DEVELOPMENT OF THE THREE DIMENSIONAL MODEL OF SURFACE ROUGHNESS OF PARTS OBTAINED BY TURNING

2017 ◽  
pp. 22-26 ◽  
Author(s):  
A. N. Sutyagin
Keyword(s):  
Surface Roughness ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model

scholarly journals Roughness effect on the efficiency of dimer antenna based biosensor

2012 ◽  
Vol 1 (2) ◽  
pp. 41 ◽  
Author(s):  
D. Barchiesi ◽  
S. Kessentini
Keyword(s):  
Surface Roughness ◽  
Near Field ◽  
Three Dimensional ◽  
Biological Molecules ◽  
Far Field ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Roughness Effect ◽  
Highly Sensitive ◽  
Local Plasmon

The fabrication process of nanodevices is continually improved. However, most of the nanodevices, such as biosensors present rough surfaces with mean roughness of some nanometers even if the deposition rate of material is more controlled. The effect of roughness on performance of biosensors was fully addressed for plane biosensors and gratings, but rarely addressed for biosensors based on Local Plasmon Resonance. The purpose of this paper is to evaluate numerically the influence of nanometric roughness on the efficiency of a dimer nano-biosensor (two levels of roughness are considered). Therefore, we propose a general numerical method, that can be applied to any other nanometric shape, to take into account the roughness in a three dimensional model. The study focuses on both the far-field, which corresponds to the experimental detected data, and the near-field, responsible for exciting and then detecting biological molecules. The results suggest that the biosensor efficiency is highly sensitive to the surface roughness. The roughness can produce important shifts of the extinction efficiency peak and a decrease of its amplitude resulting from changes in the distribution of near-field and absorbed electric field intensities.

Effect of Surface Roughness on Performance of Spiral Groove Gas Film Face Seal

2012 ◽  
Vol 184-185 ◽  
pp. 180-183 ◽  
Author(s):  
Gang Ma ◽  
Wei Zhao ◽  
Xin Min Shen
Keyword(s):  
Surface Roughness ◽  
Three Dimensional ◽  
Great Influence ◽  
Face Seal ◽  
Dimensional Model ◽  
Spiral Groove ◽  
Three Dimensional Model ◽  
Three Dimensional Flow ◽  
Gas Face Seal ◽  
Effect Of Surface

The three dimensional model was established for studying performance of spiral groove gas face seal. According to machining features of different surface area, the seal face can be divided into three parts, rotor ring grooved area, rotor ring non-grooved area and static ring area. The effect of roughness on seal performance was analyzed based on calculation of three dimensional flow field. The analysis results show that the surface roughness of rotor ring grooved area has great influence on the seal performance, but the influence is little when roughness on non-grooved rotor ring surface and static ring surface. The influence must be considered when surface roughness of rotor ring grooved area bigger than 0.2μm. Roughness of rotor ring surface can increase the loading force while it also can cause the increase of leakage. It is important to select rational roughness when designing gas face seal.

The Effects of Three-Dimensional Model Surface Roughness Features on Lubricant Film Thickness in EHL Contacts

2003 ◽  
Vol 125 (3) ◽  
pp. 533-542 ◽  
Author(s):  
Jian W. Choo ◽  
Romeo P. Glovnea ◽  
Andrew V. Olver ◽  
Hugh A. Spikes
Keyword(s):  
Surface Roughness ◽  
Film Thickness ◽  
Three Dimensional ◽  
Lubricant Film ◽  
Imaging Method ◽  
Dimensional Model ◽  
Lubricant Film Thickness ◽  
Model Surface ◽  
Three Dimensional Model ◽  
Spacer Layer

The Spacer Layer Imaging method has been used to investigate the influence of three-dimensional roughness features on the thickness and shape of elastohydrodynamic (EHL) films. An array of near-hemispherical bumps was employed to represent asperities. A micro-EHL film developed at the bumps whose orientation depended on that of the inlet boundary at the location at which the bump had entered the contact. Rolling-sliding conditions induced a micro-EHL film with a classical horseshoe shape at the bumps. The flow of lubricant around the bumps appeared to differ between thin and thick films.

Three-Dimensional Model for Virtual Surgical Simulation, during Complex Skull Base Surgery and Aneurysm Surgery

Skull Base ◽  
2008 ◽  
Vol 18 (S 01) ◽  
Author(s):  
Akio Morita ◽  
Toshikazu Kimura ◽  
Shigeo Sora ◽  
Kengo Nishimura ◽  
Hisayuki Sugiyama ◽  
...  
Keyword(s):  
Skull Base ◽  
Surgical Simulation ◽  
Skull Base Surgery ◽  
Three Dimensional ◽  
Aneurysm Surgery ◽  
Dimensional Model ◽  
Three Dimensional Model
Sign in / Sign up

Export Citation Format

Share Document