scholarly journals Comparison of Predicted and Experimental Behaviour of RC Slabs Subjected to Blast using SDOF Analysis

2018 ◽  
Vol 68 (2) ◽  
pp. 138 ◽  
Author(s):  
F. B. Mendonca ◽  
G. Urgessa ◽  
K. Iha ◽  
R. J. Rocha ◽  
J.A.F.F. Rocco
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Experimental Program ◽  
Reinforced Concrete Slab ◽  
Peak Displacement ◽  
Blast Damage ◽  
Reinforced Concrete Slabs ◽  
Military Facilities ◽  
Rc Slabs ◽  
Sdof Analysis

<p>Explosions emanating from terrorist attacks or military weapons cause damage to civilian and military facilities. Understanding the mechanical behaviour of reinforced concrete structures subjected to blast is of paramount importance for minimizing the possible blast damage. A full-scale experimental program consisting of six reinforced concrete slabs with compressive strengths of 60 MPa, 50 MPa and 40 MPa, measuring 1.0 m × 1.0 m × 0.08 m, and subjected to 2.7 kg of non-confined plastic bonded explosive, was conducted in blast test area of Science and Technology Aerospace Department (Brazilian Air Force). This paper compares experimentally measured peak displacement values with theoretical values. Theoretical analysis was carried out using single degree of freedom (SDOF) models. The comparison showed that SDOF analysis worked very well in predicting the reinforced concrete slab peak displacement against blast effects. Qualitative analysis after the experiments showed that the blast wave shape generated by the cylindrical explosive was not uniformly distributed on the slabs for the standoff distance of 0.927 m∕kg1/3.<br /><br /></p>

Behavior of Two-way RC Slabs Combination Strengthened with CFRP Strips and Steel Sheets

2014 ◽  
Vol 501-504 ◽  
pp. 1048-1052 ◽  
Author(s):  
Xiao Jin Li ◽  
Yi Yan Lu ◽  
Na Li
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Concrete Slabs ◽  
Test Results ◽  
Reinforced Concrete Slab ◽  
Steel Sheets ◽  
Reinforced Concrete Slabs ◽  
Rc Slab ◽  
Rc Slabs ◽  
Strengthening Technique

A total of four two-way reinforced concrete slabs strengthened with three methods were tested. The four test specimens were one unstrengthened reinforced concrete slab (control), one slab strengthened with CFRP strips, one slab strengthened with steel sheets, and one slab strengthened with an innovative method of applying CFRP strips and steel sheets combination bonding to the tension face of the slab. The test results show the CFRP-Steel combination strengthened technique is a rapid and effective strengthening technique for two-way RC slab. The increase in ultimate capacities of CFRP-Steel combination strengthened slab is 221.1% over the control slab, 84.4% over the CFRP-strengthened slab, and 45.2% over the steel-strengthened slab. In addition, the CFRP-Steel combination strengthened slab exhibited superior ductility than the CFRP-strengthened slab.

scholarly journals Natural Frequencies Reduction of RC Slab Subjected to Incremental Concentrated Loads

2019 ◽  
Vol 8 (3) ◽  
pp. 17
Author(s):  
Mezgeen S. Ahmed ◽  
Abdulhameed A. Yaseen ◽  
Fouad A. Mohammad
Keyword(s):  
Reinforced Concrete ◽  
Modal Analysis ◽  
Natural Frequencies ◽  
Concrete Slab ◽  
Experimental Modal Analysis ◽  
Experimental Program ◽  
Concentrated Loads ◽  
Reinforced Concrete Slab ◽  
Reinforced Concrete Slabs ◽  
Set Up

