516 Effects of solid-liquid-vapor contact area at triple phase boundary on contact angle

2014 ◽  
Vol 2014.67 (0) ◽  
pp. _516-1_-_516-2_
Author(s):  
Norihiro ISHIMARU ◽  
Naohiro AZUKIZAWA ◽  
Gyoko NAGAYAMA ◽  
Takaharu TSURUTA
1996 ◽  
Vol 44 (4) ◽  
pp. 1657-1663 ◽  
Author(s):  
Yixiong Liu ◽  
R.M. German

2001 ◽  
Vol 15 (3) ◽  
pp. 730-735 ◽  
Author(s):  
Jean-Luc Daridon ◽  
Jérôme Pauly ◽  
João A. P. Coutinho ◽  
François Montel

2009 ◽  
Vol 12 (05) ◽  
pp. 702-712 ◽  
Author(s):  
Dayanand Saini ◽  
Dandina N. Rao

Summary The two-century-old Young's equation has been widely used in petroleum engineering to depict the reservoir wettability in terms of contact angle, which is a function of surface free energies of the system. For solid/liquid/vapor (S/L/V) systems, Young's equation has been modified in the recent literature to include a line-tension term. This modification was sought to accommodate the imbalance of intermolecular forces experienced by the three-phase confluence zone. Also, Young's equation does not account for the vertical component of liquid/vapor surface tension. The present study aims to experimentally investigate the applicability of the line-tension-based modification of Young's equation to solid/liquid/liquid (rock/oil/brine) (S/L/L) systems of interest to the petroleum industry. Both the ambient- and reservoir-condition optical cells were used, with stock-tank and live oil, respectively, to determine the drop-size dependence of dynamic contact angle subtended by the oil/brine interface with the rock surface. The experimental data were correlated with the modified Young's equation to determine the magnitude of line tension for different rock/oil/brine systems. To the best of our knowledge, this is the first attempt to apply the modified Young's equation to rock/oil/brine systems and to measure line tension for a rock/live-crude-oil/brine system at reservoir conditions of pressure and temperature. The measured line tension for S/L/L systems, while being positive and of the same order of magnitude as in S/L/V systems, correlates well with the water-advancing contact angle and the adhesion number, a ratio of adhesion force to capillary force. This experimental study indicates that the extent of deviation from Young's equation exhibited by rock/oil/brine systems may be directly related to the rock/oil adhesion interaction. This study reinforces the need to include the rock/oil adhesion force in our consideration of rock/fluid interactions, wettability, and their impact on enhanced-oil-recovery (EOR)/improved-oil-recovery (IOR) processes.


2020 ◽  
Vol 12 ◽  
Author(s):  
Nihar Ranjan Biswal

Background: Surfactant adsorption at the interfaces (solid–liquid, liquid–air, or liquid–liquid) is receiving considerable attention from a long time due to its wide range of practical applications. Objective: Specifically wettability of solid surface by liquids is mainly measured by contact angle and has many practical importances where solid–liquid systems are used. Adsorption of surfactants plays an important role in the wetting process. The wetting behaviours of three plant-based natural surfactants (Reetha, Shikakai, and Acacia) on the glass surface are compared with one widely used nonionic synthetic surfactant (Triton X-100) and reported in this study. Methods: The dynamic contact angle study of three different types of plant surfactants (Reetha, Shikakai and Acacia) and one synthetic surfactant (Triton X 100) on the glass surface has been carried out. The effect of two different types of alcohols such as Methanol and amyl alcohol on wettability of shikakai, as it shows little higher value of contact angle on glass surface has been measured. Results: The contact angle measurements show that there is an increase in contact angle from 47° (pure water) to 67.72°, 65.57°, 68.84°, and 68.79° for Reetha, Acacia, Shikakai, and Triton X-100 respectively with the increase in surfactant concentration and remain constant at CMC. The change in contact angle of Shikakai-Amyl alcohol mixtures are slightly different than that of methanol-Shikakai mixture, mostly there is a gradual increase in contact angle with the increasing in alcohol concentration. Conclusion: There is no linear relationship between cos θ and inverse of surface tension. There was a linear increase in surface free energy results with increase in concentration as more surfactant molecules were adsorbing at the interface enhancing an increase in contact angle.


2021 ◽  
Author(s):  
Xu-Guang Song ◽  
Ming-Wei Zhao ◽  
Cai-Li Dai ◽  
Xin-Ke Wang ◽  
Wen-Jiao Lv

AbstractThe ultra-low permeability reservoir is regarded as an important energy source for oil and gas resource development and is attracting more and more attention. In this work, the active silica nanofluids were prepared by modified active silica nanoparticles and surfactant BSSB-12. The dispersion stability tests showed that the hydraulic radius of nanofluids was 58.59 nm and the zeta potential was − 48.39 mV. The active nanofluids can simultaneously regulate liquid–liquid interface and solid–liquid interface. The nanofluids can reduce the oil/water interfacial tension (IFT) from 23.5 to 6.7 mN/m, and the oil/water/solid contact angle was altered from 42° to 145°. The spontaneous imbibition tests showed that the oil recovery of 0.1 wt% active nanofluids was 20.5% and 8.5% higher than that of 3 wt% NaCl solution and 0.1 wt% BSSB-12 solution. Finally, the effects of nanofluids on dynamic contact angle, dynamic interfacial tension and moduli were studied from the adsorption behavior of nanofluids at solid–liquid and liquid–liquid interface. The oil detaching and transporting are completed by synergistic effect of wettability alteration and interfacial tension reduction. The findings of this study can help in better understanding of active nanofluids for EOR in ultra-low permeability reservoirs.


2019 ◽  
Vol 19 (32) ◽  
pp. 23-31
Author(s):  
Abhishek Dhanda ◽  
Ryan O'Hayre ◽  
Heinz Pitsch

Sign in / Sign up

Export Citation Format

Share Document