Dissection of sexual organ ontogenesis: a genetic analysis of ovule development in Arabidopsis thaliana

Development ◽  
1997 ◽  
Vol 124 (7) ◽  
pp. 1367-1376 ◽  
Author(s):  
K. Schneitz ◽  
M. Hulskamp ◽  
S.D. Kopczak ◽  
R.E. Pruitt

Understanding organogenesis remains a major challenge in biology. Specification, initiation, pattern formation and cellular morphogenesis, have to be integrated to generate the final three-dimensional architecture of a multicellular organ. To tackle this problem we have chosen the ovules of the flowering plant Arabidopsis thaliana as a model system. In a first step towards a functional analysis of ovule development, we performed a large-scale genetic screen and isolated a number of sterile mutants with aberrant ovule development, We provide indirect genetic evidence for the existence of proximal-distal pattern formation in the Arabidopsis ovule primordium. The analysis of the mutants has identified genes that act at an intermediate regulatory level and control initiation of morphogenesis in response to proximal-distal patterning. A second group of genes functions at a subordinate control level and regulates general cellular processes of morphogenesis. A large group of male and female sterile mutants shows defects restricted to early or late gametogenesis. In addition, we propose that the mature ovule obtains its overall curved shape by at least three different processes that act in only one domain of the ovule.

Development ◽  
1991 ◽  
Vol 113 (Supplement_1) ◽  
pp. 27-38 ◽  
Author(s):  
Gerd Jürgens ◽  
Ulrike Mayer ◽  
Torres Ruiz Ramon A. ◽  
Thomas Berleth ◽  
Simon Miséra

Virtually nothing is known about the mechanisms that generate the basic body pattern in plant embryogenesis. As a first step towards the analysis of pattern formation, we have isolated and begun to characterise putative pattern mutants in the flowering plant, Arabidopsis thaliana. A large-scale screen for morphologically abnormal seedling mutants yielded about 250 lines for further study, and genetic evidence suggests saturation of the genome for this kind of mutation. The phenotypes of putative pattern mutants fall into distinct categories, classes and groups, which may reflect specific aspects of embryonic pattern formation. Mutant seedling phenotypes result from abnormal development in the early embryo. The implications of our findings are discussed with regard to the prospects for a mechanistic understanding of pattern formation in the plant embryo.


2019 ◽  
Vol 118 ◽  
pp. 04033
Author(s):  
Yuming Tang ◽  
Hong Liang ◽  
Yi Zhao ◽  
Bingfeng Seng

Cyanobacteria are large single-cell prokaryotes that can undergo oxygen-producing photosynthesis. However, if the cyanobacteria are contaminated by nitrogen, phosphorus and other elements, cyanobacteria will cause the phenomenon of “water bloom” in the lake, which will seriously endanger the safety of humans, animals, fish and shrimps. To help lake management units to prevent and control the outbreak of cyanobacteria, this paper designed and developed a comprehensive management system for the prevention and control of cyanobacteria blooms and salvage treatment. The system consists of four subsystems: the operational reporting subsystem, the monitoring data management system, the algae environmental protection disposal process management system, and the real-time cyanobacteria monitoring system. The three-dimensional interaction between the WEB end and the mobile patrol handheld terminal makes the system more efficient and convenient. The neighborhood image is denoised by the neighborhood averaging method, and the K-means algorithm is used for clustering training, which makes the classification of the algae pictures taken. The realization of the system effectively prevented the large-scale outbreak of cyanobacteria, providing a new idea for monitoring and processing cyanobacteria blooms.


