scholarly journals Multifunctional TiO2/ormosils organic-inorganic hybrid films derived by a sol-gel process for photonics and UV nanoimprint applications

2018 ◽  
Vol 9 (1) ◽  
pp. 304 ◽  
Author(s):  
Xuehua Zhang ◽  
Chu Xue ◽  
Wei Zhang ◽  
Liang Yu ◽  
Qian Wang ◽  
...  
Keyword(s):  
Sol Gel ◽  
Hybrid Films ◽  
Inorganic Hybrid ◽  
Sol Gel Process

Synthesis and Intermolecularly Mediated Assembly of Organic Pigment in Hybrid Coating Films

1998 ◽  
Vol 519 ◽  
Author(s):  
Y. Yan ◽  
Z. Duan ◽  
D.-G. Chen ◽  
S. Ray Chaudhuri
Keyword(s):  
Sol Gel ◽  
Hybrid Coating ◽  
Hypsochromic Shift ◽  
Hybrid Films ◽  
Coating Films ◽  
Organic Pigment ◽  
Inorganic Hybrid ◽  
Matrix Interactions ◽  
Sol Gel Process

AbstractThe insoluble, strongly hydrogen bonded organic pigment of 3,6-bis-(4-chlorphenyl)-l,4- diketopyrrolo [3,4-c] pyrrole was transiently blocked by adding carbamate groups, and consequently incorporated into organic-inorganic hybrid matrices by a sol-gel process. The homo- (pigment-pigment) and hetero-intermolecular (pigment-matrix) interactions were found to control both the assembly and dispersion of pigment molecules in the hybrid coating films. A weaker interaction between matrices and pigment molecules results in aggregation of the carbamate pigment in the methyl-silicate films. A stronger interaction forms a homogenous dispersion and coloration of the phenyl-silicate films. The as-prepared methyl- and phenylsilicate films doped with the organic pigment were distinguished by a morphology change and a blue (hypsochromic) shift in absorption from 550 to 460 nm. Thermal treatment can remove the carbamate groups and in-situ form the organic pigment in the hybrid films.

Photosensitive organic-inorganic hybrid films for photonic crystal using sol-gel process

2003 ◽  
pp. 331-340
Author(s):  
Hiroyo Segawa ◽  
Junichi Tabuchi ◽  
Kazuaki Yoshida ◽  
Toshiaki Kondo ◽  
Shigeki Matsuo ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Sol Gel ◽  
Hybrid Films ◽  
Inorganic Hybrid ◽  
Sol Gel Process

Dielectric Properties of PMMA-SiO2 Hybrid Films

2010 ◽  
Vol 644 ◽  
pp. 25-28 ◽  
Author(s):  
M.D. Morales-Acosta ◽  
M.A. Quevedo-López ◽  
Husam N. Alshareef ◽  
B.E. Gnade ◽  
R. Ramírez-Bon
Keyword(s):  
Dielectric Constant ◽  
Silicon Dioxide ◽  
Sol Gel ◽  
Molar Ratio ◽  
Hybrid Films ◽  
Metal Insulator ◽  
Inorganic Hybrid ◽  
Metal Insulator Metal ◽  
Sol Gel Process ◽  
Weak Trend

Organic-inorganic hybrid films were synthesized by a modified sol-gel process. PMMA-SiO2 films were prepared using methylmethacrylate (MMA), tetraethil-orthosilicate (TEOS) as silicon dioxide source, and 3-trimetoxi-silil-propil-methacrylate (TMSPM) as coupling agent. FTIR measurements were performed on the hybrid films to confirm the presence of PMMA-SiO2 bonding. In addition, metal-insulator-metal (MIM) devices were fabricated to study the dielectric constant of the films as function of frequency (1 KHz to 1 MHz). Electrical results show a weak trend of the dielectric constant of the hybrid films with MMA molar ratio. More importantly, the PMMA-SiO2 hybrid films showed a higher dielectric constant than SiO2 and PMMA layers, which is likely due to the presence of additional C-O-C bond.

UV Curable Organic-Inorganic Hybrid Materials

2000 ◽  
Vol 628 ◽  
Author(s):  
Guang-Way Jang ◽  
Ren-Jye Wu ◽  
Yuung-Ching Sheen ◽  
Ya-Hui Lin ◽  
Chi-Jung Chang
Keyword(s):  
Hybrid Materials ◽  
Colloidal Silica ◽  
Sol Gel ◽  
Solution Ph ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Degradation Temperature ◽  
Sol Gel Process ◽  
The Stability ◽  
Thermal Degradation Temperature

