scholarly journals Research on Campus Energy Consumption Monitoring System Based on IPV6

2018 ◽  
Author(s):  
Jian-Ping ZHANG ◽  
Jie ZHOU ◽  
Qiu-Min LUO ◽  
Guang-Bin FAN
Keyword(s):  
Energy Consumption ◽  
Monitoring System ◽  
Campus Energy

Applying Research on Campus Energy-Saving Power Monitoring System

2014 ◽  
Vol 672-674 ◽  
pp. 499-502
Author(s):  
Li Ming Wei ◽  
Peng Xu
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Monitoring System ◽  
Specific Energy ◽  
Specific Energy Consumption ◽  
Energy Monitoring ◽  
Power Monitoring ◽  
The North ◽  
Key Technologies ◽  
Campus Energy

Campus energy consumption takes up a large proportion of the total expenses of the campus. At the same time power consumption is emphasis. In the paper design of campus energy monitoring system and key technologies are demonstrated. The above-mentioned scheme is applied in a university in the north of China. The energy-saving measures are studied combined with the characteristics of the specific energy consumption.

A Critical Study on Campus Energy Monitoring System and Role of IoT

2021 ◽  
Author(s):  
Mopuri Deepika ◽  
Merugu Kavitha ◽  
N. S. Kalyan Chakravarthy ◽  
J. Srinivas Rao ◽  
D. Mohan Reddy ◽  
...  
Keyword(s):  
Monitoring System ◽  
Critical Study ◽  
Energy Monitoring ◽  
Campus Energy

scholarly journals A Wireless Sensor Network with Enhanced Power Efficiency and Embedded Strain Cycle Identification for Fatigue Monitoring of Railway Bridges

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Glauco Feltrin ◽  
Nemanja Popovic ◽  
Kallirroi Flouri ◽  
Piotr Pietrzak
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Data Processing ◽  
Monitoring System ◽  
Life Assessment ◽  
Wireless Sensor ◽  
Quality Data ◽  
Railway Bridges ◽  
Strain Cycle

Wireless sensor networks have been shown to be a cost-effective monitoring tool for many applications on civil structures. Strain cycle monitoring for fatigue life assessment of railway bridges, however, is still a challenge since it is data intensive and requires a reliable operation for several weeks or months. In addition, sensing with electrical resistance strain gauges is expensive in terms of energy consumption. The induced reduction of battery lifetime of sensor nodes increases the maintenance costs and reduces the competitiveness of wireless sensor networks. To overcome this drawback, a signal conditioning hardware was designed that is able to significantly reduce the energy consumption. Furthermore, the communication overhead is reduced to a sustainable level by using an embedded data processing algorithm that extracts the strain cycles from the raw data. Finally, a simple software triggering mechanism that identifies events enabled the discrimination of useful measurements from idle data, thus increasing the efficiency of data processing. The wireless monitoring system was tested on a railway bridge for two weeks. The monitoring system demonstrated a good reliability and provided high quality data.

scholarly journals Energy Monitoring System for Existing Buildings in Indonesia

2018 ◽  
Vol 42 ◽  
pp. 01003
Author(s):  
Sentagi Sesotya Utami ◽  
Faridah ◽  
Na’im A. Azizi ◽  
Erlin Kencanawati ◽  
M. Akbar Tanjung ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Monitoring System ◽  
Local Governments ◽  
Energy Savings ◽  
Performance Testing ◽  
Cost Effective ◽  
Existing Buildings ◽  
Energy Monitoring ◽  
Building Permit ◽  
Significant Difference

