Pollution Status of Trace Metals in Waste Impacted Soils within Borokiri Town, Port Harcourt Metropolis, Rivers State, Nigeria

Author(s):  
Godwin Asukwo Ebong ◽  
Cyril Ita Ekong
2005 ◽  
Vol 5 (9) ◽  
pp. 01-21
Author(s):  
Alexander Hart ◽  
◽  
Oboh CA ◽  
Barimalaa IS ◽  
TG Sokari

Concentrations of the trace metals lead, iron, copper and zinc were estimated in crops harvested in some oil prospecting locations in Rivers State, Nigeria. The locations were; Agbada-Aluu (AA), Ebocha (EB), Idu Ekpeye (IE), Obagi (OB) and Trans Amadi Layout (TA), with the Teaching and Research Farm of Rivers State University of Science and Technology, Port Harcourt as control. Crops investigated were cassava (Manihot esculenta), cocoyam (Colocasia esculenta), okra (Hibiscus esculentus), pumpkin leaves (Telfairia occidentalis) and waterleaf (Talinum traingulare). Results of the mean lead concentrations were from 1.1µg/g in cocoyam to 9.1 µg/g in okro, showing higher trends in the industrialized areas. While cocoyam had the lowest lead concentration, the concentration rest of the crops did not differ significantly from one another. Crops from locations TA, OB, IE and EB had significantly higher concentrations of lead, although IE, AA and TF were not significantly different from one another. Mean concentrations of iron were between 40 µg/g in cassava from TF, and 651 µg/g in pumpkin leaves from TA - the industrial base of Rivers State - reflecting a high level of pollution from the various industries in that location. Differences in concentration of iron in crops showed pumpkin leaves to have the highest level of iron, followed by the other green vegetables – waterleaf and okra - although no significant differences occurred between okra, cocoyam and cassava. Copper concentrations were between 4.4 µg/g in cocoyam from locations TF and 23 µg/g in pumpkin leaves from TA. Pumpkin leaves had the highest concentrations of copper, followed by okra, then waterleaf, with cocoyam and cassava having the least significant levels. Zinc concentrations in crops were between 29 µg/g in cocoyam from TF to 240 µg/g in pumpkin leaves from EB. Pumpkin leaves and okra contained the highest levels of the metal, followed by waterleaf, then cassava and finally cocoyam. In terms of location, TA, OB and EB had the highest concentrations in crops, the least occurring in TF and AA. These results reflect higher concentrations of metals in crops from the industrialized locations, with the green vegetables, particularly pumpkin leaves, having the highest uptake, while cocoyam invariably had the least. These findings give cause for concern, particularly as heavy metals are bio-accumulative in the system and portend a serious health risk to man and animals.


Author(s):  
Vincent-Akpu Ijeoma Favour ◽  
Okoseimiema Ibifubara Joshua

The concentrations of trace metals; Lead (Pb), Iron (Fe), Copper (Cu), Zinc (Zn) and Cadmium (Cd) were determined in water, sediment and biota (Fish and plankton) from Ikpukulu-ama creek in Port Harcourt, Nigeria. The metals were analyzed using Atomic Absorption Spectrphotometer (AAS 500). Concentrations of metals in water were in the order of Cd<Cu<Pb<Zn<Fe, in sediments Cd<Cu<Pb<Zn<Fe, in fish Cd<Cu<Pb<Zn<Fe while in plankton the order of concentration were Cd=Pb<Cu<Zn<Fe. The mean concentrations of metals in surface water (mg/L) were 5.2, 0.83, 0.03, 0.46, and 0.01 for Fe, Zn, Cu, Pb and Cd respectively, in sediments (mg/g) the values were 16.0, 0.65, 0.09, 0.32, and 0.01 for the same metals. The mean concentrations of metals in fish (mg/g) were Fe (2.96), Zn (1.87), Cu (0.03), Pb (0.08) and Cd (<0.001), while for plankton (mg/L) were Fe (13.2), Zn (2.09), Cu (0.06), Pb (<0.001) and Cd (<0.001). The pollution index in the sediment was low. Trace metal concentrations in water, sediment and biota were below the maximum permissible levels recommended by National standard, but aquatic environment should be monitored regularly to avoid excess intake of metal into the water body.


2020 ◽  
Vol 6 (2) ◽  
pp. 23-28
Author(s):  
O. A. F Wokoma ◽  
◽  
O. S Edori ◽  

Wastewater samples were collected from an oil industry at the point of discharge for a period of two years, from January 2018 – December 2019. The wastewater samples were analyzed for different physicochemical parameters such as temperature, turbidity, total dissolved solids (TDS), total suspended solids (TSS), conductivity, pH, alkalinity, salinity, total hydrocarbon content (THC), biochemical oxygen demand (BOD) and chemical oxygen demand (COD) to examine their conformity to fulfill requirements as recommended by World Health Organization (WHO), Federal Ministry of Environment (FME) and Drinking Water Association (DWA). The results indicated that all the parameters in the discharged wastewater were within acceptable limits of the regulatory bodies. The field data showed that the investigated firm conformed to the law by carrying out proper procedures before discharging the effluents into the public drain and river. Therefore, the release of wastewater from the industry doesn't constitute a danger to the environment as well as aquatic organisms. Keywords: Physicochemical parameter, wastewater discharge, oil industry, environment, contaminants


2018 ◽  
Vol 5 (01-02 & Sp1) ◽  
Author(s):  
Utibe I. Daniel ◽  
◽  
Christiana C. Duru ◽  
Obemeata Oriakpono ◽  
M.O.E. Iwuala

Sign in / Sign up

Export Citation Format

Share Document