Development ◽  
1998 ◽  
Vol 125 (14) ◽  
pp. 2555-2563 ◽  
Author(s):  
K. Schneitz ◽  
S.C. Baker ◽  
C.S. Gasser ◽  
A. Redweik

Our understanding of the molecular mechanisms that regulate and integrate the temporal and spatial control of cell proliferation during organ ontogenesis, particularly of floral organs, continues to be primitive. The ovule, the progenitor of the seed, of Arabidopsis thaliana has been used to develop an effective model system for the analysis of plant organogenesis. A typical feature of a generalized ovule is the linear arrangement of at least three distinct elements, the funiculus, chalaza and nucellus, along a proximal-distal axis. This pattern is supposed to be established during the early proliferative phase of ovule development. We provide genetic evidence that the young ovule primordium indeed is a composite structure. Two genes, HUELLENLOS and AINTEGUMENTA have overlapping functions in the ovule and differentially control the formation of the central and proximal elements of the primordium. The results indicate that proximal-distal pattern formation in the Arabidopsis ovule takes place in a sequential fashion, starting from the distal end. Furthermore, we show that HUELLENLOS also regulates the initiation and/or maintenance of integument and embryo sac ontogenesis and interestingly prevents inappropriate cell death in the young ovule.


mBio ◽  
2017 ◽  
Vol 8 (6) ◽  
Author(s):  
Riyue Liu ◽  
Yaxin Liu ◽  
Shichang Liu ◽  
Ying Wang ◽  
Kim Li ◽  
...  

ABSTRACT Superresolution imaging has revealed subcellular structures and protein interactions in many organisms. However, superresolution microscopy with lateral resolution better than 100 nm has not been achieved in photosynthetic cells due to the interference of a high-autofluorescence background. Here, we developed a photobleaching method to effectively reduce the autofluorescence of cyanobacterial and plant cells. We achieved lateral resolution of ~10 nm with stochastic optical reconstruction microscopy (STORM) in the sphere-shaped cyanobacterium Prochlorococcus and the flowering plant Arabidopsis thaliana. During the cell cycle of Prochlorococcus, we characterized the three-dimensional (3D) organization of the cell division protein FtsZ, which forms a ring structure at the division site and is important for cytokinesis of bacteria and chloroplasts. Although the FtsZ ring assembly process in rod-shaped bacteria has been studied extensively, it has rarely been studied in sphere-shaped bacteria. Similarly to rod-shaped bacteria, our results with Prochlorococcus also showed the assembly of FtsZ clusters into incomplete rings and then complete rings during cell division. Differently from rod-shaped bacteria, the FtsZ ring diameter was not found to decrease during Prochlorococcus cell division. We also discovered a novel double-Z-ring structure, which may be the Z rings of two daughter cells in a predivisional mother cell. Our results showed a quantitative picture of the in vivo Z ring organization of sphere-shaped bacteria. IMPORTANCE Superresolution microscopy has not been widely used to study photosynthetic cells due to their high-autofluorescence background. Here, we developed a photobleaching method to reduce the autofluorescence of cyanobacteria and plant cells. After photobleaching, we performed superresolution imaging in the cyanobacterium Prochlorococcus and the flowering plant Arabidopsis thaliana with ~10-nm resolution, which is the highest resolution in a photosynthetic cell. With this method, we characterized the 3D organization of the cell division protein FtsZ in Prochlorococcus. We found that the morphological variation of the FtsZ ring during cell division of the sphere-shaped cyanobacterium Prochlorococcus is similar but not identical to that of rod-shaped bacteria. Our method might also be applicable to other photosynthetic organisms. IMPORTANCE Superresolution microscopy has not been widely used to study photosynthetic cells due to their high-autofluorescence background. Here, we developed a photobleaching method to reduce the autofluorescence of cyanobacteria and plant cells. After photobleaching, we performed superresolution imaging in the cyanobacterium Prochlorococcus and the flowering plant Arabidopsis thaliana with ~10-nm resolution, which is the highest resolution in a photosynthetic cell. With this method, we characterized the 3D organization of the cell division protein FtsZ in Prochlorococcus. We found that the morphological variation of the FtsZ ring during cell division of the sphere-shaped cyanobacterium Prochlorococcus is similar but not identical to that of rod-shaped bacteria. Our method might also be applicable to other photosynthetic organisms.