This work successfully prepared an UV curable organic-inorganic hybrid material consisting of organic modified colloidal silica. Applications of UV curable organic-inorganic hybrid materials include abrasion resistant coatings, photo-patternable thin films and waveguides. Colloidal silica containing reactive functional groups were also prepared by reacting organic silane and tetraethyl orthosilicate (TEOS) using sol-gel process. In addition, the efficiency of grafting organic moiety onto silica nanoparticles was investigated by applying TGA and FTIR techniques. Experimental results indicated a strong interdependence between surface modification efficiency and solution pH. Acrylate-SiO2 hybrid formation could result in a shifting of thermal degradation temperature of organic component from about 200°C to near 400°C. In addition, the stability of organic modified colloidal silica in UV curable formula and the physical properties of resulting coatings were discussed. Furthermore, the morphology of organic modified colloidal silica was investigated by performing TEM and SEM studies‥

The preparation of poly(methylsilsesquioxane) network-polyimide hybrid materials by the sol-gel process and their properties

1994 ◽  
Vol 6 (1) ◽  
pp. 43-52 ◽  
Author(s):  
Yoshitake Iyoku ◽  
Masa-aki Kakimoto ◽  
Yoshio Imai
Keyword(s):  
Hybrid Materials ◽  
Sol Gel ◽  
Tensile Modulus ◽  
Hybrid Films ◽  
Elongation At Break ◽  
Dimethyl Acetamide ◽  
Flexible Films ◽  
Sol Gel Process ◽  
Heating Up ◽  
Silicone Content

Poly(methylsilsesquixoane) network (silicone)-polyimide hybrid materials were successfully prepared by the sol-gel reaction of methyltriethoxysilane (MTES). The ethoxysilyl group in MTES was hydrolyzed and polycondensed in the solution of the polyamic acid, derived from pyromellitic dianhydride and bis(4-aminophenyl)ether, in N,N-dimethyl-acetamide (DMAc). The hybrid films were obtained by casting the reaction mixture, followed by heating up to 300°C. The hybrid materials containing 0-60wt% of silicone afforded flexible films. The films containing less than 7 wt% silicone were yellow and transparent, whereas the films with higher silicone content were yellow and opaque. Silicone particles with a diameter of around 1-10 μm were observed in the fracture surface of the hybrid films by scanning electron microscopy. Although the tensile strength and tensile modulus of the films obtained decreased with increasing silicone content. the value of the elongation at break remained at 60% up to 30% silicone content.

scholarly journals Preparation of Polyimide-Silica Hybrid Films Using Sol-Gel Process.

1992 ◽  
Vol 5 (2) ◽  
pp. 393-396 ◽  
Author(s):  
Atsushi Morikawa ◽  
Hidehiro Yamaguchi ◽  
Yoshitake Iyoku ◽  
Masa-aki Kakimoto ◽  
Yoshio Imai
Keyword(s):  
Sol Gel ◽  
Hybrid Films ◽  
Sol Gel Process ◽  
Silica Hybrid

Synthesis and characterization of hybrid films from hyperbranched polyester using a sol-gel process

2013 ◽  
Vol 131 (3) ◽  
pp. n/a-n/a ◽  
Author(s):  
Amélie Houel ◽  
Jocelyne Galy ◽  
Aurélia Charlot ◽  
Jean-François Gérard
Keyword(s):  
Sol Gel ◽  
Synthesis And Characterization ◽  
Hyperbranched Polyester ◽  
Hybrid Films ◽  
Sol Gel Process

Synthesis of Photosensitive Organic-Inorganic Hybrid Polymers via Anhydrous Sol-Gel Process for Integrated Optics

2003 ◽  
Vol 780 ◽  
Author(s):  
Xinshi Luo ◽  
Congji Zha ◽  
Barry Luther-Davies
Keyword(s):  
Low Cost ◽  
Sol Gel ◽  
Optical Loss ◽  
Hybrid Polymer ◽  
Optical Losses ◽  
Hybrid Polymers ◽  
Inorganic Hybrid ◽  
Wide Range ◽  
Integrated Optical ◽  
Sol Gel Process

AbstractPhotosensitive organic-inorganic hybrid polymers were synthesised for integrated optical and optoelectronic devices by a non-hydrous sol-gel process of hydrolysis/condensation of 3-methacryloxypropyltrimethoxysilane (MPS), diphenyldimethoxysilane (DPhDMS), and zirconium isopropoxide (TPZ) with boric acid under anhydrous conditions. The methacryl groups of MPS are UVpolymerizable, which are suitable for low cost fabrication of waveguides with a “UV write/develop” process. The incorporation of DPhDMS and TPZ was found useful in reducing the optical loss and in enhancing the thermostability of the polymer. The refractive index of the hybrid polymer is tuneable from 1.4950 to 1.5360 by variation of the ratio among MPS, DPhDMS and TPZ. Optical characterisation showed that the material has low optical losses at the telecommunications windows (0.16 dB/cm at 1310 nm and 0.4 dB/cm at 1550nm). The hybrid polymer also showed a low birefringence (1.2×10-4), a large thermo-optic (TO) coefficient (-2.77 ×10-4), and an outstanding linearity of dn/dT in a wide range of temperature (from 25 °C to 200 °C). Waveguides forming ability for the hybrid polymer with UV imprinting was also demonstrated.

Sign in / Sign up

Export Citation Format

Share Document