scholarly journals Controller Design for Reaction Force of Specimen Considering Disturbance Suppression in Shaking Table Systems

2008 ◽  
Vol 74 (745) ◽  
pp. 2206-2213 ◽  
Author(s):  
Kenta SEKI ◽  
Motoharu KIKUCHI ◽  
Motohiro KAWAFUKU ◽  
Makoto IWASAKI ◽  
Hiromu HIRAI ◽  
...  
1996 ◽  
Vol 118 (4) ◽  
pp. 704-713 ◽  
Author(s):  
I. Sharf

This paper deals with manipulator systems comprising a long-reach manipulator (LRM) with a short-reach dextrous manipulator (SRM) attached to its end. The former, due to its size, is assumed to have significant structural flexibility, while the latter is modeled as a rigid robot. The particular problem addressed is that of active damping, or vibration suppression, of the LRM by using SRM specifically for that purpose Such a scenario is envisioned for operations where the large manipulator is used to deploy the small robot and it is necessary to damp out vibrations in LRM prior to operating SRM. The proposed solution to the problem uses the reaction force from SRM to LRM as a control variable which allows to effectively decouple the controller design problems for the two manipulators. A two-stage controller is presented that involves first, determining the trajectory of the short manipulator required to achieve a desired damping wrench to the supporting flexible arm and subsequently, brings the small manipulator to rest. Performance of the active damping algorithm developed is illustrated with a six-degree-of-freedom rigid manipulator on a flexible mast. Comparison to an independent derivative joint controller is included. The paper also discusses how the proposed methodology can be extended to address other issues related to operation of long-reach manipulator systems.


Author(s):  
Tsunehiro Wakasugi ◽  
Toru Watanabe ◽  
Kazuto Seto

This paper deals with a new system design method for motion and vibration control of a three-dimensional flexible shaking table. An integrated modeling and controller design procedure for flexible shaking table system is presented. An experimental three-dimensional shaking table is built. “Reduced-Order Physical Model” procedure is adopted. A state equation system model is composed and a feedback controller is designed by applying LQI control law to achieve simultaneous motion and vibration control. Adding a feedforward, two-degree-of-freedom control system is designed. Computer simulations and control experiments are carried out and the effectiveness of the presented procedure is investigated. The robustness of the system is also investigated.


Author(s):  
Hamidreza Kolbari ◽  
Soroush Sadeghnejad ◽  
Mohsen Bahrami ◽  
Kamali E. Ali

In a haptic teleoperation system, which interacts with unknown and hybrid environments, it is important to achieve stability and transparency. In medical usages, the utilization of knowledge on the tissues behavior in a controller design can improve the performance of the surgery in a robot-assisted telesurgery. Simultaneous interaction with hard and soft tissues makes it difficult to achieve stability and transparency. To deal with this difficulty, two controller schemes are designed. At first, a nonlinear mathematical model (inspired by the Hunt-Crossley (HC) model), which has the properties of soft and hard tissues, is combined with the slave side dynamic. In the second approach, the reaction force applied by hybrid tissues during the transition between tissues of different properties is modeled as an unknown force acting on the slave side. In a four-channel (4-CH) architecture, nonlinear adaptive controllers are designed without any knowledge about the parameters of the master, the slave robot, and the environment. For both control schemes, Lyapunov candidate functions provide a way to ensure the stability and transparency in the presence of uncertainties. The testbed comprises two Novint Falcon robots functioning as master and slave robots. Moreover, the experiments are performed on various objects, including a soft cube, a hard cube, and a phantom tissue. This paper rigorously evaluates the performances of the proposed methods, comparing them with each other and other previous schemes. Experimental and numerical results demonstrate the effectiveness of the proposed control schemes.


10.5772/7238 ◽  
2009 ◽  
Vol 6 (3) ◽  
pp. 25 ◽  
Author(s):  
Moyuru Yamada ◽  
Shigenori Sano ◽  
Naoki Uchiyama

Landing control is one of the important issues for biped walking robot, because robots are expected to walk on not only known flat surfaces but also unknown and uneven terrain for working at various fields. This paper presents a new controller design for a robotic foot to land on unknown terrain. The robotic foot considered in this study equips springs to reduce the impact force at the foot landing. There are two objectives in the landing control; achieving the desired ground reaction force and positioning the foot on unknown terrain. To achieve these two objectives simultaneously by adjusting the foot position, we propose a PI force controller with a desired foot position, which guarantees the robust stability of control system with respect to terrain variance, and exact positioning of the foot to unknown terrain. Simulation results using the Open Dynamics Engine demonstrate the effectiveness of the proposed controller.


Sign in / Sign up

Export Citation Format

Share Document