scholarly journals Low-loss and broadband silicon mode filter using cascaded plasmonic BSWGs for on-chip mode division multiplexing

2019 ◽  
Vol 27 (21) ◽  
pp. 30429 ◽  
Author(s):  
W. Jiang ◽  
J. Miao ◽  
T. Li ◽  
L. Ma
Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1302
Author(s):  
Zhiyong Wu ◽  
Lei Zhang ◽  
Tingyin Ning ◽  
Hong Su ◽  
Irene Ling Li ◽  
...  

Surface plasmon polaritons (SPPs) have been attracting considerable attention owing to their unique capabilities of manipulating light. However, the intractable dispersion and high loss are two major obstacles for attaining high-performance plasmonic devices. Here, a graphene nanoribbon gap waveguide (GNRGW) is proposed for guiding dispersionless gap SPPs (GSPPs) with deep-subwavelength confinement and low loss. An analytical model is developed to analyze the GSPPs, in which a reflection phase shift is employed to successfully deal with the influence caused by the boundaries of the graphene nanoribbon (GNR). It is demonstrated that a pulse with a 4 μm bandwidth and a 10 nm mode width can propagate in the linear passive system without waveform distortion, which is very robust against the shape change of the GNR. The decrease in the pulse amplitude is only 10% for a propagation distance of 1 μm. Furthermore, an array consisting of several GNRGWs is employed as a multichannel optical switch. When the separation is larger than 40 nm, each channel can be controlled independently by tuning the chemical potential of the corresponding GNR. The proposed GNRGW may raise great interest in studying dispersionless and low-loss nanophotonic devices, with potential applications in the distortionless transmission of nanoscale signals, electro-optic nanocircuits, and high-density on-chip communications.


2013 ◽  
Vol 21 (11) ◽  
pp. 13522 ◽  
Author(s):  
Justin B. Spring ◽  
Patrick S. Salter ◽  
Benjamin J. Metcalf ◽  
Peter C. Humphreys ◽  
Merritt Moore ◽  
...  
Keyword(s):  
Low Loss ◽  

2017 ◽  
Vol 42 (14) ◽  
pp. 2802 ◽  
Author(s):  
Shipeng Wang ◽  
Xianglian Feng ◽  
Shiming Gao ◽  
Yaocheng Shi ◽  
Tingge Dai ◽  
...  

Circuit World ◽  
2020 ◽  
Vol 46 (3) ◽  
pp. 169-173
Author(s):  
Jin Guan ◽  
Min Gong ◽  
Bo Gao

Purpose A novel Ka-band compact parallel-coupled microstrip bandpass filter with harmonic suppression performance has been designed, implemented and tested on GaAs MMIC. Design/methodology/approach This proposed filter consists of modified coupled-line units with T-shaped open-stubs. Findings The proposed filter with T-shaped open-stubs is valuable in performance with low loss at fundamental frequency, suppression at harmonic frequencies and small size. The simulation is based on full-wave electromagnetic analysis and the measurement is based on chip test. It shows an insertion loss below 1.2 dB, return loss better than 20 dB in the pass band and high than 28 dB suppression at harmonic frequencies. Originality/value This Ka-band MMIC filter with harmonic suppression is attractive for the millimeter-wave system.


Nanophotonics ◽  
2018 ◽  
Vol 7 (10) ◽  
pp. 1679-1686 ◽  
Author(s):  
Zejie Yu ◽  
Yang Ma ◽  
Xiankai Sun

AbstractPhotonic integrated circuits (PICs) are an ideal platform for chip-scale computation and communication. To date, the integration density remains an outstanding problem that limits the further development of PIC-based photonic networks. Achieving low-loss waveguide routing with arbitrary configuration is crucial for both classical and quantum photonic applications. To manipulate light flows on a chip, the conventional wisdom relies on waveguide bends of large bending radii and adiabatic mode converters to avoid insertion losses from radiation leakage and modal mismatch, respectively. However, those structures usually occupy large footprints and thus reduce the integration density. To overcome this difficulty, this work presents a fundamentally new approach to turn light flows arbitrarily within an ultracompact footprint. A type of “photonic welding points” joining two waveguides of an arbitrary intersecting angle has been proposed and experimentally demonstrated. These devices with a footprint of less than 4 μm2can operate in the telecommunication band over a bandwidth of at least 140 nm with an insertion loss of less than 0.5 dB. Their fabrication is compatible with photonic foundry processes and does not introduce additional steps beyond those needed for the waveguides. Therefore, they are suitable for the mass production of PICs and will enhance the integration density to the next level.


Author(s):  
Patrick Rufangura ◽  
Thomas Folland ◽  
Arti Agrawal ◽  
Joshua D. Caldwell ◽  
Francesca Iacopi

Sign in / Sign up

Export Citation Format

Share Document