MODELING OF TECHNOLOGICAL PROCESSES OF LOCKSMITH AND WELDING FUNCTIONING

2020 ◽  
Vol 13 (2) ◽  
pp. 12-21 ◽  
Author(s):  
Alla Zvyaginceva ◽  
Svetlana Sazonova ◽  
V. Kul'neva

A basic list of polluting components released into the air zone of production sites of the metalwork and welding division of the VASO facility has been established, with differentiation into 6 sectors with emission generators. It was found that the greatest contribution to the overall background of polluting components accumulation in terms of quantity is made by 2 sites: sandblasting and gas welding, the sector of plasma cutting and alloys based on it is distinguished by the variety of components allocated. Quantitative estimation of gross and maximum one-time emissions has been implemented. Analytical assessment recorded by: inorganic dust with SiO2 over 70 %, fixed at sandblasting sector, a slight excess of MPC and sector gas welding in the NO2 limit value with the MPC.

2020 ◽  
Author(s):  
Natal'ya Vasil'eva

Presents the current status in modelling of metallurgical processes considered by the model the mathematical model used in the description of the processes of copper production and their classification. Set out a system of methods and models in the field of mathematical modeling of technological processes, including balance sheet, statistics, optimization models, forecasting models and predictive models. For specific technological processes are developed: the model of the balance of the cycle of pyrometallurgical production of copper, polynomial model for prediction of matte composition on the basis of the passive experiment, predictive model of quantitative estimation of the copper content in the matte based on fuzzy logic. Of interest to students, postgraduates, teachers of technical universities, engineers and research workers who use mathematical methods for processing of data of laboratory and industrial experiments.


2021 ◽  
Vol 13 (16) ◽  
pp. 8786
Author(s):  
Mehreen Arshad ◽  
Yumna Sadef ◽  
Muhammad Bilal Shakoor ◽  
Muhammad Naeem ◽  
Farzana Bashir ◽  
...  

Generally white color of the skin is regarded as a feature of superiority and prettiness around the world. Both the males and females in Pakistan apply skin-lightening creams (SLC) but they do not know about the side-effects of their constituents. Skin-lightening products include SLC and related ointments. The SLC are made by mixing fates and water in standard procedure. Here, 20 SLC specimens were obtained and subjected to mercury, hydroquinone and the total plate count (TPC). The hydroquinone in SLC was determined using HPLC, mercury level was assessed by ICP OES and finally TPC were computing by utilizing nutrient media (Agar). The hydroquinone in SLC ranged from 0 to 7.14 ± 0.18% with a median value of 0.33%. In 25% of the studied samples, hydroquinone was not detected, 70% of the samples showed values within the limit and 5% of the samples (1 sample) had a hydroquinone concentration above the permissible limit defined by Pakistan (5%). The mercury ranged 0-7.7 ppm, with a median value of 2.5 ppm. Mercury was detected in 95% of the samples; thus, only 5% of the samples had no mercury. In turn, 20% had mercury within the limit value while 75% of the samples had concentration above the Pakistan standard limit (1 ppm). Moreover, TPC obtained in this study was less than the allowable value set according to European Union (EU). Hence, the SLC samples showed high concentration of toxic constituents which could cause deleterious skin diseases. Government must monitor such kind of cosmetic products regularly in order to reduce the danger.


2019 ◽  
Vol 111 (1) ◽  
pp. 91-103 ◽  
Author(s):  
Laura Betancur ◽  
Benjamin Margolin Rottman ◽  
Elizabeth Votruba-Drzal ◽  
Christian Schunn

1969 ◽  
Vol 21 (01) ◽  
pp. 134-143 ◽  
Author(s):  
W. D Walls ◽  
M. S Losowsky

SummaryA kinetic method for the quantitative estimation of plasma F.S.F. activity is described and discussed.This method was applied to normal subjects and to patients with chronic liver disease. The plasma F.S.F. activity was uninfluenced by either sex or age, and the normal range has been defined.A significant decrease in plasma F.S.F. activity was observed in patients with chronic liver disease. Subnormal levels of activity were found in 25% of such patients but were unrelated to episodes of abnormal haemorrhage. Plasma F.S.F. activity tended to be lower in patients with disease of greater clinical severity. In 2 patients showing clinical improvement there was an increase in plasma F. S. F. activity.It was confirmed that plasma fibrinogen levels increase with age.


2018 ◽  
pp. 76-89
Author(s):  
E. M. Avraamova ◽  
V. N. Titov

The analysis of present-time directions in the study of social development has allowed to identify the resource approach as the most productive one which enables to assess social dynamics through the range of resource characteristics of different population groups and abilities of the relevant groups to apply development resources in the current economic and institutional conditions. Basing on the sociological survey conducted by ISAP RANEPA, the quantitative estimation of material and social recourses of the population has been made; integral values of the resource potential have been calculated as well. The issues of social structure formation are analyzed through the aspect of resource availability; the barriers of Russian middle-class enlargement are defined.


The article is devoted to reengineering of technological processes - a method of their qualitative transformation on an innovative basis, which in turn assumes the availability of tools that make it possible to establish the economic efficiency and technical capability of such transformations of construction production, to identify the effect of their implementation. In this regard, the problem of forming a parametric model of reengineering of construction technological processes, which involves four enlarged groups of indicators that reflect the quantitative and qualitative characteristics of the processes: materials used, working time, machine time, spatial organization, is considered. It is established that parameters can have either an absolute (physical, cost) or relative (point, percentage) expression and also make their own decomposition. The practical significance of the provisions given in the article is determined by the development of methods of technical rationing, which leads to a reduction in the cost and duration of construction.


1969 ◽  
Vol 60 (4) ◽  
pp. 657-668 ◽  
Author(s):  
Frances J. Thomas ◽  
A. W. Steinbeck

ABSTRACT A modified method for the estimation of urinary pregnanetriol, pregnanetriol, pregnanetriolone, Δ5-pregnenetriol and tetrahydro S was investigated. The steroids, separated by chromatography, were measured quantitatively, tetrahydro S by reaction with blue tetrazolium and the other three as acetaldehydogenic substances. The excretion of these steroids was studied in suspected instances of adrenal and/or ovarian disease. Urinary pregnanetriol and tetrahydro S levels were normal in Cushing's syndrome, secondary adrenocortical carcinoma, the Stein-Leventhal syndrome, idiopathic hirsutism and hypertension. Tetrahydro S was doubtfully elevated in an instance of ectopic ACTH Cushing's syndrome. Pregnanetriol excretion was elevated in untreated cases of congenital adrenal hyperplasia and after treatment in some. Pregnanetriolone was found in all patients with congenital adrenal hyperplasia, including those receiving cortisone. Pregnanetriolone was also detected in Cushing's syndrome, secondary adrenocortical carcinoma, the Stein-Leventhal syndrome, ectopic ACTH Cushing's syndrome and suspected congenital adrenal hyperplasia. Δ5-pregnenetriol was present as a glucuronide in the Stein-Leventhal syndrome and idiopathic hirsutism. The diagnostic implications of these results are discussed.


Sign in / Sign up

Export Citation Format

Share Document