Current studies conducted by JICA, AMPRI and IFC-World Bank, reported that large commercial buildings in Indonesia are not energy and water efficient. One of the cause is the lack of regulation. Meanwhile, effective regulations to reduce energy and water consumption are the concern mostly in a new building to obtain a building permit. This strategy is understandable as retrofitting existing buildings are often more difficult to be implemented, and enforcement is still a major issue in Indonesia. Local governments are currently working on streamlining building permit process as well as developing an online monitoring system for existing buildings. By applying a Building Energy Management System (BEMS) enables to reduce energy consumption up to 15%. An energy monitoring system was designed and installed through this research for Department of Nuclear Engineering and Engineering Physics (DNEEP) building, Faculty of Engineering, Universitas Gadjah Mada. It is a 20 years old two-story building used for educational activities, which consist of classrooms, laboratories, offices and storage spaces. An audit energy was done recently in 2015 where an energy consumption of 261.299,636 kWh/year.m2 was reported. In the existing condition, a power meter is inaccessible and therefore, the only feedback of occupancy behavior in the energy consumption is through the electricity bill. The previous study has shown that building occupants would behave more efficiently if the amount of energy used is notified, and the amount of energy savings are recorded. However, these energy monitoring systems are considered expensive and uniquely tailored for every building. This research aims to design and install a cost effective BEMS based on occupant’s satisfactory assessment of the lighting, acoustics, and air conditioning quality. The data will be used as a decision supporting system (DSS) by building management through the use of a GUI. The design of the interface was based on a survey result from the prospective users. Installed energy monitoring system uses a current sensor with an accuracy of 98% and a precision of 0.04 A while the voltage sensor with an accuracy of 98% and a precision of 0.58 V. The performance testing shows that the number of web clients influences delay of data transmission. The result of the survey shows that GUI is categorized as fair in design without a significant difference between the perceptions of users with and without survey supervision.

scholarly journals The methodical issues of industrial energy monitoring systems implementation

2020 ◽  
pp. 47-56
Author(s):  
V. Nakhodov ◽  
O. Borychenko ◽  
A. Cherniavskyi
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Monitoring System ◽  
Energy Management ◽  
Specific Energy ◽  
Management System ◽  
Specific Energy Consumption ◽  
Monitoring Systems ◽  
Energy Management System ◽  
Energy Monitoring

Statistics show that energy is one of the highest operating costs in a manufacturing enterprise. So, improving energy efficiency can lead to a significant increase in profits and reduce the impact of the enterprise on the environment. To increase the performance of energy efficiency activities, it is necessary to implement an energy management system. One of the components of this system is energy monitoring, which, in turn, is based on the periodic collection and analysis of data to assess the state of the monitoring objects in terms of energy efficiency. In this paper, the role and place of energy monitoring in the energy management system of an industrial enterprise are noted. The paper proposes the concept of creating energy monitoring system in industrial companies, which is based on the combination of a monitoring system based on specific energy consumption, and usage of group energy characteristics of production facilities. Implementing such energy monitoring systems will allow to conduct operational control of energy efficiency of production facilities by creating individual systems for monitoring energy efficiency, as well as successfully carry out such monitoring at the enterprise and its subdivisions over longer periods of time using specific energy consumption indicators. It also provides general guidelines for conducting energy monitoring. These guidelines were formed based on the results of studying various methods and scientific publications in the field of energy monitoring, as well as on the basis of practical experience in the development and implementation of energy management systems. Particular attention is paid to the issues of processing and analysis of information about the objects of energy monitoring of industrial enterprises. The practical application of the concept of creating energy monitoring systems envisages gradual improvement of the existing monitoring system based on the specific energy consumption, which will be further completely replaced with individual energy efficiency monitoring systems.

Air pollution assessment using a cost-effective device: the case study of the northern Latium coastal area.

2021 ◽  
Author(s):  
Daniele Piazzolla ◽  
Giancarlo Della Ventura ◽  
Andrea Terribili ◽  
Alessandra Conte ◽  
Sergio Scanu ◽  
...  
Keyword(s):  
Air Pollution ◽  
Particulate Matter ◽  
Energy Consumption ◽  
Monitoring System ◽  
Coastal Area ◽  
Cost Effective ◽  
Coastal Environment ◽  
Tyrrhenian Sea ◽  
Environment Monitoring ◽  
Mobile Monitoring

