Polarity sorting of actin filaments in cytochalasin-treated fibroblasts

1997 ◽  
Vol 110 (15) ◽  
pp. 1693-1704 ◽  
Author(s):  
A.B. Verkhovsky ◽  
T.M. Svitkina ◽  
G.G. Borisy
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Dynamic Network ◽  
Muscle Cells ◽  
Immunogold Labelling ◽  
Cultured Fibroblasts ◽  
Myosin S1 ◽  
Mixed Polarity ◽  
Myosin Interaction

The polarity of actin filaments is fundamental for the subcellular mechanics of actin-myosin interaction; however, little is known about how actin filaments are oriented with respect to myosin in non-muscle cells and how actin polarity organization is established and maintained. Here we approach these questions by investigating changes in the organization and polarity of actin relative to myosin II during actin filament translocation. Actin and myosin II reorganization was followed both kinetically, using microinjected fluorescent analogs of actin and myosin, and ultrastructurally, using myosin S1 decoration and immunogold labelling, in cultured fibroblasts that were induced to contract by treatment with cytochalasin D. We observed rapid (within 15 minutes) formation of ordered actin filament arrays: short tapered bundles and aster-like assemblies, in which filaments had uniform polarity with their barbed ends oriented toward the aggregate of myosin II at the base of a bundle or in the center of an aster. The resulting asters further interacted with each other and aggregated into bigger asters. The arrangement of actin in asters was in sharp contrast to the mixed polarity of actin filaments relative to myosin in non-treated cells. At the edge of the cell, actin filaments became oriented with their barbed ends toward the cell center; that is, the orientation was opposite to what was observed at the edge of nontreated cells. This rearrangement is indicative of relative translocation of actin and myosin II and of the ability of myosin II to sort actin filaments with respect to their polarity during translocation. The results suggest that the myosin II-actin system of non-muscle cells is organized as a dynamic network where actin filament arrangement is defined in the course of its interaction with myosin II.

scholarly journals Specification of Actin Filament Function and Molecular Composition by Tropomyosin Isoforms

2003 ◽  
Vol 14 (3) ◽  
pp. 1002-1016 ◽  
Author(s):  
Nicole S. Bryce ◽  
Galina Schevzov ◽  
Vicki Ferguson ◽  
Justin M. Percival ◽  
Jim J.-C. Lin ◽  
...  
Keyword(s):  
Cell Size ◽  
Functional Properties ◽  
Actin Filament ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Molecular Composition ◽  
Cellular Migration ◽  
Stress Fibers ◽  
Human Homologue ◽  
Tropomyosin Isoforms

The specific functions of greater than 40 vertebrate nonmuscle tropomyosins (Tms) are poorly understood. In this article we have tested the ability of two Tm isoforms, TmBr3 and the human homologue of Tm5 (hTM5NM1), to regulate actin filament function. We found that these Tms can differentially alter actin filament organization, cell size, and shape. hTm5NM1was able to recruit myosin II into stress fibers, which resulted in decreased lamellipodia and cellular migration. In contrast, TmBr3 transfection induced lamellipodial formation, increased cellular migration, and reduced stress fibers. Based on coimmunoprecipitation and colocalization studies, TmBr3 appeared to be associated with actin-depolymerizing factor/cofilin (ADF)-bound actin filaments. Additionally, the Tms can specifically regulate the incorporation of other Tms into actin filaments, suggesting that selective dimerization may also be involved in the control of actin filament organization. We conclude that Tm isoforms can be used to specify the functional properties and molecular composition of actin filaments and that spatial segregation of isoforms may lead to localized specialization of actin filament function.

scholarly journals The F-actin bundler α-actinin Ain1 is tailored for ring assembly and constriction during cytokinesis in fission yeast

2016 ◽  
Vol 27 (11) ◽  
pp. 1821-1833 ◽  
Author(s):  
Yujie Li ◽  
Jenna R. Christensen ◽  
Kaitlin E. Homa ◽  
Glen M. Hocky ◽  
Alice Fok ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Biochemical Properties ◽  
Ring Formation ◽  
Cross Linking ◽  
Contractile Ring ◽  
Mixed Polarity ◽  
Dividing Cells

