scholarly journals Synthesis Growth and Characterization of Mn doped La1.8Sr0.20CuO4

2011 ◽  
Vol 8 (1) ◽  
pp. 97-100
Author(s):  
Manish Verma ◽  
N. P. Lalla ◽  
D. M. Phase ◽  
V. K. Ahire
Keyword(s):  
Electron Microscopy ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Phase Purity ◽  
Reaction Method ◽  
X Ray ◽  
Temperature Method ◽  
Mn Doped ◽  
Scanning Electron

Polycrystalline samples of La1.8Sr0.20Cu1-yMnyO4 (0≤y≤0.15) were synthesized by solid state reaction method. The phase purity was confirmed by powder X-ray diffraction. The scanning electron microscopy was done on the La1.8Sr0.20Cu1-yMnyO4 (0≤y≤0.15) samples. The superconductivity and Transition temperature were studied by four probe resistivity temperature method. The transition temperatures were measured nearly 37 k and were unchanged on Mn doping at Cu site in La1.8Sr0.20CuO4.

scholarly journals Investigations of M3Al8O15:Eu3+,Dy3+ (M = Ba, Ca, Mg) phosphors

2016 ◽  
Vol 34 (2) ◽  
pp. 412-417
Author(s):  
Esra Öztürk
Keyword(s):  
Electron Microscopy ◽  
Solid State Reaction Method ◽  
Morphological Characterization ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Three Samples ◽  
Scanning Electron ◽  
The Eu

AbstractIn this work, aluminate type phosphorescence materials were synthesized via the solid state reaction method and the photoluminescence (PL) properties, including excitation and emission bands, were investigated considering the effect of trace amounts of activator (Eu3+) and co-activator (Dy3+). The estimated thermal behavior of the samples at certain temperatures (> 1000 °C) during heat treatment was characterized by differential thermal analysis (DTA) and thermogravimetry (TG). The possible phase formation was characterized by X-ray diffraction (XRD). The morphological characterization of the samples was performed by scanning electron microscopy (SEM). The PL analysis of three samples showed maximum emission bands at around 610 nm, and additionally near 589 nm, 648 nm and 695 nm. The bands were attributed to typical transitions of the Eu3+ ions.

Synthesis and Structural Characterization of La0.8Sr0.2MO3 (M=Mn, Fe, Co and Cr) Solid Ionic Material for Catalyst Application

2016 ◽  
Vol 840 ◽  
pp. 48-51
Author(s):  
Muhammad Nor Azri Aziz ◽  
Johar Banjuraizah ◽  
Shing Fhan Khor ◽  
Zainal Arifin Ahmad
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Raw Materials ◽  
Solid State Reaction Method ◽  
Cold Isostatic Pressing ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Scanning Electron

La0.8Sr0.2MO3+δ, (M=Mn, Fe, Cr, Co) ceramics were prepared by using solid state reaction method. All raw materials were mixed and ground using mortar. Homogenized powders were calcined at 900°C for three hour followed by grounding and uniaxial pressed at 100MPa. Compacted pellets were further pressed using cold isostatic pressing machine at 2600kg/m.s and sintered at 1300°C with heating rate 5°C/min for 4 hour. Crystal structure and phase transformation of sintered samples were obtained using X-ray diffraction. Density and porosity are measured by using Archimedes principle. The morphology of sintered samples is observed using scanning electron microscopy, while elemental analysis using the EDX.

scholarly journals Pengaruh Suhu Sintering Terhadap Sintesis Silicon Carbide (SiC) Berbahan Dasar Abu Sekam Padi dan Grafit Pensil 2B

2015 ◽  
Vol 5 (01) ◽  
pp. 31
Author(s):  
Resky Irfanita ◽  
Asnaeni Ansar ◽  
Ayu Hardianti Pratiwi ◽  
Jasruddin J ◽  
Subaer S
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Silicon Carbide ◽  
Rice Husk Ash ◽  
Sintering Temperature ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Scanning Electron

The objective of this study is to investigate the effect of sintering temperature on the synthesis of SiC produced from rice husk ash (RHA) and 2B graphite pencils. The SiC was synthesized by using solid state reaction method sintered at temperatures of 750°C, 1000°C and 1200°C for 26 hours, 11.5 hours and 11.5 hours, respectively. The quantity and crystallinity level of SiC phase were measured by means of Rigaku MiniFlexII X-Ray Diffraction (XRD). The microstructure of SiC was examined by using Tescan Vega3SB Scanning Electron Microscopy (SEM). The XRD results showed that the concentration (wt%) of SiC phase increases with the increasing of sintering temperature. SEM results showed that the crystallinity level of SiC crystal is improving as the sintering temperature increases

