The combined system of educating the deaf

1915 ◽  
Author(s):  
William A. Caldwell
Keyword(s):  
Combined System

Efficacy of a combined system of copper and silver and free chlorine for inactivation of Naegleria fowleri amoebas in water

1995 ◽  
Vol 31 (5-6) ◽  
pp. 119-122 ◽  
Author(s):  
J. M. Cassells ◽  
M. T. Yahya ◽  
C. P. Gerba ◽  
J. B. Rose
Keyword(s):  
Synergistic Effect ◽  
Exposure Time ◽  
Silver Ions ◽  
Free Chlorine ◽  
Log10 Reduction ◽  
Naegleria Fowleri ◽  
Combined System ◽  
Water Ph ◽  
Nægleria Fowleri ◽  
Time Required

Electrolytically generated copper and silver ions (400:40 and 800:80 μg/l) were evaluated, separately and combined with 1.0 mg/l free chlorine, for their efficacy in reducing the viable numbers of Naegleria fowleri amoebas in water (pH 7.3 and 23-25°C). Inactivation rates (k = log10 reduction/min) and T99 values (exposure time required to achieve a 99% or a 2 log10 reduction) of the disinfectants were determined. Copper and silver alone, at ratio of 400:40 to 800:80 μg/l caused no significant inactivation of N. fowleri even after 72 hours of exposure (k = 0.00017 and 0.00013, respectively). Addition of 1.0 mg/l free chlorine to water which contained 400:40 or 800:80 μg/l copper and silver resulted in enhanced inactivation rates (k = 0.458 and 0.515, respectively) compared to either chlorine alone (k = 0.33) or the metals alone. Water containing 800:80 μg/l copper and silver with 1.0 mg/l chlorine showed a T99 value of 3.9 minutes, while chlorine alone showed a T99 of 6.1 minutes. Enhanced inactivation of N. fowleri by a combined system of free chlorine and copper and silver may be attributed to the different mechanism that each disinfectant utilizes in inactivating the amoebas, and may suggest a synergistic effect.

Using International Trade Data for Evaluating the Product Specific Competitiveness and Supplied Product Quality of Countries: A Successful Example of Applied Theory

2006 ◽  
Vol 8 (2) ◽  
pp. 229 ◽  
Author(s):  
Thomas Cleff
Keyword(s):  
Product Quality ◽  
Longitudinal Section ◽  
Search Costs ◽  
Applied Theory ◽  
Present Level ◽  
Combined System ◽  
Trade Data ◽  
Simple Regression ◽  
Selection Of

This paper proposes a simple regression-based method for reducing the complexity of decisions in the international procurement process. Based on foreign trade data, the method uses indicators, which allow a product specific cross-section and longitudinal-section valuation of the international competitiveness and the supplied product quality of all potential supplier countries. The method thus provides a variety of information for procurement departments, including the present level and the dynamic of competitiveness and product quality for the potential supplier countries within every product group of the international product nomenclature (Combined System and the Harmonised System). Potential supplier countries --the companies of which have proven to be particularly competitive in the different product quality stages-- are identified. This pre-selection of countries enables the companies to limit their search for potential suppliers to the selected supplier countries. High search costs are subsequently reduced and trend prognoses can be constructed.

scholarly journals Exergy analysis and economic estimate of a novel solar and gas combined system

2021 ◽  
Vol 25 ◽  
pp. 100929
Author(s):  
Gang Wang ◽  
Shukun Wang ◽  
Tieliu Jiang ◽  
Zeshao Chen
Keyword(s):  
Exergy Analysis ◽  
Combined System

scholarly journals Compact Quantum Magnetometer System on an Agile Underwater Glider

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1092
Author(s):  
Brian R. Page ◽  
Reeve Lambert ◽  
Nina Mahmoudian ◽  
David H. Newby ◽  
Elizabeth L. Foley ◽  
...  
Keyword(s):  
Test Procedure ◽  
Reduction Process ◽  
Ground Truth ◽  
Sensor Technology ◽  
Magnetic Data ◽  
Magnetic Survey ◽  
Underwater Glider ◽  
Combined System ◽  
Extended Operation ◽  
Quantum Magnetometer

