Effect of Angiotensin II on in Vivo and in Vitro Release of Anterior Pituitary Hormones in the Female Rat*

Endocrinology ◽  
1981 ◽  
Vol 109 (3) ◽  
pp. 893-899 ◽  
Author(s):  
M. K. STEELE ◽  
A. NEGRO-VILAR ◽  
S. M. MCCANN
Keyword(s):  
Angiotensin Ii ◽  
Anterior Pituitary ◽  
In Vitro Release ◽  
Pituitary Hormones ◽  
Female Rat ◽  
Anterior Pituitary Hormones ◽  
Vitro Release

Vasopressin as a neuroendocrine regulator of anterior pituitary hormone secretion

1993 ◽  
Vol 129 (6) ◽  
pp. 489-496 ◽  
Author(s):  
Andreas Kjær
Keyword(s):  
Arginine Vasopressin ◽  
Mode Of Action ◽  
Anterior Pituitary ◽  
Hormone Secretion ◽  
Pituitary Hormones ◽  
Pituitary Hormone ◽  
Anterior Pituitary Hormones ◽  
Anterior Pituitary Hormone

Secretion of the anterior pituitary hormones adrenocorticotropin (ACTH), β-endorphin and prolactin (PRL) is complex and involves a variety of factors. This review focuses on the involvement of arginine-vasopressin (AVP) in neuroendocrine regulation of these anterior pituitary hormones with special reference to receptor involvement, mode of action and origin of AVP. Arginine-vasopressin may act via at least two types of receptors: V1− and V2−receptors, where the pituitary V1−receptor is designated V1b. The mode of action of AVP may be mediating, i.e. anterior pituitary hormone secretion is transmitted via release of AVP, or the mode of action may be permissive, i.e. the presence of AVP at a low and constant level is required for anterior pituitary hormones to be stimulated. Under in vivo conditions, the AVP-induced release of ACTH and β-endorphin is mainly mediated via activation of hypothalamic V1− receptors, which subsequently leads to the release of corticotropin-releasing hormone. Under in vitro conditions, the AVP-stimulated release of ACTH and β-endorphin is mediated via pituitary V1b− receptors. The mode of action of AVP in the ACTH and β-endorphin response to stress and to histamine, which is involved in stress-induced secretion of anterior pituitary hormones, is mediating (utilizing V1− receptors) as well as permissive (utilizing mainly V1− but also V2−receptors). The AVP-induced release of PRL under in vivo conditions is conveyed mainly via activation of V1−receptors but V2−receptors and probably additional receptor(s) may also play a role. In stress- and histamine induced PRL secretion the role of AVP is both mediating (utilizing V1 −receptors) and permissive (utilizing both V1− and V2− receptors). Arginine-vasopressin may be a candidate for the PRL-releasing factor recently identified in the posterior pituitary gland. Arginine-vasopressin of both magno- and parvocellular origin may be involved in the regulation of anterior pituitary hormone secretion and may reach the corticotrophs and the lactotrophs via three main routes: the peripheral circulation, the long pituitary portal vessels or the short pituitary portal vessels.

Reliability of a Single β-Thromboglobulin Measurement in a Diabetic Population : Importance of PGE1 in Anticoagulant Mixture

1987 ◽  
Vol 57 (02) ◽  
pp. 201-204 ◽  
Author(s):  
P Y Scarabin ◽  
L Strain ◽  
C A Ludlam ◽  
J Jones ◽  
E M Kohner
Keyword(s):  
In Vitro Release ◽  
Mean Value ◽  
Reliable Estimate ◽  
Diabetic Patients ◽  
Single Measurement ◽  
Diabetic Population ◽  
The Difference ◽  
Vitro Release

SummaryDuring the collection of samples for plasma β-thromboglobulin (β-TG) determination, it is well established that artificially high values can be observed due to in-vitro release. To estimate the reliability of a single β-TG measurement, blood samples were collected simultaneously from both arms on two separate occasions in 56 diabetic patients selected for a clinical trial. From each arm, blood was taken into two tubes containing an anticoagulant mixture with (tube A) and without (tube B) PGE!. The overall mean value of B-TG in tube B was 1.14 times higher than in tube A (p <0.01). The markedly large between-arms variation accounted for the most part of within-subject variation in both tubes and was significantly greater in tube B than in tube A. Based on the difference between B-TG values from both arms, the number of subjects with artifically high B-TG values was significantly higher in tube B than in tube A on each occasion (overall rate: 28% and 14% respectively). Estimate of between-occasions variation showed that B-TG levels were relatively stable for each subject between two occasions in each tube. It is concluded that the use of PGEi decreases falsely high B-TG levels, but a single measurement of B-TG does not provide a reliable estimate of the true B-TG value in vivo.

