Control system and gravity compensation method of the elastic tendon-driven robot arm considering tendon nonlinearity

Author(s):  
Tomoya SUZUKI ◽  
Junki TOGASHI ◽  
Kazuhisa MITOBE
2017 ◽  
Vol 41 (3) ◽  
pp. 443-455
Author(s):  
Kuo-Lan Su ◽  
Jian-Fu Weng ◽  
Jr-Hung Guo ◽  
Kai-Lu Cai

This article describes the design of an articulation robot arm with seven joints. The control core of the robot arm is the module-based system built using the Mitsubishi Q series programming logical controller (PLC). The robot arm contains seven AC servomotors, seven driver devices, a vision system and a PLC control system. The PLC-based controller programs the motion trajectory of the gripper to catch or hold the objects and finish the assigned tasks. Kinect system (Asus Xtion Pro-Live, or called RGB-D sensor) acts as the vision system to recognize shape and color of each object. During the experiments, we found that the robot arm recognizes the shape and color of each object, and catches each object moving to the assigned box with the same color.


Machines ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 318
Author(s):  
Liuquan Wang ◽  
Qiang Liu ◽  
Chenxin Zang ◽  
Sanying Zhu ◽  
Chaoyang Gan ◽  
...  

With commercial application of 5G networks, many researchers have started paying attention to real-time control in 5G networks. This paper focuses on dual auto guided vehicles collaborative transport scenarios and designs a formation control system in current commercial 5G networks. Firstly, the structure of the 5G network researched in this paper is introduced. Then the round-trip time of 5G networks is measured and analyzed. The result shows that although the 5G round-trip time has randomness, it is mainly concentrated in 19 ± 3 ms, and the jitter mainly in 0 ± 3 ms. The Kalman filter is applied to estimate the transmission delay and experiment result shows the effectiveness of the estimation. Furthermore, the total delay including transmission delay and execution delay in control system is discussed. After establishing the AGV kinematic and formation model, complete control system based on compensation method is proposed. Finally, an experiment is carried out. Compared to the result without formation control, maximum distance error is reduced by 82.61% on average, while maximum angle error 45.91% on average. The result shows the effectiveness of the control system in formation maintaining in 5G network.


Author(s):  
Trong-Thang Nguyen

In this research, the author presents the model of the two-link robot arm and its dynamic equations. Based on these dynamic equations, the author builds the sliding mode controller for each joint of the robot. The tasks of the controllers are controlling the Torque in each Joint of the robot in order that the angle coordinates of each link coincide with the desired values. The proposed algorithm and robot model are built on Matlab-Simulink to investigate the system quality. The results show that the quality of the control system is very high: the response angles of each link quickly reach the desired values, and the static error equal to zero.


2014 ◽  
Vol 496-500 ◽  
pp. 1413-1416 ◽  
Author(s):  
Hong Min Wang ◽  
Zhi Jiang Du ◽  
Zhi Kai Zhao ◽  
Rong Qiang Liu

A gravity compensation algorithm for master manipulator used in minimally invasive robot surgery is proposed in this paper. The Lagrange dynamic equation is used to solve the motor output torque for balancing the master gravity. To avoid time delay in signal processing, multi-thread and multi-event technology are used in software control system. With the algorithm, the force by hand is very small under the condition of exist gravity compensation, less output more than 90% of the external force compared with the lack of gravity compensation.


Author(s):  
Yusuke Wakita ◽  
Noboru Takizawa ◽  
Kentaro Nagata ◽  
Kazushige Magatani

Sign in / Sign up

Export Citation Format

Share Document