Thermodynamic assessment and optimisation of a biomass energy-based combined system for multigeneration

2019 ◽  
Vol 30 (3) ◽  
pp. 201
Author(s):  
Murat Ozturk ◽  
Nejat Tukenmez ◽  
Yunus Emre Yuksel
2019 ◽  
Vol 8 (2) ◽  
pp. 149 ◽  
Author(s):  
Afrooz Rahimi Ariae ◽  
Mehdi Jahangiri ◽  
Mehdi Haghgo Fakhr ◽  
Akbar Alidadi Shamsabadi

Biomass is a type of renewable energy that, in despite of its potentials and advantages including simple production technology, decreasing environmental issues, and energy generation capacity at the consumption site, has not been sufficiently utilized in Iran. Since, due to statistics, Isfahan enjoys remarkable prospects in terms of wind, solar and biomass energies, a combined system of indigenous energy sources for powering a cattle farm has been investigated and evaluated in this study. To evaluate the possibility of the optimal system for comparative reasons, the HOMER software was used. The designed hybrid system was a wind-solar-biomass generator that used a battery saver as backup. Although it seems that wind and solar energies have the highest potential for energy generation in Isfahan, the results showed that biomass, by itself, can provide the required power for a cattle farm. In fact, biomass energy was more economically efficient than wind and solar energies. Owing to the low electricity cost, generated from fossil fuels, in Iran, relative to a large number of countries, the findings revealed that using biomass for generating the electricity of a cattle farm will compensate the expenses by the mid-15th year and will generate profit for 9.5 years later. The results also showed that the solar cell-based hybrid system is cheaper than the wind turbine-based one. Regarding the price of per kWh of electricity produced, the results showed that the biomass generator system with the price 0.12 $/kWh is the cheapest, and the solar cell-based and wind turbine-based hybrid systems are 3.33% and 10.83% more expensive, respectively. The results can be used for electricity generation with minimum pollution and expenses in the same regions. ©2019. CBIORE-IJRED. All rights reserved


1993 ◽  
Vol 90 ◽  
pp. 399-407 ◽  
Author(s):  
JC Anglezio ◽  
C Servant ◽  
I Ansara

2019 ◽  
Vol 3 (1) ◽  
pp. 1-12
Author(s):  
Lauren K. D’Souza ◽  
William L. Ascher ◽  
Tanja Srebotnjak

Native American reservations are among the most economically disadvantaged regions in the United States; lacking access to economic and educational opportunities that are exacerbated by “energy insecurity” due to insufficient connectivity to the electric grid and power outages. Local renewable energy sources such as wind, solar, and biomass offer energy alternatives but their implementation encounters barriers such as lack of financing, infrastructure, and expertise, as well as divergent attitudes among tribal leaders. Biomass, in particular, could be a source of stable base-load power that is abundant and scalable in many rural communities. This case study examines the feasibility of a biomass energy plant on the Cocopah reservation in southwestern Arizona. It considers feedstock availability, cost and energy content, technology options, nameplate capacity, discount and interest rates, construction, operation and maintenance (O&M) costs, and alternative investment options. This study finds that at current electricity prices and based on typical costs for fuel, O&M over 30 years, none of the tested scenarios is presently cost-effective on a net present value (NPV) basis when compared with an alternative investment yielding annual returns of 3% or higher. The technology most likely to be economically viable and suitable for remote, rural contexts—a combustion stoker—resulted in a levelized costs of energy (LCOE) ranging from US$0.056 to 0.147/kWh. The most favorable scenario is a combustion stoker with an estimated NPV of US$4,791,243. The NPV of the corresponding alternative investment is US$7,123,380. However, if the tribes were able to secure a zero-interest loan to finance the plant’s installation cost, the project would be on par with the alternative investment. Even if this were the case, the scenario still relies on some of the most optimistic assumptions for the biomass-to-power plant and excludes abatement costs for air emissions. The study thus concludes that at present small-scale, biomass-to-energy projects require a mix of favorable market and local conditions as well as appropriate policy support to make biomass energy projects a cost-competitive source of stable, alternative energy for remote rural tribal communities that can provide greater tribal sovereignty and economic opportunities.


2009 ◽  
Author(s):  
Roger C. Conner ◽  
Tim O. Adams ◽  
Tony G. Johnson

2013 ◽  
Vol 14 (2) ◽  
Author(s):  
Noor Fachrizal

Biomass such as agriculture waste and urban waste are enormous potency as energy resources instead of enviromental problem. organic waste can be converted into energy in the form of liquid fuel, solid, and syngas by using of pyrolysis technique. Pyrolysis process can yield higher liquid form when the process can be drifted into fast and flash response. It can be solved by using microwave heating method. This research is started from developing an experimentation laboratory apparatus of microwave-assisted pyrolysis of biomass energy conversion system, and conducting preliminary experiments for gaining the proof that this method can be established for driving the process properly and safely. Modifying commercial oven into laboratory apparatus has been done, it works safely, and initial experiments have been carried out, process yields bio-oil and charcoal shortly, several parameters are achieved. Some further experiments are still needed for more detail parameters. Theresults may be used to design small-scale continuous model of productionsystem, which then can be developed into large-scale model that applicable for comercial use.


Sign in / Sign up

Export Citation Format

Share Document