Development, in vitro and in vivo Evaluations of Solid-Lipid Microparticles based on Solidified Micellar Carrier System for Oral Delivery of Cefepime

2017 ◽  
Vol 10 (1) ◽  
pp. 3582-3593
Author(s):  
Chukwuebuka Umeyor ◽  
Uchechukwu Nnadozie ◽  
Anthony Attama
Keyword(s):  
Oral Delivery ◽  
In Vitro Release ◽  
Carrier System ◽  
Solid Lipid ◽  
Solid Lipid Microparticles ◽  
Release Study ◽  
Lipid Microparticles ◽  
Vitro Release

This study seeks to formulate and evaluate a solid lipid nanoparticle-based, solidified micellar carrier system for oral delivery of cefepime. Cefepime has enjoyed a lot of therapeutic usage in the treatment of susceptible bacterial infections; however, its use is limited due to its administration as an injection only with poor patient compliance. Since oral drug administration encourage high patient compliance with resultant effect in improved therapy, cefepime was formulated as solid lipid microparticles for oral delivery using the concept of solidified micellar carrier system. The carrier system was evaluated based on particle yield, particle size and morphology, encapsulation efficiency (EE %), and thermal analysis using differential scanning calorimeter (DSC). Preliminary microbiological studies were done using gram positive and negative bacteria. In vitro release study was performed using biorelevant media, while in vivo release study was performed in white albino rats. The yield of solid lipid microparticles (SLM) ranged from 84.2 – 98.0 %. The SLM were spherical with size ranges of 3.8 ± 1.2 to 42.0 ± 1.4 µm. The EE % calculated ranged from 83.6 – 94.8 %. Thermal analysis showed that SLM was less crystalline with high potential for drug entrapment. Microbial studies showed that cefepime retained its broad spectrum anti-bacterial activity. In vitro release showed sustained release of cefepime from SLM, and in vivo release study showed high concentration of cefepime released in the plasma of study rats. The study showed that smart engineering of solidified micellar carrier system could be used to improve oral delivery of cefepime.

Formulation and Evaluation of Itopride Hydrochloride Floating Beads for Gastroretentive Delivery

2013 ◽  
Vol 6 (4) ◽  
pp. 2269-2280
Author(s):  
Nagratna Dhople ◽  
P N Dandag ◽  
A P Gadad ◽  
C K Pandey ◽  
Masthiholimath V S
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sustained Release Formulation ◽  
Prokinetic Drug ◽  
Drug Entrapment Efficiency ◽  
Itopride Hydrochloride ◽  
Vitro Release

A gastroretentive sustained release system of itopride hydrochloride was formulated to increase the gastric residence time and modulate its release behavior. Itopride hydrochloride is a prokinetic drug used in the treatment of gastroeosophageal reflux disease, Non-ulcer dyspepsia and as an antiemetic. Hence, itopride hydrochloride beads were prepared by emulsion gelation method by employing low methoxy pectin and sodium alginate as sustained release polymers in three different ratios alone and in combination and sunflower oil was used to enable floating property to the beads. The effect of variation in polymer and their concentration was investigated. The beads were evaluated for production yield, particle size, swelling index, density measurement, buoyancy, drug content, drug entrapment efficiency, in vitro release characteristics and release kinetic study. Based on drug entrapment efficiency, buoyancy, swelling and in vitro release, F9 was selected as the optimized formulation. F9 was further subjected to surface morphology by SEM, in vitro release comparison with marketed formulation, in vivo floating study in rabbits and stability study for 90 days. In vitro release follows zero order and fitted in Korsmeyer peppas model (Non-Fickian release). Therefore, the rate of drug release is due to the combined effect of drug diffusion and polymer swelling. The in vivo X-ray studies revealed that the beads were floating in the rabbit stomach up to 10 hours. Thus, it was concluded that the sustained release formulation containing itopride hydrochloride was found to improve patient compliance, minimize the side effects and decrease the frequency of administration.