The actomyosin contractile ring is a network of cross-linked actin filaments that facilitates cytokinesis in dividing cells. Contractile ring formation has been well characterized in Schizosaccharomyces pombe, in which the cross-linking protein α-actinin SpAin1 bundles the actin filament network. However, the specific biochemical properties of SpAin1 and whether they are tailored for cytokinesis are not known. Therefore we purified SpAin1 and quantified its ability to dynamically bind and bundle actin filaments in vitro using a combination of bulk sedimentation assays and direct visualization by two-color total internal reflection fluorescence microscopy. We found that, while SpAin1 bundles actin filaments of mixed polarity like other α-actinins, SpAin1 has lower bundling activity and is more dynamic than human α-actinin HsACTN4. To determine whether dynamic bundling is important for cytokinesis in fission yeast, we created the less dynamic bundling mutant SpAin1(R216E). We found that dynamic bundling is critical for cytokinesis, as cells expressing SpAin1(R216E) display disorganized ring material and delays in both ring formation and constriction. Furthermore, computer simulations of initial actin filament elongation and alignment revealed that an intermediate level of cross-linking best facilitates filament alignment. Together our results demonstrate that dynamic bundling by SpAin1 is important for proper contractile ring formation and constriction.

scholarly journals Bile canalicular contraction is coincident with reorganization of pericanalicular filaments and co-localization of actin and myosin-II.

1993 ◽  
Vol 41 (3) ◽  
pp. 353-363 ◽  
Author(s):  
N Tsukada ◽  
M J Phillips
Keyword(s):  
Intermediate Filaments ◽  
Actin Filaments ◽  
Brush Border Membrane ◽  
Myosin Ii ◽  
Bile Canaliculus ◽  
Intestinal Brush Border Membrane ◽  
Intestinal Brush Border ◽  
Bile Canalicular Contraction ◽  
Myosin Interaction ◽  
Apical Membranes

We examined the relationships between actin-myosin interaction and bile canalicular contraction using a new experimental model: cytoskeleton-enriched canalicular membranes (CCM). In CCM, the bile canaliculus compartment is isolated complete with membrane-attached pericanalicular actin filaments and the surrounding intermediate filament sheath. Immunofluorescence and immunoelectron microscopy showed that actin and myosin-II were distributed over pericanalicular microfilaments that insert into adherens (belt) junctions; intermediate filaments predominantly inserted into desmosomes. The addition of "contraction solution" (1 microM Ca2+, 1 mM ATP) resulted in closure of CCM lumens, which was interpreted as canalicular contraction. Contraction was also associated with shortening and/or twisting of canaliculi. Rearrangement of actin filaments and myosin-II with co-localization of actin and myosin was observed. Evidence is also provided for attachment of actin-myosin-II aggregates to intermediate filaments coincident with contraction, suggesting a key scaffold function for intermediate filaments of the canaliculus. Attention is drawn to the overall similarity of structure-function dynamics in hepatic apical membranes to those described in intestinal brush border membrane preparations. The results are consistent with dynamic actin-myosin interaction with co-localization of actin and myosin-II in filament clumps coincident with canalicular contraction.

scholarly journals Actin turnover maintains actin filament homeostasis during cytokinetic ring contraction

2017 ◽  
Vol 216 (9) ◽  
pp. 2657-2667 ◽  
Author(s):  
Ting Gang Chew ◽  
Junqi Huang ◽  
Saravanan Palani ◽  
Ruth Sommese ◽  
Anton Kamnev ◽  
...  
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Myosin Ii ◽  
Contractile Ring ◽  
Ring Contraction ◽  
Actin Turnover ◽  
Exogenous Addition ◽  
Turn Over