Effect of Sintering Temperature on (Bi2O3Fe2O3)0.8(Nb2O5)0.2

2017 ◽  
Vol 883 ◽  
pp. 3-6
Author(s):  
Sadia Tasnim Mowri ◽  
Quazi Delowar Hossain ◽  
M.A. Gafur ◽  
Aninda Nafis Ahmed ◽  
Muhammad Shahriar Bashar
Keyword(s):  
Electron Microscopy ◽  
Dielectric Property ◽  
Niobium Oxide ◽  
Sintering Temperature ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Reaction Method ◽  
X Ray ◽  
Scanning Electron

(Bi2O3Fe2O3)0.8(Nb2O5)0.2 was synthesized by solid state reaction method. (Bi2O3Fe2O3)0.8(Nb2O5)0.2 was made for the investigation of X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Dielectric property. XRD pattern reveals that three phases were obtained with Bismuth Iron Niobium Oxide. SEM elicits that grain size increases with the enhancement of sintering temperature. Dielectric property decreases with the augmentation of frequency.

Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)

2012 ◽  
Vol 620 ◽  
pp. 314-319
Author(s):  
Nur Amira Mamat Razali ◽  
Fauziah Abdul Aziz ◽  
Saadah Abdul Rahman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Alkaline Treatment ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Preliminary Preparation ◽  
Characterization Studies ◽  
Scanning Electron

Hardwood is wood from angiosperm trees. The characteristic of hardwood include flowers, endosperm within seeds and the production of fruits that contain the seeds. This paper aims to discuss the preparation and characterization of cellulose obtained from hardwood. The hardwood Merbau (Intsia bijuga) was chosen as raw material in this study. Alkaline treatment and delignification methods were used for the preparation of cellulose. Acid hydrolysis was employed to produce cellulose nanocrystal (CNC). The treated and untreated samples were characterized using x-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The final product, from both trated and untreated samples were then compared.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Characterization of a coating for radioprotection, by X-ray diffraction, scanning electron microscopy, and dispersive energy spectroscopy

2022 ◽  
Vol 321 ◽  
pp. 126326
Author(s):  
Gladis Aparecida Galindo Reisemberger de Souza ◽  
Ramón Sigifredo Cortés Paredes ◽  
Frieda Saicla Barros ◽  
Gustavo Bavaresco Sucharski ◽  
Sebastião Ribeiro Junior ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Phase Development and Dielectric Properties of 0.98BaTiO3-0.02Ba (Mg1/3Nb2/3) O3 Ceramic

2011 ◽  
Vol 700 ◽  
pp. 58-62
Author(s):  
Rachanusorn Roongtao ◽  
Supagorn Rugmai ◽  
Wanwilai C. Vittayakorn
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Dielectric Constant ◽  
Dielectric Properties ◽  
Loss Factor ◽  
X Ray Diffraction ◽  
Phase Purity ◽  
X Ray ◽  
Phase Development ◽  
Scanning Electron

The 0.98BaTiO3-0.02Ba (Mg1/3Nb2/3) O3ceramics has been synthesized through a conventional mixed-oxide by using BT nanopowder and BMN micropowder. The phase purity of the powders and the ceramics was examined using X-ray diffraction (XRD). The 0.98BT-0.02BMN powders were sintered to 92% of the theoretical density at a temperature of 1300 °C for 2 h. The microstructure of the sintered surface was investigated using scanning electron microscopy (SEM). The dielectric constant (εr) and loss factor (tanδ) of the sintered pellets at Curie temperture were 3000 and 0.015, respectively.

scholarly journals Synthesis and characterization of apatite silicated powders with wet precipitation method

2021 ◽  
Vol 234 ◽  
pp. 00106
Author(s):  
Houda Labjar ◽  
Hassan Chaair
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Analytical Techniques ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wet Precipitation ◽  
Scanning Electron

The synthesis of apatite silicated Ca10(PO4)6-x(SiO4)x(OH)2-x (SiHA) with 0≤x≤2 was investigated using a wet precipitation method followed by heat treatment using calcium carbonate CaCO3 and phosphoric acid H3PO4 and silicon tetraacetate SiC8H20O4 (TEOS) in medium of water ethanol, with three different silicate concentrations. After drying, the samples are ground and then characterized by different analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning electron Microscopy (SEM) and chemical analysis.

Sign in / Sign up

Export Citation Format

Share Document