Fabric Surface Characteristics and their Impact on Digital Textile Printing Quality of PET Fabrics

2019 ◽  
Vol 6 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Jihye Lim ◽  
Lisa Parrillo Chapman
Keyword(s):  
Surface Characteristics ◽  
Textile Printing ◽  
Printing Quality ◽  
Digital Textile Printing ◽  
Fabric Surface

scholarly journals Effects on Printing Quality according to Yarn Twist and Knitting Structure of Media in Digital Textile Printing(II)

2011 ◽  
Vol 23 (1) ◽  
pp. 35-42
Author(s):  
Soon-Young Park ◽  
Dong-Won Jeon ◽  
Yoon-Cheol Park ◽  
Beom-Soo Lee
Keyword(s):  
Yarn Twist ◽  
Textile Printing ◽  
Printing Quality ◽  
Digital Textile Printing

scholarly journals Effects on Printing Quality according to Yarn Twist and Knitting Structure of Media in Digital Textile Printing(I)

2010 ◽  
Vol 22 (3) ◽  
pp. 282-291 ◽  
Author(s):  
Soon-Young Park ◽  
Dong-Won Jeon ◽  
Yoon-Cheol Park ◽  
Beom-Soo Lee
Keyword(s):  
Yarn Twist ◽  
Textile Printing ◽  
Printing Quality ◽  
Digital Textile Printing

scholarly journals The Impact of Post-Manufacture Treatments on the Surface Characteristics Important for Finishing of OSB and Particleboard

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 975
Author(s):  
Antonio Copak ◽  
Vlatka Jirouš-Rajković ◽  
Nikola Španić ◽  
Josip Miklečić
Keyword(s):  
Water Vapour ◽  
Oriented Strand Board ◽  
Construction Material ◽  
Surface Characteristics ◽  
Surface Treatments ◽  
Factors Affecting ◽  
Treatment Conditions ◽  
Water Vapour Absorption ◽  
The Impact

Oriented strand board (OSB) is a commonly used structural wood-based panel for walls and roof siding, but recently the industry has become interested in OSB as a substrate for indoor and outdoor furniture. Particleboard is mainly used in furniture productions and has become popular as a construction material due to its numerous usage possibilities and inexpensive cost. Moisture is one of the most important factors affecting wood-based panel performance and the post-treatment conditions affected their affinity to water. When OSB and particleboard are used as substrates for coatings, their surface characteristics play an important role in determining the quality of the final product. Furthermore, roughness can significantly affect the interfacial phenomena such as adsorption, wetting, and adhesion which may have an impact on the coating performance. In this research particleboard and OSB panels were sanded, re-pressed and IR heated and the influence of surface treatments on hardness, roughness, wetting, water, and water vapour absorption was studied. Results showed that sanding improved the wetting of particleboard and OSB with water. Moreover, studied surface treatments increased water absorption and water penetration depth of OSB panels, and re-pressing had a positive effect on reducing the water vapour absorption of particleboard and OSB panels.

The Influence of Paper Factors on Digital Printing Quality

2012 ◽  
Vol 182-183 ◽  
pp. 365-368
Author(s):  
Wei Feng Jing ◽  
Wen Yan Jiang
Keyword(s):  
Experimental Method ◽  
Digital Printing ◽  
Printing Industry ◽  
Printing Quality ◽  
Quick Turnaround ◽  
Digital Prints ◽  
Better Than

Digital printing has been playing a more and more important role in printing industry for its convenient production and quick turnaround. By experimental method, the differences of digital prints with different paper were detail analyzed, includes different base weight papers of the same category, and different categories papers with the same base weight. Results showed that the printing quality of offset paper with 120 g/m2base weight was better than that of 100 g/m2, and that printing quality of art paper was better than matt art paper with the same base weight. Other characteristics of different papers were investigated too. The method and conclusion provides in this paper would be helpful for choosing appropriate material for production activities.

Research and Application on Screen Soft Proofing Technology in Printing Quality Control

2012 ◽  
Vol 262 ◽  
pp. 263-268
Author(s):  
Zhan Jun Si ◽  
Jia Wang ◽  
Chong Gu
Keyword(s):  
Quality Control ◽  
Good Effect ◽  
Color Management ◽  
Actual Situation ◽  
Testing Scheme ◽  
Printing Quality ◽  
Display Technology ◽  
Soft Proofing ◽  
Display Performance

In recent years, screen soft proofing has matured with the development of color management and display technology, and it has become the direction of printing development and the key of promotion. This article aimed at raising a testing scheme of display performance and adjusting scheme of corresponding display parameters, on this account to test the professional display’s performance, adjust display parameters and make color management. At the same time with reflecting the actual situation of display, a stable and accurate color reproduction environment was provided for screen soft proofing. After that, evaluations were carried out to evaluate printing quality of screen soft proofing on the condition that display’s performance was good, consequently the differences between proofing effects and final printing were studied. The result shows that this testing scheme of display performance can reflect the truth of display which is tested in this paper, the display after adjusted and color management according to this scheme shows good effect in the ability of screen analog proofing original, it can approach the requirements of the printing proofing.

Effect of copper or carbon fiber addition to the 3D printing of polylactid samples

2020 ◽  
Vol 62 (7) ◽  
pp. 727-732
Author(s):  
L. Zárybnická ◽  
D. Machová ◽  
K. Dvořák
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Depth Of Field ◽  
3D Print ◽  
Fused Deposition ◽  
Printing Quality ◽  
Digital Microscope ◽  
Effect Of Copper ◽  
The Right

Abstract This paper presents the effect of additives on the quality of a product created by 3D print. The product is created by the most widely used 3D printing method - Fused Deposition Modeling (FDM). Polylactic acid (PLA) filaments are tested without and with the addition of carbon fibers or copper. The specimens are characterized by different methods, such as mechanical testing, measuring roughness by digital microscope with a large depth of field and thermal analysis. In fact, FDM is a problematic process with numerous criterions that affect printing quality. Printing parameters such as print temperature, pad temperature, print speed for 3D printing, printing orientation etc. have an important impact on the performance and quality of FDM components. Due to the correct parameters, the product of the required quality with a longer service life is obtained. The results of testing show that the quantity and choice of the right ingredient has a major impact on the mechanical properties and overall quality of the investigated product.

Digital Printing Performance of Cashmere Fabric under Acid or Alkaline Conditions

2011 ◽  
Vol 214 ◽  
pp. 240-244
Author(s):  
Yi Nong Yan ◽  
Xiang Ru Zhang ◽  
Dan Li ◽  
Jian Jian Xu
Keyword(s):  
Ph Value ◽  
Digital Printing ◽  
Dye Uptake ◽  
Printing Quality ◽  
Alkaline Conditions ◽  
Basic Reference ◽  
Minimal Damage ◽  
First Time ◽  
Pretreatment Solution

Pretreatment solution which was obtained by many experiments who had a good printing effect was used to do the digital printing experiment on the cashmere fabric. Printing performance of the cashmere fabric in different pH value was compared to improve the printing quality of the cashmere fabric. Digital printing experiments in the alkaline environment were carried out for the first time and the best pH value was found out which could ensure dye uptake, color fastness, anti-seepage property and minimal damage to cashmere fabric. The paper provided basic reference to the actual production.

Sign in / Sign up

Export Citation Format

Share Document