Cytokinesis in many eukaryotes involves a tension-generating actomyosin-based contractile ring. Many components of actomyosin rings turn over during contraction, although the significance of this turnover has remained enigmatic. Here, using Schizosaccharomyces japonicus, we investigate the role of turnover of actin and myosin II in its contraction. Actomyosin ring components self-organize into ∼1-µm-spaced clusters instead of undergoing full-ring contraction in the absence of continuous actin polymerization. This effect is reversed when actin filaments are stabilized. We tested the idea that the function of turnover is to ensure actin filament homeostasis in a synthetic system, in which we abolished turnover by fixing rings in cell ghosts with formaldehyde. We found that these rings contracted fully upon exogenous addition of a vertebrate myosin. We conclude that actin turnover is required to maintain actin filament homeostasis during ring contraction and that the requirement for turnover can be bypassed if homeostasis is achieved artificially.

scholarly journals Ordering of myosin II filaments driven by mechanical forces: experiments and theory

2018 ◽  
Vol 373 (1747) ◽  
pp. 20170114 ◽  
Author(s):  
Kinjal Dasbiswas ◽  
Shiqiong Hu ◽  
Frank Schnorrer ◽  
Samuel A. Safran ◽  
Alexander D. Bershadsky
Keyword(s):  
Actin Cytoskeleton ◽  
Actin Filament ◽  
Cell Biology ◽  
Striated Muscle ◽  
Myosin Ii ◽  
Muscle Cells ◽  
Self Organization ◽  
The Matrix ◽  
Filament Bundles ◽  
And Function

Myosin II filaments form ordered superstructures in both cross-striated muscle and non-muscle cells. In cross-striated muscle, myosin II (thick) filaments, actin (thin) filaments and elastic titin filaments comprise the stereotypical contractile units of muscles called sarcomeres. Linear chains of sarcomeres, called myofibrils, are aligned laterally in registry to form cross-striated muscle cells. The experimentally observed dependence of the registered organization of myofibrils on extracellular matrix elasticity has been proposed to arise from the interactions of sarcomeric contractile elements (considered as force dipoles) through the matrix. Non-muscle cells form small bipolar filaments built of less than 30 myosin II molecules. These filaments are associated in registry forming superstructures (‘stacks’) orthogonal to actin filament bundles. Formation of myosin II filament stacks requires the myosin II ATPase activity and function of the actin filament crosslinking, polymerizing and depolymerizing proteins. We propose that the myosin II filaments embedded into elastic, intervening actin network (IVN) function as force dipoles that interact attractively through the IVN. This is in analogy with the theoretical picture developed for myofibrils where the elastic medium is now the actin cytoskeleton itself. Myosin stack formation in non-muscle cells provides a novel mechanism for the self-organization of the actin cytoskeleton at the level of the entire cell. This article is part of the theme issue ‘Self-organization in cell biology’.

scholarly journals Enhancement of Actin-depolymerizing Factor/Cofilin-dependent Actin Disassembly by Actin-interacting Protein 1 Is Required for Organized Actin Filament Assembly in the Caenorhabditis elegans Body Wall Muscle

2006 ◽  
Vol 17 (5) ◽  
pp. 2190-2199 ◽  
Author(s):  
Kurato Mohri ◽  
Kanako Ono ◽  
Robinson Yu ◽  
Sawako Yamashiro ◽  
Shoichiro Ono
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Muscle Cells ◽  
Actin Depolymerizing Factor ◽  
Interacting Protein ◽  
Cellular Processes ◽  
Cytoskeletal Dynamics ◽  
End Capping

Regulated disassembly of actin filaments is involved in several cellular processes that require dynamic rearrangement of the actin cytoskeleton. Actin-interacting protein (AIP) 1 specifically enhances disassembly of actin-depolymerizing factor (ADF)/cofilin-bound actin filaments. In vitro, AIP1 actively disassembles filaments, caps barbed ends, and binds to the side of filaments. However, how AIP1 functions in the cellular actin cytoskeletal dynamics is not understood. We compared biochemical and in vivo activities of mutant UNC-78 proteins and found that impaired activity of mutant UNC-78 proteins to enhance disassembly of ADF/cofilin-bound actin filaments is associated with inability to regulate striated organization of actin filaments in muscle cells. Six functionally important residues are present in the N-terminal β-propeller, whereas one residue is located in the C-terminal β-propeller, suggesting the presence of two separate sites for interaction with ADF/cofilin and actin. In vitro, these mutant UNC-78 proteins exhibited variable alterations in actin disassembly and/or barbed end-capping activities, suggesting that both activities are important for its in vivo function. These results indicate that the actin-regulating activity of AIP1 in cooperation with ADF/cofilin is essential for its in vivo function to regulate actin filament organization in muscle cells.