Reinforced concrete slabs are frequently used in many engineering structures such as buildings and bridges. Damages in an engineering structure including reinforced concrete slab are classified as light, moderate, and severe cracks. A special treatment is required for every typical crack-damage to strengthen its structure. The reinforced concrete slab experiencing cracks reduce stiffness as well as its strength. An experimental program was set up to establish a relation between cracks and changes of a dynamic system characteristics of the slab through natural frequencies. The aim is to perform experimental modal analysis (EMA) as a non-destructive vibration testing method for diagnosing the structural integrity of the slab. For this purpose, two RC square slabs specimens of dimensions 1200mm x 1200mm x 40mm were used. As a first part of the project, a reinforced concrete slab was subjected to an increasing partially concentrated loads at the slab’s center to introduce cracks. After each incremental load steps (5, 10, 12kN) the slab was unloaded. Then, a free-free set-up for the slab was established by using the flexible elastic ropes (bungee cords). After the dynamic test of 5, 10 and 12kN loads, the slab was strengthened using external CFRP sheets (type TR30S). Next, experimental modal analysis was performed to establish a relation between cracks and changes in natural frequencies of the slab. The overall trend of frequency decrease after occurring damage that would be expected for all modes. However, it is not guaranteed all modes have same sensitivity to the applied load that inflicts severe cracks.

Data Base for Punching Shear Strength of Reinforced Concrete Slabs and Evaluation for CCES Equation

2011 ◽  
Vol 90-93 ◽  
pp. 933-939 ◽  
Author(s):  
Qiu Ning Yang ◽  
Ming Jie Mao ◽  
Sumio Hamada
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Concrete Slab ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Reinforced Concrete Slab ◽  
Factors Affecting ◽  
Reinforced Concrete Slabs ◽  
Numerous Test ◽  
Rc Slabs

Several equations for punching shear strength of the reinforced concrete slab have been proposed in the world. These equations have their own factors affecting the strength. There are numerous test data for punching shear strength of RC slabs, which have been obtained by numerous researchers. A database with approximately 300 specimens has been structured through the present study. In the present study seven equations for punching shear strength are evaluated based on the database. CCES equation is also evaluated from the present database.

Pre-Test and Analysis of a Reinforced Concrete Slab Subjected to Blast From a Non-Confined Explosive

2018 ◽  
pp. 272-287
Author(s):  
Fausto B. Mendonça ◽  
Girum S. Urgessa
Keyword(s):  
Dynamic Analysis ◽  
Large Scale ◽  
Concrete Slab ◽  
Wave Parameter ◽  
Experimental Program ◽  
Small Scale ◽  
Maximum Displacement ◽  
Reinforced Concrete Slab ◽  
Test Experiment ◽  
Rc Slabs

A large scale experimental program consisting of testing 10 RC slabs with different variations of concrete compressive strength, reinforcement ratio and retrofit was conducted in Brazil. As part of that test program, a small-scale blast pre-test setup and associated dynamic analysis were conducted in order to confirm the proper functioning of the blast test sensors (pressure gages, displacement meter and accelerometers). The results of the pre-test were compared with theoretical blast wave parameter predictions using established equations and maximum displacement predictions using simplified dynamic analysis. The pre-test experiment provided useful insights and was shown to be critical for the success of the subsequent large scale blast tests.

Numerical Analysis of Anti-Impact Performances of the Reinforced Concrete Slab

2012 ◽  
Vol 249-250 ◽  
pp. 1063-1068
Author(s):  
Qian Ma ◽  
Dan Wu ◽  
Xu Dong Shi ◽  
Xiu Gen Jiang
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Concrete Strength ◽  
Impact Resistance ◽  
Reinforced Concrete Slab ◽  
Reinforced Concrete Slabs ◽  
Steel Bar ◽  
Parameterized Modeling ◽  
Element Theory ◽  
Bar Diameter

The influence of the structure parameters on the anti-impact performances of the reinforced concrete slab is studied in the article. The reinforced concrete model is established by using ANSYS 13.0/LS-DYNA and nonlinear finite element theory and the parameterized modeling is achieved. The results show that the increase of the thickness of the slab and the steel bar diameter result in the enhancement of impact resistant capability of the slab; a appropriate quantity of reinforcement is significant; Increasing the concrete strength has a distinct impact on the slab’s impact resistance when using relatively low strength concrete. However the influence becomes weak after the concrete strength comes to C60 and higher. The fruits are useful to the designing of reinforced concrete slabs.

