FPSO response and water depth: A study using model tests

2016 ◽  
pp. 51-54
Author(s):  
V Kurian ◽  
N Rini ◽  
M Liew ◽  
A Whyte
Keyword(s):  
Water Depth ◽  
Model Tests

Resistance Tests of an Articulated Pusher Barge System in Deep and Shallow Water

2021 ◽  
Author(s):  
Li Zhang ◽  
Lei Xing ◽  
Mingyu Dong ◽  
Weimin Chen
Keyword(s):  
Shallow Water ◽  
Water Depth ◽  
Deep Water ◽  
Water Resistance ◽  
Model Tests ◽  
System 2 ◽  
Changing Trend ◽  
The Difference ◽  
Transport Vessel ◽  
Resistance Performance

Abstract Articulated pusher barge vessel is a short-distance transport vessel with good economic performance and practicability, which is widely used in the Yangtze River of China. In this present work, the resistance performance of articulated pusher barge vessel in deep water and shallow water was studied by model tests in the towing tank and basin of Shanghai Ship and Shipping Research Institute. During the experimental investigation, the articulated pusher barge vessel was divided into three parts: the pusher, the barge and the articulated pusher barge system. Firstly, the deep water resistance performance of the articulated pusher barge system, barge and the pusher at design draught T was studied, then the water depth h was adjusted, and the shallow water resistance at h/T = 2.0, 1.5 and 1.2 was tested and studied respectively, and the difference between deep water resistance and shallow water resistance at design draught were compared. The results of model tests and analysis show that: 1) in the study of deep water resistance, the total resistance of the barge was larger than that of the articulated pusher barge system. 2) for the barge, the shallow water resistance increases about 0.4–0.7 times at h/T = 2.0, 0.5–1.1 times at h/T = 1.5, and 0.7–2.3 times at h/T = 1.2. 3) for the pusher, the shallow water resistance increases about 1.0–0.4 times at h/T = 2.7, 1.2–0.9 times at h/T = 2.0, and 1.7–2.4 times at h/T = 1.6. 4) for the articulated pusher barge system, the shallow water resistance increases about 0.2–0.3 times at h/T = 2.0, 0.5–1.3 times at h/T = 1.5, and 1.0–3.5 times at h/T = 1.2. Furthermore, the water depth Froude number Frh in shallow water was compared with the changing trend of resistance in shallow water.

Development of Deep Water Multicolumn Buoy

2014 ◽  
Author(s):  
Rodrigo A. Barreira ◽  
Vinicius L. Vileti ◽  
Joel S. Sales ◽  
Sergio H. Sphaier ◽  
Paulo de Tarso T. Esperança
Keyword(s):  
Conceptual Design ◽  
Water Depth ◽  
Deep Water ◽  
Model Tests ◽  
Optimization Process ◽  
Life Duration

A new conceptual design of a deepwater MONOBUOY, named DeepWater MultiColumn Buoy (DWMCB), patent PCT/BR2011/000133, was developed by PETROBRAS/CENPES. The DWMCB was designed to be part of an offloading system for a Spread Moored Floating Production Offloading Unit (FPSO). The offloading system principle consists of Oil being exported from the FPSO to a Shutle tanker passing through Offloading Oil Lines (OOLs) that are supported by the DWMCB. The system is designed to operate at a water depth of 2,200 meters, with expected in site life duration of 25 years. The geometry of DWMCB was defined after an optimization process in order to minimize its motions. This paper describes the development of this concept and discusses the results from some design verifications done with the help of a model tests campaign. An equivalent traditional shaped monobuoy was also tested for comparison purposes.

FourStar™ Dry-Tree Semisubmersible Development

2010 ◽  
Author(s):  
Neil Williams ◽  
Steve Leverette ◽  
Sean Bian ◽  
Sean Large ◽  
Peimin Cao
Keyword(s):  
Water Depth ◽  
Model Tests ◽  
Wave Basin

This paper discusses the development of a dry-tree semisubmersible (DTS) platform concept appropriate for deployment in non-hurricane/non-cyclonic environments worldwide, and the verification of the concept through wave basin model tests. An example configuration is presented for an application in 2,100 m water depth offshore Brazil.