The capactins, a class of proteins that cap the ends of actin filaments

1982 ◽  
Vol 299 (1095) ◽  
pp. 263-273 ◽  
Keyword(s):  
Skeletal Muscle ◽  
Actin Filament ◽  
Actin Filaments ◽  
Muscle Cells ◽  
Preliminary Evidence ◽  
The Other ◽  
Cellular Regulation ◽  
Filament Assembly ◽  
Filament Bundles

A number of proteins that bind specifically to the barbed ends of actin filaments in a cytochalasin-like manner have been purified to various degrees from a variety of muscle and non-muscle cells and tissues. Preliminary evidence also indicates that proteins that interact with the pointed ends of filaments are present in skeletal muscle. Because of their ability to cap one or the other end of an actin filament, we have designated this class of proteins as the ‘capactins’. On the basis of their effect on actin filament assembly and interaction in vitro , we propose that the capactins play important roles in cellular regulation of actin-based cytoskeletal and contractile functions. Our finding that the disappearance of actin filament bundles in virally transformed fibroblasts can be correlated with an increase in capactin activity in the extracts of these cells is consistent with this hypothesis.

scholarly journals Organization of actin in the leading edge of cultured cells: influence of osmium tetroxide and dehydration on the ultrastructure of actin meshworks.

1981 ◽  
Vol 91 (3) ◽  
pp. 695-705 ◽  
Author(s):  
J V Small
Keyword(s):  
Electron Microscopy ◽  
Actin Filament ◽  
Actin Filaments ◽  
Osmium Tetroxide ◽  
Cultured Cells ◽  
Leading Edge ◽  
Cultured Fibroblasts ◽  
Cell Biol ◽  
Filament Bundles

The ordered structure of the leading edge (lamellipodium) of cultured fibroblasts is readily revealed in cells extracted briefly in Triton X-100-glutaraldehyde mixtures, fixed further in glutaraldehyde, and then negatively stained for electron microscopy. By this procedure, the leading edge regions show a highly organised, three-dimensional network of actin filaments together with variable numbers of radiating actin filament bundles or microspikes. The use of Phalloidin after glutaraldehyde fixation resulted in a marginal improvement in filament order. Processing of the cytoskeletons though the additional steps generally employed for conventional electron microscopy resulted in a marked deterioration or complete disruption of the order of the actin filament networks. In contrast, the actin filaments of the stress fiber bundles were essentially unaffected. Thus, postfixation in osmium tetroxide (1% for 7 min at room temperature) transformed the networks to a reticulum of kinked fibers, resembling those produced by the exposure of muscle F-actin to OsO4 in vitro (P. Maupin-Szamier and T. D. Pollard. 1978. J. Cell Biol. 77:837--852). While limited exposure to OsO4 (0.2+ for 20 min at 0 degrees C) obviated this destruction, dehydration in acetone or ethanol, with or without post-osmication, caused a further and unavoidable disordering and aggregation of the meshwork filaments. The meshwork regions of the leading edge then showed a striking resemblance to the networks hitherto described in critical point-dried preparations of cultured cells. I conclude that much of the "microtrabecular lattice" described by Wolosewick and Porter (1979. J. Cell Biol. 82:114--139) in the latter preparations constitutes actin meshworks and actin filament arrays, with their associated components, that have been distorted and aggregated by the preparative procedures employed.

