scholarly journals New Crushing Strength Formula of Aluminum Honeycomb with Thinning Cell Wall

2008 ◽  
Vol 74 (746) ◽  
pp. 1314-1320 ◽  
Author(s):  
Nagahisa OGASAWARA ◽  
Norimasa CHIBA ◽  
Masuhiro BEPPU ◽  
Yoichi KAWASHIMA ◽  
Eiji KOBAYASHI ◽  
...  
2010 ◽  
Vol 4 (8) ◽  
pp. 1338-1345 ◽  
Author(s):  
Nagahisa OGASAWARA ◽  
Norimasa CHIBA ◽  
Eiji KOBAYASHI ◽  
Yuji KIKUCHI

2008 ◽  
Vol 2008.21 (0) ◽  
pp. 71-72
Author(s):  
Nagahisa OGASAWARA ◽  
Norimasa CHIBA ◽  
Yoichi KAWASHIMA ◽  
Eiji KOBAYASHI ◽  
Yuji KIKUCHI

2013 ◽  
Vol 535-536 ◽  
pp. 377-380
Author(s):  
Ling Ling Hu ◽  
Tong Xi Yu

The y-directional mechanical properties of hexagonal honeycombs with various cell-wall angles are explored. The results of both the quasi-static experiments and the dynamic simulations show that the cell-wall angle has a significant influence on the honeycombs’ mechanical properties, although the latter is dominated by the honeycombs’ relative density. This influence is weakened by the increase of the impact velocity. With retaining the honeycombs’ relative density as constant, the honeycomb with the cell-wall angle of about 45o exhibits the optimal crushing strength and energy absorption capacity.


2021 ◽  
Author(s):  
Adrian X. Rivera ◽  
Satchi Venkataraman ◽  
Kim Hyonny ◽  
Evan J. Pineda ◽  
Andrew Bergan

2009 ◽  
Vol 2009 (0) ◽  
pp. 6-7
Author(s):  
Nagahisa OGASAWARA ◽  
Yuji NAKAMOTO ◽  
Norimasa CHIBA ◽  
Eiji KOBAYASHI ◽  
Yuji KIKUCHI
Keyword(s):  

2011 ◽  
Vol 15 (sup1) ◽  
pp. s155-s157 ◽  
Author(s):  
L L Hu ◽  
F F You ◽  
T X Yu
Keyword(s):  

2021 ◽  
pp. 109963622110536
Author(s):  
Vahid Pourriahi ◽  
Mohammad Heidari-Rarani ◽  
Amir Torabpour Isfahani

The hexagonal honeycomb core sandwich panels used in the satellite structure are subjected to severe vibration during launch. Therefore, the amounts of natural frequencies of these panels are of great importance for design engineers. Three-dimensional finite element modeling of the core considering all geometric parameters (i.e., a high-fidelity model) to achieve accurate results is not cost-effective. The honeycomb core is traditionally equivalent to a homogenized continuum core (i.e., a low-fidelity model) using simple analytical relations with ignoring the adhesive layer at the double cell-walls and radius of inclined cell-wall curvature. In this study, analytical formulations are first presented for the prediction of the equivalent elastic properties of a hexagonal aluminum honeycomb with considering all geometric parameters including adhesive layer thickness, cell-wall thickness, inclined cell-wall length, radius of inclined cell-wall curvature at the intersection, internal cell-wall angle, and honeycomb height. Then, two aluminum honeycomb core sandwich beams with free-free boundary conditions are modeled and analyzed in Abaqus finite element software, one with 3D high-fidelity core and the other with 3D low-fidelity core. In order to validate the results of the equivalent model, the modal analysis test was performed and the experimental natural frequencies were compared. The obtained results show a good agreement between the 3D low-fidelity and high-fidelity finite element models and experimental results. In addition, the influence of the above-mentioned geometric parameters has been investigated on the natural frequencies of a sandwich beam. [Formula: see text]


2009 ◽  
Vol 2009.22 (0) ◽  
pp. 170-171
Author(s):  
Nagahisa OGASAWARA ◽  
Norimasa CHIBA ◽  
Eiji KOBAYASHI ◽  
Yuji KIKUCHI

1997 ◽  
Vol 161 ◽  
pp. 491-504 ◽  
Author(s):  
Frances Westall

AbstractThe oldest cell-like structures on Earth are preserved in silicified lagoonal, shallow sea or hydrothermal sediments, such as some Archean formations in Western Australia and South Africa. Previous studies concentrated on the search for organic fossils in Archean rocks. Observations of silicified bacteria (as silica minerals) are scarce for both the Precambrian and the Phanerozoic, but reports of mineral bacteria finds, in general, are increasing. The problems associated with the identification of authentic fossil bacteria and, if possible, closer identification of bacteria type can, in part, be overcome by experimental fossilisation studies. These have shown that not all bacteria fossilise in the same way and, indeed, some seem to be very resistent to fossilisation. This paper deals with a transmission electron microscope investigation of the silicification of four species of bacteria commonly found in the environment. The Gram positiveBacillus laterosporusand its spore produced a robust, durable crust upon silicification, whereas the Gram negativePseudomonas fluorescens, Ps. vesicularis, andPs. acidovoranspresented delicately preserved walls. The greater amount of peptidoglycan, containing abundant metal cation binding sites, in the cell wall of the Gram positive bacterium, probably accounts for the difference in the mode of fossilisation. The Gram positive bacteria are, therefore, probably most likely to be preserved in the terrestrial and extraterrestrial rock record.


Sign in / Sign up

Export Citation Format

Share Document