most incriminated in its pollution, degradation and erosion at an accelerated pace. The growing concern of all nations for the adoption of measures to limit the chemical pollution of the soil is partially found so far in viable and effective solutions intended to combat soil contamination and degradation and ensure its restoration. Chemical industrialization leads to technical and scientific progress, but at the same time it can develop related pathologies, which means that the role of the occupational health physician is essential in ensuring prophylaxis and the early detection of occupational diseases. Besides that, the role of the pediatrician is equally precious for the detection of specific diseases caused by chemical pollutants to children, because they will develop into adults with pathological stigma.The chemical pollution of the soil is a major challenge for ecologists, given that it is an important risk factor for many types of afflictions. It requires maximum attention from civil society, health care professionals and government institutions. The specialist in occupational medicine, as well as the pediatrician bear an essential responsibility in both, prevention and treatment.


2017 ◽  
Vol 68 (9) ◽  
pp. 2189-2195
Author(s):  
Valeriu V. Jinescu ◽  
Simona Eugenia Manea ◽  
George Jinescu ◽  
Vali Ifigenia Nicolof

Following the activities developed in a nuclear facility result gaseous and liquid radioactive effluents and radioactive solid waste. All these waste contain radioactive isotopes which are potentially pollutants for the environment. In the same time chemicals are, also, pollutants. According to the legislation, discharging of chemicals and radioactive liquid and gaseous effluents into the environment, should meet the requirements of the unrestricted discharge. However, what happens when several pollutants superpose: only chemical pollutants, or only radioactive pollutants, or chemical and radioactive pollutants? Such problems have been solved in this paper on the basis of the principle of critical energy.


2021 ◽  
Vol 14 ◽  
pp. 117862212110281
Author(s):  
Ahmed S. Mahmoud ◽  
Nouran Y. Mohamed ◽  
Mohamed K. Mostafa ◽  
Mohamed S. Mahmoud

Tannery industrial effluent is one of the most difficult wastewater types since it contains a huge concentration of organic, oil, and chrome (Cr). This study successfully prepared and applied bimetallic Fe/Cu nanoparticles (Fe/Cu NPs) for chrome removal. In the beginning, the Fe/Cu NPs was equilibrated by pure aqueous chrome solution at different operating conditions (lab scale), then the nanomaterial was applied in semi full scale. The operating conditions indicated that Fe/Cu NPs was able to adsorb 68% and 33% of Cr for initial concentrations of 1 and 9 mg/L, respectively. The removal occurred at pH 3 using 0.6 g/L Fe/Cu dose, stirring rate 200 r/min, contact time 20 min, and constant temperature 20 ± 2ºC. Adsorption isotherm proved that the Khan model is the most appropriate model for Cr removal using Fe/Cu NPs with the minimum error sum of 0.199. According to khan, the maximum uptakes was 20.5 mg/g Cr. Kinetic results proved that Pseudo Second Order mechanism with the least possible error of 0.098 indicated that the adsorption mechanism is chemisorption. Response surface methodology (RSM) equation was developed with a significant p-value = 0 to label the relations between Cr removal and different experimental parameters. Artificial neural networks (ANNs) were performed with a structure of 5-4-1 and the achieved results indicated that the effect of the dose is the most dominated variable for Cr removal. Application of Fe/Cu NPs in real tannery wastewater showed its ability to degrade and disinfect organic and biological contaminants in addition to chrome adsorption. The reduction in chemical oxygen demand (COD), biological oxygen demand (BOD), total suspended solids (TSS), total phosphorus (TP), total nitrogen (TN), Cr, hydrogen sulfide (H2S), and oil reached 61.5%, 49.5%, 44.8%, 100%, 38.9%, 96.3%, 88.7%, and 29.4%, respectively.


Sign in / Sign up

Export Citation Format

Share Document