Medicament Release from Ointment Bases: III. Ibuprofen: In Vitro Release and In-Vivo Absorption in Rabbits

1986 ◽  
Vol 12 (14) ◽  
pp. 2521-2540 ◽  
Author(s):  
A. Muktadir ◽  
A. Babar ◽  
A. J. Cutie ◽  
F. M. Plakogiannis
Keyword(s):  
In Vitro Release ◽  
In Vivo Absorption ◽  
Vitro Release

Preparation, Characterization and In Vitro Release Kinetics of Vancomycin Carried β-TCP/Chitosan Composite Microspheres Used as Bone Tissue Engineering Scaffolds

2012 ◽  
Vol 512-515 ◽  
pp. 1821-1825
Author(s):  
Lin Zhang ◽  
Xue Min Cui ◽  
Qing Feng Zan ◽  
Li Min Dong ◽  
Chen Wang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Cross Linking ◽  
Tissue Engineering Scaffolds ◽  
Composite Microspheres ◽  
Chitosan Composite ◽  
Vitro Release

A novel microsphere scaffolds composed of chitosan and β-TCP containing vancomycin was designed and prepared. The β-TCP/chitosan composite microspheres were prepared by solid-in-water-in-oil (s/w/o) emulsion cross-linking method with or without pre-cross-linking process. The mode of vancomycin maintaining in the β-TCP/chitosan composite microspheres was detected by Fourier transform infrared spectroscopy (FTIR). The in vitro release curve of vancomycin in simulated body fluid (SBF) was estimated. The results revealed that the pre-cross-linking prepared microspheres possessed higher loading efficiency (LE) and encapsulation efficiency (EE) especially decreasing the previous burst mass of vancomycin in incipient release. These composite microspheres got excellent sphere and well surface roughness in morphology. Vancomycin was encapsulated in composite microspheres through absorption and cross-linking. While in-vitro release curves illustrated that vancomycin release depond on diffusing firstly and then on the degradation ratio later. The microspheres loading with vancomycin would be to restore bone defect, meanwhile to inhibit bacterium proliferation. These bioactive, degradable composite microspheres have potential applications in 3D tissue engineering of bone and other tissues in vitro and in vivo.

TISSUE CULTURE STUDIES ON HUMAN PITUITARY TUMOURS: RADIOIMMUNOASSAYABLE ANTERIOR PITUITARY HORMONES IN THE CULTURE MEDIUM

1978 ◽  
Vol 88 (2) ◽  
pp. 239-249 ◽  
Author(s):  
Loren G. Lipson ◽  
Inese Z. Beitins ◽  
Paul D. Kornblith ◽  
Janet W. Mc Arthur ◽  
Henry G. Friesen ◽  
...  
Keyword(s):  
Tissue Culture ◽  
Cushing’S Disease ◽  
Anterior Pituitary ◽  
Pituitary Hormones ◽  
Cushing's Disease ◽  
Hormone Release ◽  
Pituitary Tumours ◽  
Human Pituitary ◽  
Anterior Pituitary Hormones

ABSTRACT A tissue culture study was undertaken to determine if human non-functioning pituitary tumours secrete polypeptide anterior pituitary hormones in vitro and to study the spectrum of hormone release by functioning pituitary neoplasms. Fragments from 48 human pituitary tumours (from patients - 2 with Cushing's disease, 1 with Nelson's syndrome, 5 with amenorrhoea-galactorrhoea, 10 with acromegaly and 30 with non-functioning pituitary tumours) and three normal human anterior pituitary glands (controls) were placed in tissue culture immediately after surgery. The in vitro release of human growth hormone (HGH), prolactin (Prl), thyrotrophin (TSH), adrenocorticotrophin (ACTH), luteinizing hormone (LH) and follicle stimulating hormone (FSH) were measured by radioimmunoassays at the end of one week in culture. Clinical and pathological data were compared to hormone release patterns. In the culture media from control pituitaries the concentrations of the six hormones tested were 100 to 10 000 times greater than in peripheral blood. The medium surrounding the fragments from functioning pituitary tumours contained the following: a) Acromegaly - high levels of HGH and variable concentrations of the other hormones. b) Cushing's disease - ACTH and Prl predominantly. c) Amenorrhcea-galactorrhoea syndrome - prolactin in 4 out of 5 patients, all six polypeptides in one patient. In the media from the 30 patients diagnosed as having non-functioning pituitary tumours, 60 % of the samples contained at least one hormone at a concentration similar to that of the controls and 100 % of the samples contained detectable quantities of at least one hormone.

Sign in / Sign up

Export Citation Format

Share Document