Critical Review of Design Procedures for Reinforced Concrete Slabs as per IRC 112-2011

2019 ◽  
Vol 969 ◽  
pp. 349-354 ◽  
Author(s):  
J. Chithra ◽  
Praveen Nagarajan ◽  
A.S. Sajith ◽  
R.A. Roshan
Keyword(s):  
Reinforced Concrete ◽  
Critical Review ◽  
Concrete Slab ◽  
Concrete Slabs ◽  
Reinforced Concrete Slab ◽  
Finite Element Software ◽  
Reinforced Concrete Slabs ◽  
Distributed Load ◽  
Uniformly Distributed Load ◽  
Sandwich Model

Nowadays finite element software is used for the design and analysis of reinforced concrete slabs. This paper intends to have a critical review based on a comparison study between the three design methods and to estimate the amount of reinforcement to be provided in each case. The three methods discussed are; the three-layer sandwich model (IRC 112-2011), Wood Armer method (EN1992-1-1:2004) and the conventional design method as per IS 456-2000. In the recently revised code for bridges IRC 112-2011, there is a recommendation to adopt three-layer sandwich model for the design of reinforced concrete slab. In this paper, a critical review of this method is done, and it is used for slabs subjected to uniformly distributed load. This method is illustrated by considering the design of rectangular slab subjected to uniformly distributed load. The results of this method are compared with the results obtained using Wood Armer method and using the moment coefficients suggested in IS 456-2000.

THE EFFECT OF IMPACT LOADS ON PRESTRESSED CONCRETE SLABS

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Youmn Al Rawi ◽  
Yehya Temsah ◽  
Hassan Ghanem ◽  
Ali Jahami ◽  
Mohamad Elani
Keyword(s):  
Reinforced Concrete ◽  
Prestressed Concrete ◽  
Impact Loading ◽  
Concrete Slab ◽  
Concrete Slabs ◽  
Shear Mode ◽  
Reinforced Concrete Slab ◽  
Finite Element Program ◽  
Reinforced Concrete Slabs ◽  
The Impact

Many research studies have been conducted on the effect of impact loading on structures, and design procedures were proposed for reinforced concrete (RC) slabs; however the availability of these studies and procedures are limited for prestressed slabs. The proposed research will examine, using numerical analysis, the impact of rock fall on prestressed concrete slabs with equivalent moment capacity reinforced concrete slabs. It is expected that prestressed concrete slabs will have different behavior to resist impact loading compared with traditional reinforced concrete slabs. The thickness of the prestressed concrete slab will be 25cm whereas that of the reinforced concrete slab will be 30cm. The impact loading consists of 500Kg drop weight. The drop height will be 10m, 15m and 20m.The structural analysis is performed using a Finite Element program "ABAQUS". A comparison will be done between both slab types in terms of failure mode, damage, and deflection. It has been found that both slabs failed in punching. However, the RC slab performed better than the prestressed concrete slab with respect to the value of the deflection at mid-span, while both showed punching shear mode of failure.

BEHAVIOR OF REINFORCED CONCRETE SLABS UNDER ACCIDENTAL IMPACTS

2018 ◽  
Vol 5 (2) ◽  
Author(s):  
Shamsoon Fareed
Keyword(s):  
Reinforced Concrete ◽  
Impact Loading ◽  
Concrete Slab ◽  
High Mass ◽  
Concrete Slabs ◽  
Reinforced Concrete Slab ◽  
Reinforced Concrete Slabs ◽  
Numerical Predictions ◽  
Operational Life ◽  
The Impact