FPSO response and water depth: A study using model tests

2016 ◽  
pp. 51-54
Author(s):  
V.J. Kurian ◽  
N. Rini ◽  
M.S. Liew ◽  
A. Whyte
Keyword(s):  
Water Depth ◽  
Model Tests

Application of Roughening with the Grass Cushions in the Hydraulic Model of Comprehensive Harness of Qian'an Reach of Luan River

2013 ◽  
Vol 405-408 ◽  
pp. 2096-2099
Author(s):  
Hai Jing Zhao ◽  
Ya Dong Jin ◽  
Jun Liu
Keyword(s):  
Water Depth ◽  
Hydraulic Model ◽  
Model Tests ◽  
Test Area ◽  
Comprehensive Model ◽  
Hydraulic Models

Restricted by such factors as the size of test area, amount of work and water depth of model, hydraulic models are often made into distorted patterns, whereas the distorted models demand for roughening usually. The hydraulic model of comprehensive harness of Qian'an Reach of Luan River requires big roughness that general roughening technologies cant meet, so the plastic grass cushions were introduced. The preliminary experiment in flume, the preliminary experiment of the comprehensive model and the verification experiment of the comprehensive model proved the feasibility of the technology of roughening with the grass cushions in hydraulic model tests.

Slow-Drift Pitch Motions and Air-Gap Observed From Model Testing With Moored Semisubmersibles

2007 ◽  
Author(s):  
Carl Trygve Stansberg
Keyword(s):  
Numerical Analysis ◽  
Water Depth ◽  
Low Frequency ◽  
Model Testing ◽  
Model Tests ◽  
Air Gap ◽  
Wave Drift ◽  
Slow Drift ◽  
Gap Data ◽  
Good Agreement

Low-frequency pitch motions of a moored semisubmersible in irregular sea states are analyzed. Physical mechanisms and significance to air-gap problems are addressed. Excitation from wave drift and from moorings/risers is primarily considered, Effects from current and wind are also addressed. Related challenges in deepwater model testing of semis with truncated moorings are discussed. Motion and air-gap data from two previously performed model tests are analysed. Catenary moorings in 335m water depth and in 1100m water depth, respectively, are considered. Model scales are 1:55 and 1:150, respectively. Observed slow-drift pitch components are of the same magnitude level as the wave-frequency components. Comparisons to coupled numerical analysis models are made. Wave drift moment coefficients calibrated empirically according to experiments were used, since the original coefficients gave too low results. The final comparisons show good agreement for the 1:55 case. For the 1:150 case, fairly good agreement is found, but some deviations are observed and believed to be due to poorer wave repeatablity. Tests with truncated moorings at half of the two actual depths were also included, for a check of methods for deepwater model tests performed at reduced depths and combine with numerical analysis (hybrid verification). The importance of proper experimental reproduction at reduced depths, of full-depth pitch and air-gap, is addressed. The results show that with the actual truncation designs, reasonable agreements are obtained, but use of the scale 1:150 seems to give too large uncertainties due to the poorer wave repeatability.

scholarly journals Validation of Numerical Wave Tank Simulations Using REEF3D With JONSWAP Spectra in Intermediate Water Depth

2020 ◽  
Author(s):  
Csaba Pakozdi ◽  
Sebastien Fouques ◽  
Maxime Thys ◽  
Arun Kamath ◽  
Weizhi Wang ◽  
...  
Keyword(s):  
Test Data ◽  
Model Test ◽  
Water Depth ◽  
Model Tests ◽  
Irregular Waves ◽  
Wave Crest ◽  
Intermediate Water ◽  
Numerical Wave Tank ◽  
Wave Tank ◽  
Numerical Wave

Abstract As offshore wind turbines increase in size and output, the support structures are also growing. More sophisticated assessment of the hydrodynamic loads is needed, particularly for the ultimate limit state design. For higher-order phenomena related to rare steep wave events such as ringing, a better understanding of the stochastic loads is needed. As an innovative step forward to reduce the cost of extensive model tests with irregular waves, a larger number of investigations can be carried out using high-performance high-fidelity numerical simulations after an initial stochastic validation with model test data. In this paper, the open-source hydrodynamic model REEF3D::FNPF (Fully Nonlinear Potential Flow) is used to carry out three-hour long simulations with the JONSWAP spectrum in intermediate water depth conditions. Statistical properties of the free surface elevation in the numerical wave tank are validated using the available data from model tests carried out at SINTEF Ocean/NTNU. The spectral shape, significant wave height, peak period, skewness, kurtosis, and wave crest height statistics are compared. The results are analyzed and it is found that the numerical model provides reasonably good agreement with the model test data.

Experimental Determination of Resonant Response in the Narrow Gap Between Two Side-by-Side Fixed Bodies in Deep Water

2016 ◽  
Author(s):  
Wenhua Zhao ◽  
Hugh Wolgamot ◽  
Scott Draper ◽  
Paul H. Taylor ◽  
Rodney Eatock Taylor ◽  
...  
Keyword(s):  
White Noise ◽  
Numerical Simulations ◽  
Water Depth ◽  
Deep Water ◽  
Model Tests ◽  
Full Scale ◽  
Resonance Phenomenon ◽  
Resonant Response ◽  
Gap Resonance ◽  
Wave Basin

