scholarly journals Design and Development of an Automatic Calibration System for Digital High Voltmeter

2015 ◽  
Vol 03 (04) ◽  
pp. 123-128
Author(s):  
永勤 王
MAPAN ◽  
2021 ◽  
Author(s):  
Jintao Wang ◽  
Xiang Liu ◽  
Wencai Shi ◽  
Changhong Xu

AbstractHydrometers are widely used in industry for liquid density measurement. It is important to achieve rapid and high accuracy calibration for hydrometers. Based on the Archimedes principle, a fully automatic hydrometer calibration system in NIM was designed using Cuckow’s method. The liquid density of n-tridecane (C13H28)is calibrated with 441 g high-purity fused silica ring as the solid density standard. The buoyancy of hydrometer is measured by static weighing system with resolution 0.01 mg. The alignment between liquid surface and hydrometer scale was achieved by the lifting platform with the positioning accuracy of 10 μm. According to the weighing value of hydrometer in air and liquid, the density correction value at different scales is calculated. Hydrometer covering a full range (650–1500) kg/m3can be calibrated without changing the liquid. Taking the calibration data of PTB as reference, the experimental data show that the measurement uncertainty of this system is better than 0.3 division (k = 2).


Author(s):  
Bo-Lin Jian ◽  
Chi-Shiuan Tsai ◽  
Ying-Che Kuo ◽  
Yu-Sying Guo

2012 ◽  
Vol 468-471 ◽  
pp. 1490-1494
Author(s):  
Qi Ren ◽  
Tian Fei Ren

ABSTRACT:It introduces a kind of an Automatic Calibration System, especially for long-term drift of oil tank gauging system. long-term drift serious influence on measuring the accuracy and reliability of the system. With theory of Hydrostatic Tank Gauging[1](HTG),as soon as the long-term drift occurring, the detection drift of oil pressure valueΔp will drift,and soon other the parameters of tank Gauging will be occurred. Because the value of Δp is difficult to directly determine, This paper puts forward a kind of automatic calibration method to obtain Δp according to the fuel level drift Δh) indirectly,By means of the HTG double level switches and fuzzy control theory. At last, by MATLAB simulation verify the correctness of the system design.


Sensors ◽  
2020 ◽  
Vol 20 (13) ◽  
pp. 3650
Author(s):  
Grzegorz Grzeczka ◽  
Maciej Klebba

This article is focused on the calibration of digital multimeters, in which the concept and practical solutions for stations with software for automatic calibration are presented. This paper also presents the general structure of the measuring system, the application scheme, and the technical implementation of measuring stations, together with the software.


Sign in / Sign up

Export Citation Format

Share Document