Degradation of α-actin filaments in venous smooth muscle cells in response to mechanical stretch

2003 ◽  
Vol 284 (5) ◽  
pp. H1839-H1847 ◽  
Author(s):  
Jeremy Goldman ◽  
Lin Zhong ◽  
Shu Q. Liu
Keyword(s):  
Smooth Muscle ◽  
Arterial Pressure ◽  
Smooth Muscle Cells ◽  
P38 Mapk ◽  
Actin Filament ◽  
Actin Filaments ◽  
Caspase 3 ◽  
Control Level ◽  
Muscle Cells ◽  
Mechanical Stretch

Mechanical stretch has been shown to induce the degradation of α-actin filaments in smooth muscle cells (SMC) of experimental vein grafts. Here, we investigate the possible role of ERK1/2 and p38 MAPK in regulating this process using an ex vivo venous culture model that simulates an experimental vein graft. An exposure of a vein to arterial pressure induced a significant increase in the medial circumferential strain, which induced rapid α-actin filament disruption, followed by degradation. The percentage of SMC α-actin filament coverage was reduced significantly under arterial pressure (91 ± 1%, 43 ± 13%, 51 ± 5%, 28 ± 3%, and 19 ± 5% at 1, 6, 12, 24, and 48 h, respectively), whereas it did not change significantly in specimens under venous pressure at theses times. The degradation of SMC α-actin filaments paralleled an increase in the relative activity of caspase 3 (3.0 ± 0.7- and 1.7 ± 0.4-fold increase relative to the control level at 6 and 12 h, respectively) and a decrease in SMC density (from the control level of 1,368 ± 66 cells/mm2 at time 0 to 1,205 ± 90, 783 ± 129, 845 ± 61, 637 ± 55, and 432 ± 125 cells/mm2 at 1, 6, 12 , 24, and 48 h of exposure to arterial pressure, respectively). Treatment with a p38 MAPK inhibitor (SB-203580) significantly reduced the stretch-induced activation of caspase 3 at 6 h (from 3.0 ± 0.7- to 2.2 ± 0.3-fold) in conjunction with a significant rescue of α-actin filament degradation (from 43 ± 13% to 69 ± 15%) at the same time. Treatment with an inhibitor for the ERK1/2 activator (PD-98059), however, did not induce a significant change in the activity of caspase 3 or the percentage of SMC α-actin filament coverage. These results suggest that p38 MAPK and caspase 3 may mediate stretch-dependent degradation of α-actin filaments in vascular SMCs.

scholarly journals Requirements for Hirano Body Formation

2014 ◽  
Vol 13 (5) ◽  
pp. 625-634 ◽  
Author(s):  
Paul Griffin ◽  
Ruth Furukawa ◽  
Cleveland Piggott ◽  
Andrew Maselli ◽  
Marcus Fechheimer
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Actin Binding ◽  
Hirano Bodies ◽  
Latrunculin B ◽  
Content Type ◽  
Inhibitory Domain

ABSTRACT Hirano bodies are paracrystalline F-actin-rich structures associated with diverse conditions, including neurodegeneration and aging. Generation of model Hirano bodies using altered forms of Dictyostelium 34-kDa actin-bundling protein allows studies of their physiological function and mechanism of formation. We describe a novel 34-kDa protein mutant, E60K, with a point mutation within the inhibitory domain of the 34-kDa protein. Expression of E60K in Dictyostelium induces the formation of model Hirano bodies. The E60K protein has activated actin binding and is calcium regulated, unlike other forms of the 34-kDa protein that induce Hirano bodies and that have activated actin binding but lack calcium regulation. Actin filaments in the presence of E60K in vitro show enhanced resistance to disassembly induced by latrunculin B. Actin filaments in model Hirano bodies are also protected from latrunculin-induced depolymerization. We used nocodazole and blebbistatin to probe the role of the microtubules and myosin II, respectively, in the formation of model Hirano bodies. In the presence of these inhibitors, model Hirano bodies can form but are smaller than controls at early times of formation. The ultrastructure of model Hirano bodies did not reveal any major difference in structure and organization in the presence of inhibitors. In summary, these results support the conclusion that formation of model Hirano bodies is promoted by gain-of-function actin filament bundling, which enhances actin filament stabilization. Microtubules and myosin II contribute to but are not required for formation of model Hirano bodies.

Sign in / Sign up

Export Citation Format

Share Document