Floating liquefied natural gas (FLNG) facilities are a new type of offshore structure, which have been developed as a game changer in offshore hydrocarbon development for unlocking stranded gas reserves. One of the key challenges associated is offloading from FLNG facilities to LNG carriers. Offloading may proceed with vessels in a side-by-side configuration, which allows offtake by un-modified vessels and minimizes requirements for new hardware or procedures (e.g. compared to a tandem operation). Significant challenges remain, however, and reliable offloading is critical for successful FLNG implementation. In this scenario, the two vessels are separated by a narrow 4 m wide gap. The resonant response of the sea surface in the gap has been predicted by numerical simulations [1] to be a few times that of the incident waves at particular frequencies. As a consequence, the gap resonant response may play a role in determining the operational window for side-by-side offloading operations, and thus has attracted a lot of attention recently. There have been studies on this topic both numerically and experimentally. However, many of these studies are in 2 dimensions (2D), for relatively large gaps and relatively shallow water depth, which may pose difficulties when extending the results to a real project. It is unclear what will happen for a gap resonance if the gap width gets narrower (say 4 m in full scale) and the water depth gets deeper (say 600 m in full scale). In this study, we conducted a series of model tests at a scale of 1:60 in a large wave basin, and focused on deep water and, crucially, narrow gaps, which are closer to a real project geometry. To facilitate future numerical simulations, we used two identical fixed bodies in the model tests and the vessels were simple barge-like shapes. Using white noise waves as the excitation, which covers a broad brand, the response of the fluid in the gap has been measured at several points. In these experiments, different modes of the gap resonance have been observed. Response amplitude operators (RAOs) of the gap resonance have been obtained through spectral analyses, which provide valuable information for the design of side-by-side operations and will benefit future numerical simulations. Test runs in white noise waves with different significant wave heights were also performed, to study the nonlinearities of the gap resonance phenomenon.

Experimental and Numerical Study on Large Truncation of Deepwater Mooring Line

2009 ◽  
Author(s):  
Yihua Su ◽  
Jianmin Yang ◽  
Longfei Xiao ◽  
Gang Chen
Keyword(s):  
Dynamic Response ◽  
Water Depth ◽  
Numerical Study ◽  
Unit Length ◽  
Low Frequency ◽  
Model Tests ◽  
Mooring Line ◽  
Mooring System ◽  
Mooring Lines ◽  
Wave Basin

Modeling the deepwater mooring system in present available basin using standard Froude scaling at an acceptable scale presents new challenges. A prospective method is to truncate the full-depth mooring lines and find an equivalent truncated mooring system that can reproduce both static and dynamic response of the full-depth mooring system, but large truncation arise if the water depth where the deepwater platform located is very deep or the available water depth of the basin is shallow. A Cell-Truss Spar operated in 1500m water depth is calibrated in a wave basin with 4m water depth. Large truncation arises even though a small model scale 1:100 is chosen. A series of truncated mooring lines are designed and investigated through numerical simulations, single line model tests and coupled wave basin model tests. It is found that dynamic response of the truncated mooring line can be enlarged by using larger diameter and mass per unit length in air. Although the truncated mooring line with clump presents a “taut” shape, its dynamic characteristics is dominated by the geometry stiffness and it underestimates dynamic response of the full-depth mooring line, even induces high-frequency dynamic response. There are still two obstacles in realizing dynamic similarity for the largely truncated mooring system: lower mean value of the top tension of upstream mooring lines, and smaller low-frequency mooring-induced damping.

scholarly journals STABILITY OF INTERLOCKING ARMOUR UNITS ON A BREAKWATER CREST

2012 ◽  
Vol 1 (33) ◽  
pp. 11 ◽  
Author(s):  
Ilse Van den Bosch ◽  
Erik Ten Oever ◽  
Pieter Bakker ◽  
Markus Muttray
Keyword(s):  
Wave Height ◽  
Water Depth ◽  
Packing Density ◽  
Single Layer ◽  
Hydraulic Model ◽  
Model Tests ◽  
Wave Steepness ◽  
Design Wave Height ◽  
The Stability ◽  
Hydraulic Stability

The hydraulic stability of single layer, interlocking armour units on low crested and submerged breakwaters was investigated in 2D hydraulic model tests. Displacements of armour units and rocking were monitored and have been applied as indicators for the armour layer stability on the crest, front and rear slope. The effect of freeboard, packing density and wave steepness on the armour layer stability have been investigated. The stability of interlocking concrete armour units on low crested and submerged structures is qualitatively different from rock armour. About 40% to 50% larger armour units are required on the seaward slope and crest of low crested structures (as compared to conventional high crested breakwaters). About 35% larger armour units are required on the rear slope. Larger armour units are not required on submerged breakwaters if the water depth on the crest exceeds 50% of design wave height.

Sign in / Sign up

Export Citation Format

Share Document