<p><span>The increase in urbanization requires intense energy consumption and causes an increase in emissions from transportation and industrial sources. As a result, a variety of pollutants are released into the atmosphere with negative effects on the health of organisms and ecosystems as well as on human health. In this perspective, coastal areas are considered "hot</span><span>spot</span><span>s" of environmental contamination since they often host multiple human activities. This issue is particularly dramatic close to important maritime hubs, as a matter of fact overall 25% of the world energy consumption (a major source of pollution) is employed for transport, and over 80% of world trade is carried by sea (Gobbi et al. 2020). </span><span>During 2019-2020 we carried out a continuous monitoring of particulate matter in a fixed station to understand the sources of air pollution in the northern Latium coastal area. This area has been selected for the presence of industrial activities located in a few kilometers of coast (Piazzolla et al. 2020). </span><span>The amount and typology of solid particles present in the environment have been assessed by implementing a reliable cost-effective device (Gozzi et al. 2015, 2017) which integrates an optical particle counter and a filtering set-up able to collect particulate matter with dimension > 400 nm (Della Ventura et al. 2017). Filters were periodically removed from the device and recovered microparticles were subjected to microscopic (optical and electron), spectroscopic (IR, Raman), and microchemical (SEM-EDS) characterization. Results were related to the wind speed and direction measured by</span><span> the </span>Civitavecchia Coastal Environment Monitoring System<span> (</span><span>Bonamano et al. 2015), allowing an evaluation of the contribution of anthropic (industrial and maritime) activities to the pollution in this area.</span></p><p>Bonamano S., Piermattei V., Madonia A., Mendoza F., Pierattini A., Martellucci R., ... <span>& Marcelli M. (2016). The Civitavecchia Coastal Environment Monitoring System (C-CEMS): a new tool to analyze the conflicts between coastal pressures and sensitivity areas. Ocean Science, 12(1).</span><span> DOI 10.5194/os-12-87-2016</span></p><p><span>Della Ventura G., Gozzi F., Marcelli A. (2017) The MIAMI project: design and testing of an IoT lowcost device for mobile monitoring of PM and gaseous pollutants. Superstripe Press, Science Series, 12, 41-44, ISBN 9788866830764</span></p><p>Gobbi G.P., Di Liberto L., Barnaba F. (2020). <span>Impact of port emissions on Eu-regulated and non-regulated air quality indicators: the case of Civitavecchia (Italy). Science of the Total environment, 719. DOI 10.1016/j.scitotenv.2019.134984 </span></p><p><span>Gozzi, F., Della Ventura, G., Marcelli, A. (2015) Mobile monitoring of particulate matter: State of art and perspectives. Atmospheric Pollution Research, 7, 228-234. DOI 10.1016/j.apr.2015.09.007.</span></p><p><span>Gozzi F., Della Ventura G., Marcelli A., Lucci F. (2017) Current status of particulate matter pollution in Europe and future perspectives: a review. Journal of Materials and Environmental Science, 8, 1901-1909. ISSN 2028-2508</span></p><p><span>Piazzolla D., Cafaro V., de Lucia G. A., Mancini E., Scanu S., Bonamano S., ... & Marcelli M. (2020). Microlitter pollution in coastal sediments of the northern Tyrrhenian Sea, Italy: microplastics and fly-ash occurrence and distribution. </span>Estuarine, Coastal and Shelf Science, 106819. DOI 10.1016/j.ecss.2020.106819</p>

scholarly journals Physical Wellbeing Monitoring Employing Non-Invasive Low-Cost and Low-Energy Sensor Socks

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2822 ◽  
Author(s):  
Laura García ◽  
Lorena Parra ◽  
Jose Jimenez ◽  
Jaime Lloret
Keyword(s):  
Energy Consumption ◽  
Monitoring System ◽  
Low Cost ◽  
Wearable Devices ◽  
Initial Energy ◽  
Low Energy ◽  
Non Invasive ◽  
Energy Sensor ◽  
Physical Wellbeing ◽  
Evaluation Module

Determining and improving the wellbeing of people is one of the priorities of the OECD countries. Nowadays many sensors allow monitoring different parameters in regard to the wellbeing of people. These sensors can be deployed in smartphones, clothes or accessories like watches. Many studies have been performed on wearable devices that monitor certain aspects of the health of people, especially for specific diseases. In this paper, we propose a non-invasive low-cost and low-energy physical wellbeing monitoring system that provides a wellness score based on the obtained data. We present the architecture of the system and the disposition of the sensors on the sock. The algorithm of the system is presented as well. The wellness threshold evaluation module allows determining if the monitored parameter is within healthy ranges. The message forwarding module allows decreasing the energy consumption of the system by detecting the presence of alerts or changes in the data. Finally, a simulation was performed in order to determine the energy consumption of the system. Results show that our algorithm allows saving 44.9% of the initial energy in 10,000 min for healthy people.

Sign in / Sign up

Export Citation Format

Share Document