Loads resulting from activities such as rock fall, heavy drop weights (for e.g. equipment's, heavy machines during installation), missile and aircraft interaction with slabs may results in loading intensity which have higher magnitude as compared to static loading. Based on the velocity of the impacting object at the time of contact, these activities may result in impact loading. Therefore, slabs designed should provide resistance to these accidental loading during their entire operational life. In this study, a dynamic non-linear finite element analyses were conducted to investigate the behavior of the reinforced concrete slabs subjected to high-mass low-velocity impacts. For this purpose, initially an already published impact test results were used to validate the numerical predictions. Following validation, a study was conducted to investigate the influence of the impact velocity on the behavior of the reinforced concrete slab. Based on the numerical investigation, it was found that the velocity of the impacting object has a significant influence on the behavior exhibited by slab under impact loading. Furthermore, it was also found that the behavior of slab under impact is both local and global. Local behavior is associated with the damage caused at the contact area of the slab and the impactor, whereas global behavior refers to the overall deformation of the slab when stress waves move away from the impact zone and travel towards the supports.

scholarly journals Finite Difference Energy Method for nonlinear numerical analysis of reinforced concrete slab using simplified isotropic damage model

2014 ◽  
Vol 7 (6) ◽  
pp. 940-964
Author(s):  
M. V. A. Lima ◽  
J. M. F. Lima ◽  
P. R. L. Lima
Keyword(s):  
Reinforced Concrete ◽  
Finite Difference ◽  
Energy Method ◽  
Virtual Work ◽  
Concrete Slab ◽  
Damage Model ◽  
Flexural Behavior ◽  
Structural Element ◽  
Reinforced Concrete Slab ◽  
Reinforced Concrete Slabs

This work presents a model to predict the flexural behavior of reinforced concrete slabs, combining the Mazars damage model for simulation of the loss of stiffness of the concrete during the cracking process and the Classical Theory of Laminates, to govern the bending of the structural element. A variational formulation based on the principle of virtual work was developed for the model, and then treated numerically according to the Finite Difference Energy Method, with the end result a program developed in Fortran. To validate the model thus proposed have been simulated with the program, some cases of slabs in flexure in the literature. The evaluation of the results obtained in this study demonstrated the capability of the model, in view of the good predictability of the behavior of slabs in flexure, sweeping the path of equilibrium to the rupture of the structural element. Besides the satisfactory prediction of the behavior observed as positive aspects of the model to its relative simplicity and reduced number of experimental parameters necessary for modeling.

scholarly journals Investigation on Structural Behavior of Bamboo Reinforced Concrete Slabs under Concentrated Load

2021 ◽  
Vol 50 (1) ◽  
pp. 227-238
Author(s):  
Yanuar Haryanto ◽  
Nanang Gunawan Wariyatno ◽  
Hsuan-Teh Hu ◽  
Ay Lie Han ◽  
Banu Ardi Hidayat
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Absorption Capacity ◽  
Concrete Slabs ◽  
Structural Behaviour ◽  
Reinforced Concrete Slab ◽  
Concentrated Load ◽  
Steel Reinforced Concrete ◽  
Reinforced Concrete Slabs ◽  
Cracking Pattern

Reinforced concrete is perhaps the most widely used building material in the world. However, the materials used for reinforcement of concrete i.e. steel is quite expensive and scarcely available in the developing world. As a result, bamboo is considered to be a cheaper replacement with high tensile strength. This research investigated the structural behaviour of bamboo-reinforced concrete slabs used for footplate foundation subjected to concentrated load. For this purpose, four different reinforced concrete slab panels were developed and analyzed. The influence of replacing steel with bamboo for the reinforcement of concrete slabs on their structural behaviour was assessed by determining the load-deflection characteristics, the ultimate load, the stiffness, the ductility, the cracking pattern, and the energy absorption capacity. The results showed that in comparison to steel reinforced concrete slabs, the strength of 82% can be acquired by the bamboo reinforced slabs. Furthermore, ductility demonstrated by the two types of specimens was almost equivalent i.e. up to 93%. Those indicated that the structural behaviour demonstrated by bamboo reinforced slabs is quite comparable to that of steel reinforced concrete slabs. Therefore, bamboo can prove to be a promising substitute for steel in concrete reinforcement. Future studies may further examine this opportunity.

Sign in / Sign up

Export Citation Format

Share Document