This paper presents results from the integration of a compact quantum magnetometer system and an agile underwater glider for magnetic survey. A highly maneuverable underwater glider, ROUGHIE, was customized to carry an increased payload and reduce the vehicle’s magnetic signature. A sensor suite composed of a vector and scalar magnetometer was mounted in an external boom at the rear of the vehicle. The combined system was deployed in a constrained pool environment to detect seeded magnetic targets and create a magnetic map of the test area. Presented is a systematic magnetic disturbance reduction process, test procedure for anomaly mapping, and results from constrained operation featuring underwater motion capture system for ground truth localization. Validation in the noisy and constrained pool environment creates a trajectory towards affordable littoral magnetic anomaly mapping infrastructure. Such a marine sensor technology will be capable of extended operation in challenging areas while providing high-resolution, timely magnetic data to operators for automated detection and classification of marine objects.

scholarly journals Utilising polyphenylene oxide for high exposure solar UVA dosimetry

2008 ◽  
Vol 8 (10) ◽  
pp. 2759-2762 ◽  
Author(s):  
D. J. Turnbull ◽  
P. W. Schouten
Keyword(s):  
Thin Film ◽  
Solar Spectrum ◽  
Combined System ◽  
High Exposure ◽  
Optical Absorbance ◽  
Preliminary Results ◽  
Polyphenylene Oxide ◽  
Film Form ◽  
Uncertainty Level ◽  
Uva Radiation

Abstract. A personal UV dosimeter that can quantitatively assess high exposure solar UVA exposures has been developed. The chemical polyphenylene oxide has been previously reported on its ability to measure high UVB exposures. This current research has found that polyphenylene oxide, cast in thin film form, is responsive to both the UVA and UVB parts of the solar spectrum. Further to this, the UVB wavelengths were filtered out with the use of mylar. This combined system responded to the UVA wavelengths only and underwent a change in optical absorbance as a result of UVA exposure. Preliminary results indicate that this UVA dosimeter saturates steadily when exposed to sunlight and can measure exposures of more than 20 MJ/m2 of solar UVA radiation with an uncertainty level of no more than ±5%.

scholarly journals Assessing dry weather flow contribution in TSS and COD storm events loads in combined sewer systems

2011 ◽  
Vol 63 (12) ◽  
pp. 2983-2991 ◽  
Author(s):  
M. Métadier ◽  
J. L. Bertrand-Krajewski
Keyword(s):  
Time Series ◽  
Oxygen Demand ◽  
Seasonal Effect ◽  
Storm Events ◽  
Combined System ◽  
Time Step ◽  
Urban Catchment ◽  
Sewer Systems ◽  
Continuous Discharge

Continuous high resolution long term turbidity measurements along with continuous discharge measurements are now recognised as an appropriate technique for the estimation of in sewer total suspended solids (TSS) and Chemical Oxygen Demand (COD) loads during storm events. In the combined system of the Ecully urban catchment (Lyon, France), this technique is implemented since 2003, with more than 200 storm events monitored. This paper presents a method for the estimation of the dry weather (DW) contribution to measured total TSS and COD event loads with special attention devoted to uncertainties assessment. The method accounts for the dynamics of both discharge and turbidity time series at two minutes time step. The study is based on 180 DW days monitored in 2007–2008. Three distinct classes of DW days were evidenced. Variability analysis and quantification showed that no seasonal effect and no trend over the year were detectable. The law of propagation of uncertainties is applicable for uncertainties estimation. The method has then been applied to all measured storm events. This study confirms the interest of long term continuous discharge and turbidity time series in sewer systems, especially in the perspective of wet weather quality modelling.

Sign in / Sign up

Export Citation Format

Share Document