Selection criteria of municipal solid wastes for thermo-chemical conversion processes by using proximate and ultimate analysis

2021 ◽  
Vol 24 (1) ◽  
pp. 1
Author(s):  
Renjith Krishnan ◽  
Lalhmingsanga Hauchhum ◽  
Rajat Gupta ◽  
Gokul Gopan
2020 ◽  
Vol 5 (4) ◽  
pp. 202-209
Author(s):  
Alexander Topal ◽  
◽  
Iryna Holenko ◽  
Luidmyla Haponych ◽  
◽  
...  

For the municipal solid waste (MSW) to be used in a proper way, it is necessary to implement clean technologies capable of thermal treatment of MSW and RDF in order to produce heat and electricity while meeting current ecological requirements. Nowadays, a number of technologies for MSW/RDF thermal treating are being used worldwide. Among them, the most proven technologies, applicable for industrial introduction, have been considered while analyzing their advantages/ disadvantages accounting for local conditions of Ukraine.


1997 ◽  
Vol 35 (8) ◽  
pp. 231-238 ◽  
Author(s):  
Tay Joo Hwa ◽  
S. Jeyaseelan

Conditioning of sludges improves dewatering characteristics and reduces the quantity of sludge to be handled. Anaerobic digested sludge collected from a sewage treatment plant contained 1.8% to 8% oil. The increase of specific resistance and capillary suction time (CST) with increasing oil content observed in these samples indicates the interference of oil in dewatering. It has been found that addition of municipal solid wastes incinerator fly ash decreases the specific resistances and capillary suction times of oily sludges rapidly up to 3% dosage. Beyond 3% fly ash, the decrease is less significant and the solids content in the sludge cake increases. This optimum dosage remains the same for sludges with varying oil contents from 1.8% to 12%. The total suspended solids of filtrate decreases with fly ash dosage but the toxic concentrations of heavy metals increases considerably. However at the optimum dosage of 3%, concentrations of heavy metals are within the limits for discharging into the sewers. The correlations of CST with the dewatering characteristics such as specific resistance, filter yield and corrected filter yield are established. These correlations can be used to obtain a quick prediction on dewaterability.


2021 ◽  
Vol 13 (3) ◽  
pp. 1462
Author(s):  
Faisal A. Osra ◽  
Huseyin Kurtulus Ozcan ◽  
Jaber S. Alzahrani ◽  
Mohammad S. Alsoufi

In many countries, open dumping is considered the simplest, cheapest, and most cost-effective way of managing solid wastes. Thus, in underdeveloped economies, Municipal Solid Wastes (MSW) are openly dumped. Improper waste disposal causes air, water, and soil pollution, impairing soil permeability and blockage of the drainage system. Solid Waste Management (SWM) can be enhanced by operating a well-engineered site with the capacity to reduce, reuse, and recover MSW. Makkah city is one of the holiest cities in the world. It harbors a dozen of holy places. Millions of people across the globe visit the place every year to perform Hajj, Umrah, and tourism. In the present study, MSW characterization and energy recovery from MSW of Makkah was determined. The average composition of solid waste in Makkah city is organic matter (48%), plastics (25%), paper and cardboard (20%), metals (4%), glass (2%), textiles (1%), and wood (1%). In order to evaluate energy recovery potential from solid waste in Kakia open dumpsite landfill, the Gas Generation Model (LandGEM) was used. According to LandGEM results, landfill gas (methane and carbon dioxide) generation potential and capacity were determined. Kakia open dump has a methane potential of 83.52 m3 per ton of waste.


2015 ◽  
Vol 78 ◽  
pp. 185-195 ◽  
Author(s):  
Nuno Couto ◽  
Valter Silva ◽  
Eliseu Monteiro ◽  
Sandra Teixeira ◽  
Ricardo Chacartegui ◽  
...  

Author(s):  
Nickolas J. Themelis

This report presents the results of a study that examined alternatives to landfilling the municipal solid wastes (MSW) of New York City. Detailed characterization of the wastes led to their classification, according to materials properties and inherent value, to “recyclable”, “compostable”, “combustible”, and “landfillable”. The results showed that the present rates of recycling (16.6%) and combustion (12.4%) in New York City can be increased by a) implementing an automated, modern Materials Recovery Facility (MRF) that separates the blue bag stream to “recyclables” and “combustibles”, and b) combusting the non-recyclable materials in a Waste-to-Energy (WTE) facility. Combustion of wastes to produce electricity is environmentally much preferable to landfilling. An advanced technology for combustion is that used in a modern Waste-to-Energy plant (SEMASS, Massachusetts) that processes 0.9 million metric tons of MSW per year, generates a net of 610 kWh per metric ton of MSW, recovers ferrous and non-ferrous metals, and has lower emissions than many coal-fired power plants.


Sign in / Sign up

Export Citation Format

Share Document