Development ◽  
2002 ◽  
Vol 129 (18) ◽  
pp. 4291-4300
Author(s):  
Sureshkumar Balasubramanian ◽  
Kay Schneitz

The ovules of Arabidopsis show polarity along the proximal-distal and the adaxial-abaxial axis. NOZZLE, a gene that encodes a novel protein and BELL1, encoding a homeodomain protein, play a vital role in pattern formation along the proximal-distal axis. INNER NO OUTER, which encodes a member of the YABBY family of transcription factors and SUPERMAN, encoding a zinc finger transcription factor, are essential for the establishment and maintenance of adaxial-abaxial polarity. To date, the co-ordination of patterning along these two axes is unclear. Here we show that NOZZLE plays a vital role in pattern formation along the adaxial-abaxial axis as well. We investigated the expression of INNER NO OUTER in various mutant backgrounds and have identified ABERRANT TESTA SHAPE and NOZZLE as spatial regulators of INNER NO OUTER expression. In addition, we show that NOZZLE and AINTEGUMENTA, which encodes an AP2 domain transcription factor, regulate the temporal expression of INNER NO OUTER and that BELL1 is essential for INNER NO OUTER expression. We further analysed the expression of BELL1 and AINTEGUMENTA in inner no outer mutants and show that the positive auto-regulatory control of INNER NO OUTER expression involves AINTEGUMENTA. Based on our results we propose a model for adaxial-abaxial pattern formation during ovule development. Our results indicate that NOZZLE plays a central role in patterning both the proximal-distal and the adaxial-abaxial axes. Furthermore, negatively regulating INO expression in a temporal manner, ensures that the adaxial-abaxial polarity is established after the specification of the chalaza, a proximal-distal axis pattern element. It therefore serves as a molecular link between these processes during ovule development in Arabidopsis thaliana.


Development ◽  
2000 ◽  
Vol 127 (19) ◽  
pp. 4227-4238 ◽  
Author(s):  
S. Balasubramanian ◽  
K. Schneitz

With the characterisation of the NOZZLE gene we aim at a better understanding of the molecular and genetic mechanism underlying pattern formation and growth control during floral organogenesis. Our data indicate that NOZZLE links these processes during ovule development. In the ovule primordium NOZZLE plays a central role in the formation of the nucellus through antagonizing the activities of BELL, AINTEGUMENTA and INNER NO OUTER, all encoding putative transcription factors, in the prospective nucellar region. We provide evidence that NOZZLE and BELL are chalaza identity genes that share overlapping functions in establishing the prospective chalaza of the ovule. In addition, NOZZLE plays a role in controlling the cell number and by this means the length of the funiculus, again through antagonizing AINTEGUMENTA and INNER NO OUTER function. NOZZLE is also required for the development of the integuments. We show that during the initial phase of this process NOZZLE is transcriptionally regulated by AINTEGUMENTA and INNER NO OUTER. NOZZLE thus represents a downstream target of these two genes in the integument development pathway.


2004 ◽  
Vol 273 (2) ◽  
pp. 321-334 ◽  
Author(s):  
Patrick Sieber ◽  
Jacqueline Gheyselinck ◽  
Rita Gross-Hardt ◽  
Thomas Laux ◽  
Ueli Grossniklaus ◽  
...  

Author(s):  
Shengnan Lu ◽  
Vishal Ramadoss ◽  
Dimiter Zlatanov ◽  
Xilun Ding ◽  
Matteo Zoppi

Applications of deployable mechanisms can be found in aeronautic and civil engineering, often in the creation of unfolding large-scale structures with curved surfaces. This paper proposes novel mechanical networks, which are used to approximate three-dimensional surfaces, such as cuboids, ellipsoids, or hyperboloids. Each such deployable structure is assembled from unit Sarrus and scissor linkages of different sizes, has several decoupled degrees of freedom, and can take any shape within a different family of parameterized surfaces. Each degree of freedom controls a separate parameter in the equation describing the physical boundary of the linkage network. The size and placement of the unit linkages and their elements are analyzed and selected for obtaining the expected families of surfaces. CAD models and kinematic simulations demonstrate the abilities of the mechanisms to perform dynamically the desired approximation.


2001 ◽  
Author(s):  
Bradley Olson ◽  
Leonard Jason ◽  
Joseph R. Ferrari ◽  
Leon Venable ◽  
Bertel F. Williams ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document